phrozen Sonic Mega 8K S LCD/MSLA Resin 3D Manual de utilizare

1. Introducere

Bine ați venit la manualul de utilizare pentru noul dumneavoastră phrozen Sonic Mega 8K S LCD/MSLA Resin 3D Printer. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity. Please read this manual thoroughly before operating the device.

2. Informații de siguranță

Siguranța dumneavoastră este primordială. Vă rugăm să respectați următoarele instrucțiuni de siguranță:

• Always operate the printer in a well-ventilated area to avoid inhaling resin fumes.
• Wear appropriate personal protective equipment (PPE), including nitrile gloves şi ochelari de protecție, when handling liquid resin or uncured prints.
• Avoid direct skin and eye contact with liquid resin. In case of contact, wash immediately with soap and water. Seek medical attention if irritation persists or if resin gets into eyes.
• Keep resin away from direct sunlight and heat sources. Store it in a cool, dark place in its original sealed container.
• Do not dispose of liquid resin down drains. Cure any waste resin under UV light before disposing of it as solid waste according to local regulations.
• Asigurați-vă că imprimanta este așezată pe o suprafață stabilă și plană.
• Nu atingeți piesele în mișcare în timpul funcționării.
• Deconectați imprimanta de la priză înainte de a efectua orice operațiune de întreținere sau curățare.

3. Conținutul pachetului

La despachetare, vă rugăm să verificați dacă sunt incluse toate următoarele articole:

• phrozen Sonic Mega 8K S 3D Printer
• Construiți placa
• Cuva de rasina
• Adaptor de alimentare și cablu
• USB Drive (with user manual and test files)
• Gloves (as listed in "whats_in_the_box")
• Racleta din plastic
• Razuta metalica
• Pâlnie
• Spare FEP Film
• Tool Kit (Allen wrenches, screws)

4. Produs terminatview

The phrozen Sonic Mega 8K S is a high-resolution LCD/MSLA resin 3D printer designed for rapid production and intricate detail. It features a large 15-inch monochrome LCD screen and a spacious build volume, making it ideal for printing multiple models or large-scale projects.

Caracteristici cheie:

• Unparalleled Productivity: High-speed system and large build plate allow for efficient batch printing, such as 80 detailed 1/32 scale models in under 1.5 hours.
• Revolutionary Production Efficiency: Combined with advanced ACF film and potent TR300 Resin, achieve speeds up to ten times faster than mid-size printers.
• Streamlined Convenience with Lift-Up Lid: The ingenious lift-up lid design optimizes space utilization and provides easy access to prints.
• Efficient Resin Management: A built-in metal drip hanger helps preserve resin post-printing and ensures safety during build plate cleaning.
• Exquisite 8K Printing Precision: Achieve extraordinary levels of intricacy with 8K resolution, capturing every nuance without compromising efficiency.

Figure 4.1: Phrozen Sonic Mega 8K S 3D Printer with a large printed model.

Figure 4.2: Key features of the Phrozen Sonic Mega 8K S.

Figure 4.3: Mass production capability with the 15-inch building plate.

Figure 4.4: Comparison of specifications between Sonic Mega 8K S and Sonic Mighty 8K.

Videoclip oficial al produsului:

Video 4.1: Produsul oficial s-a încheiatview of the phrozen Sonic Mega 8K S, showcasincaracteristicile și capacitățile sale.

5. Configurare

Follow these steps for the initial setup of your printer:

1. Unboxing: Carefully remove the printer and all accessories from the packaging. Inspect for any damage during transit.
2. Plasare: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat.
3. Conexiune de alimentare: Connect the power adapter to the printer and then to a suitable power outlet. Do not power on yet.
4. Instalați placa de construcție: Secure the build plate onto the Z-axis arm. Ensure it is firmly attached.
5. Instalați cuva de rășină: Place the resin vat onto the LCD screen platform. Ensure it is seated correctly and securely.
6. Z-Axis Calibration (Leveling):
   • Loosen the screws on the build plate.
   • Place a sheet of A4 paper (or the calibration card provided) on the LCD screen.
   • Lower the build plate until it firmly presses against the paper.
   • Tighten the build plate screws while maintaining pressure.
   • Raise the build plate slightly and remove the paper.
   • Confirm the Z-axis home position through the printer's touchscreen menu.
7. Resin Loading: Once leveled, carefully pour the desired resin into the resin vat, ensuring it does not exceed the maximum fill line.

6. Instrucțiuni de utilizare

To begin printing, follow these general steps:

1. Pregătirea modelului 3D: Use a compatible slicing software (e.g., Chitubox, Lychee Slicer) to prepare your 3D model. This involves adding supports, orienting the model, and setting print parameters (layer height, exposure time, lift speed, etc.) according to your resin and desired print quality.
2. Slice Model: Slice the prepared model into layers and save it as a `.ctb` or compatible file format onto the provided USB drive.
3. Introduceți unitatea USB: Insert the USB drive into the printer's USB port.
4. Select and Start Print: On the printer's touchscreen, navigate to the "Print" menu, select your file, and confirm to start the printing process.
5. Imprimare monitor: Observe the first few layers to ensure proper adhesion to the build plate. The printer will automatically proceed with the print.
6. Post-procesare: Once printing is complete, carefully remove the build plate. Use the metal scraper to detach the print from the build plate. Place the build plate on the drip hanger to allow excess resin to drip back into the vat.
7. Wash and Cure: Wash the uncured print in isopropyl alcohol (IPA) or a dedicated resin cleaner to remove excess liquid resin. After washing, cure the print under UV light (e.g., in a UV curing station) to fully harden it.

7. Întreținere

Regular maintenance ensures consistent print quality and extends the life of your printer:

• Placă de construcție curată: După fiecare imprimare, curățați placa de fabricație cu IPA și o lavetă moale.
• Curățarea cuvei de rășină: If changing resin colors or if there are cured resin bits in the vat, carefully empty the resin into a separate container (filter if necessary) and clean the vat with IPA and a soft cloth. Inspect the FEP film for damage.
• Inspect FEP Film: Regularly check the FEP film at the bottom of the resin vat for scratches, dents, or cloudiness. Replace it if damaged to prevent print failures and protect the LCD screen.
• Clean LCD Screen: If resin spills onto the LCD screen, immediately clean it with a soft, lint-free cloth and IPA. Avoid using sharp objects or abrasive materials.
• Lubricate Z-Axis: Periodically apply a small amount of lithium grease to the Z-axis lead screw to ensure smooth movement.
• Actualizări firmware: Check the official phrozen webpentru orice actualizări de firmware disponibile pentru a îmbunătăți performanța și a adăuga noi funcții.

8. Depanare

Iată câteva probleme comune și posibilele lor soluții:

9. Specificații

10. Garanție și asistență

For detailed warranty information and technical support, please refer to the official phrozen website-ul sau cuprinzătorul Manual de utilizare (PDF) provided with your printer. You may also contact Phrozen 3D Printer customer support for assistance.

The product is sold by Phrozen 3D Printer and is fulfilled by Amazon. It typically comes with a 30-day easy return policy.