Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. Introducere

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. Informații de siguranță

• Citiți cu atenție toate instrucțiunile înainte de utilizare.
• Acest dispozitiv este destinat numai utilizării în interior.
• Do not expose the remote control to moisture or extreme temperatures.
• Use only AAA batteries as specified. Ensure correct polarity when inserting batteries.
• A nu se lăsa la îndemâna copiilor.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• Suport pentru montare pe perete
• Șuruburi de montare (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. Produs terminatview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• Buton ON: Press to turn ON all linked devices.
• Buton OFF: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Brightness Up (☀): Apăsați pentru a crește luminozitatea.
• Brightness Down (☁): Apăsați pentru a reduce luminozitatea.
• Butonul M: Cycles through dynamic modes (if supported by the connected controller for single color).
• 30% luminozitate: Press to set brightness to 30%.
• 60% luminozitate: Press to set brightness to 60%.
• 100% luminozitate: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• Butonul S+: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. Configurare

5.1 Instalarea bateriei

The RC01RF remote control requires two AAA batteries (not included).

1. Localizați capacul compartimentului bateriilor pe spatele telecomenzii.
2. Deschideți capacul.
3. Introduceți două baterii AAA, asigurându-vă că polaritatea este corectă (+ și -).
4. Glisați capacul compartimentului bateriei la loc până când se aude un clic.

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 Instalare pe perete

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. Găuriți găuri pilot dacă este necesar.
4. Secure the wall mount holder to the surface using the provided screws.
5. Introduceți telecomanda în suport.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. Instrucțiuni de utilizare

6.1 Basic Control (All Zones)

• Pornire/Oprire: Apăsați tasta ON pentru a aprinde toate luminile conectate. Apăsați butonul OFF buton pentru a stinge toate luminile conectate.
• Reglarea luminozității: Atingeți Inel de luminozitate to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the Luminozitate crescută (☀) și Scăderea luminozității (☁) buttons for incremental adjustments.
• Luminozitate presetată: Use the dedicated buttons to quickly set brightness to 30%, 60%, sau 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• Selectați o zonă: Apăsați butonul dorit Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• Apăsați tasta Butonul M. to cycle through available dynamic modes.
• Utilizați S- şi S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. Întreținere

7.1 Înlocuirea bateriei

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. Urmați pașii din Secțiunea 5.1 pentru a deschide compartimentul bateriei.
2. Scoateți bateriile AAA vechi.
3. Introduceți două baterii AAA noi, respectând polaritatea corectă.
4. Închideți compartimentul bateriei.

Aruncați bateriile uzate conform reglementărilor locale.

7.2 Curățare

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8. Depanare

9. Specificații

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. Garanție și asistență

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.