Stealth JHT100

Stealth JHT100 32" Tower PTC Ceramic Heater Instruction Manual

Produs terminatview

The Stealth JHT100 is a 32-inch tower PTC ceramic heater designed for efficient and quiet heating in various indoor spaces. It features multiple operating modes, a programmable timer, and advanced safety protections.

Stealth JHT100 Tower Heater

Image: The Stealth JHT100 tower heater in a room setting, showcasing designul său elegant.

Informații de siguranță

Your safety is paramount. Please read and understand all safety instructions before operating this appliance.

  • Protecție împotriva răsturnării: The heater is equipped with an internal switch that automatically shuts off the unit if it is accidentally tipped over.
  • Protecție la supraîncălzire: An integrated overheat sensor will automatically turn off the heater if it reaches an unsafe temperature.
  • V0 Flame Retardant Materials: Constructed with V0 flame retardant materials for enhanced safety.
  • Polarized Safety Plug: Features a polarized plug to reduce the risk of electric shock.
  • Asigurați-vă întotdeauna că încălzitorul este așezat pe o suprafață fermă și plană.
  • Nu acoperiți încălzitorul și nu blocați orificiile de admisie/evacuare a aerului.
  • Păstrați materialele inflamabile la cel puțin 0.9 metri distanță de încălzitor.
  • Do not use in wet or moist locations.
Multiple Safety Protection features including Tip-Over Switch and Overheat Sensor

Image: Diagram illustrating the multiple safety features of the heater, including tip-over and overheat protection.

Conținutul pachetului

La despachetare, vă rugăm să vă asigurați că toate articolele enumerate mai jos sunt prezente și nedeteriorate:

  • Stealth JHT100 Tower Heater Unit
  • Detachable Base (2 halves)
  • Șuruburi de montare pentru bază
  • Remote Control (with pre-installed battery and plastic tab)
  • Manual de instructiuni

Înființat

  1. Ansamblu de bază:

    Align the two halves of the detachable base and snap them together. Ensure the power cord passes through the designated slot in the base. Secure the base to the bottom of the heater unit using the provided screws. This step is crucial for stability and safety.

    Assembling the base of the tower heater

    Image: A person demonstrating the assembly of the heater's base, showing the separate base parts and the attachment points.

  2. Configurarea telecomenzii:

    The remote control comes with a plastic tab separating the battery from the contacts to preserve battery life. Gently pull out this plastic tab before first use. The remote requires a CR2025 lithium cell 3V battery.

  3. Conexiune de alimentare:

    Plug the polarized power cord into a suitable 120V AC electrical outlet. Ensure the outlet is in good condition and not overloaded.

Instrucțiuni de operare

The Stealth JHT100 heater can be operated using the touch control panel on top of the unit or the included remote control.

Top control panel of the Stealth JHT100 heater

Image: Close-up of the touch control panel on top of the heater, showing the power, mode, oscillation, and timer buttons.

1. Pornire/Oprire

  • Comutator principal de alimentare: Locate the main power switch at the back of the heater, near the base. Flip it to the "ON" position. A red indicator light will appear on the front display.
  • Unit Power Button: Apăsați tasta Buton de pornire (Pictograma butonului de alimentare) de pe panoul de control sau de pe telecomandă pentru a porni sau opri încălzitorul.

2. Heat Modes

The heater offers 4 modes: Low Heat (700W), High Heat (1500W), and Fan Only. The unit cycles through these modes with each press of the Mode button.

  • Apăsați tasta Butonul de mod (Pictograma butonului de mod) to cycle through the available heating and fan modes. The red indicator light will adjust to reflect the selected mode (e.g., longer bar for higher heat).
PTC Heating Elements with Low Heat 700W and High Heat 1500W

Image: Diagram showing the internal PTC heating elements and the two heat settings: Low Heat (700W) and High Heat (1500W).

3. Oscilația

Activate the 70° wide oscillation feature to distribute warmth evenly across a larger area.

  • Apăsați tasta Buton de oscilație (Pictogramă buton de oscilație) to start or stop the oscillation function.
70 degree auto oscillation feature of the heater

Imagine: De sus view illustrating the 70-degree auto oscillation feature, showing heat distribution across a room.

4. Funcția Timer

Set a timer for automatic shut-off, ranging from 1 to 6 hours, in 1-hour increments.

  • Apăsați tasta Butonul cronometrului (Pictogramă buton temporizator) repeatedly to select the desired shut-off time (1H, 2H, 3H, 4H, 5H, 6H).
  • To cancel the timer, continue pressing the Timer button until no timer indicator is displayed, or press it a seventh time to cycle back to no timer.
Quiet operation and 6-hour timer feature for comfortable sleep

Image: A person sleeping peacefully with the heater operating quietly in the background, highlighting the 6-hour timer feature.

5. Telecomanda

The remote control duplicates all functions available on the unit's top control panel for convenient operation from a distance. Store the remote in the designated slot on the back of the heater when not in use to prevent misplacement.

Întreţinere

Întreținerea regulată asigură performanța optimă și durata de viață a încălzitorului dumneavoastră.

  • Curățarea filtrului de aer: The heater features a removable and washable air filter located at the back. Periodically remove the filter and clean it with mild soap and warm water to prevent dust buildup and maintain air quality. Ensure the filter is completely dry before reinserting.
  • Curatenie exterioara: Ștergeți exteriorul încălzitorului cu o lavetă moale șiamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
  • Always unplug the heater from the power outlet before performing any cleaning or maintenance.
Illustration of the removable and washable air filter

Image: Diagram showing the removable mesh air filter at the back of the heater, indicating it can be cleaned.

Depanare

If your heater is not functioning as expected, please consult the following common issues and solutions:

ProblemăCauza posibilaSoluţie
Încălzitorul nu pornește.
  • Întrerupătorul principal este oprit.
  • Unitatea nu este conectată.
  • Comutatorul de răsturnare este activat.
  • Protecție la supraîncălzire activată.
  • Ensure main power switch at the back is ON.
  • Verificați dacă cablul de alimentare este conectat corect la o priză funcțională.
  • Ensure the heater is upright on a flat surface.
  • Deconectați unitatea, așteptați 10-15 minute să se răcească, apoi conectați-o din nou.
Încălzitorul se oprește pe neașteptate.
  • Comutatorul de răsturnare este activat.
  • Protecție la supraîncălzire activată.
  • Funcția temporizatorului a expirat.
  • Ensure the heater is upright on a flat surface.
  • Deconectați unitatea, așteptați 10-15 minute să se răcească, apoi conectați-o din nou.
  • Check timer settings; adjust or cancel if necessary.
Heat output is low.
  • Low heat mode selected.
  • Filtrul de aer este murdar.
  • Dimensiunea camerei este prea mare pentru încălzitor.
  • Select a higher heat mode (High Heat 1500W).
  • Curățați filtrul de aer conform instrucțiunilor de întreținere.
  • This heater is designed for small to medium rooms (up to 269 sq ft).

Specificații

  • Marca: Stealth
  • Număr de model: JHT100
  • Factor de formă: Turn
  • Putere de căldură: 1500 wați
  • Ampepoca: 12.5 Amps
  • Dimensiuni produs: 8 x 11 x 32 inci
  • Greutatea articolului: 10.58 lire sterline
  • Sursa de alimentare: Electric cu fir
  • Metoda de incalzire: Convection, Forced Air
  • Oscilaţie: Oscilație largă de 70°
  • Cronometru: 1-6 ore
  • Caracteristici de siguranță: Tip-Over Protection, Overheat Protection, V0 Flame Retardant Materials, Polarized Safety Plug
Stealth JHT100 heater with 32 inch height and carry handle

Image: The 32-inch tall heater with a convenient carry handle, illustrating its portable design.

Garanție și suport

Stealth products are covered by a 24-month manufacturer and distributor warranty. This warranty covers defects in materials and workmanship of the enclosed product. It does not cover problems caused by misuse, abuse, acts of God (such as floods, hurricanes), consequential, or incidental damages.

The warranty coverage terminates if you sell or otherwise transfer the ownership of the product.

If you believe you have a defective product, please contact us first. We will assist you to solve the issues within 24 hours.

For support, please refer to the contact information provided on your warranty card or visit the official Stealth website-ul.

Documente conexe - JHT100

Preview Manualul de utilizare al remorcilor Stealth: Ghid de siguranță, utilizare și întreținere
Manual de utilizare complet pentru remorcile Stealth, care acoperă informații esențiale de siguranță, pregătirea pentru remorcare, instrucțiuni operaționale, programe de întreținere și îngrijirea anvelopelor pentru a asigura o utilizare sigură și fiabilă.
Preview Ghid de pornire rapidă pentru covorașul de gaming Stealth Light Up XL
Ghid oficial de pornire rapidă pentru covorașul de gaming Stealth Light Up XL, care oferă instrucțiuni de configurare, informații despre garanție, măsuri de precauție și date de contact pentru asistență.
Preview Ghid de pornire rapidă pentru seria Stealth VR - Îmbunătățiți-vă experiența VR
Ghid rapid de instalare pentru accesoriile din seria Stealth VR, detalii despre componente și compatibilitate cu căștile Meta Quest 2 și Meta Quest 3/3S. Începeți cu configurația VR.
Preview Manual de utilizare pentru aspiratorul umed-uscat și mopul STEALTH ECVP01
Manual de utilizare complet pentru aspiratorul umed-uscat și mopul STEALTH ECVP01, inclusiv instrucțiuni de siguranță, asamblare, utilizare, curățare, întreținere, depanare și specificații. Aflați cum să utilizați și să îngrijiți aspiratorul ECVP01 pentru performanțe optime.
Preview Aparatul de curățare nu funcționează: Ghid de depanare și calibrare
Depanați problemele aspiratorului dvs. cu ajutorul acestui ghid pas cu pas. Aflați procedura de calibrare a rezervorului de apă curată pentru aspiratoarele umede/uscate pentru a restabili funcționarea corectă. Include un link către un tutorial video.
Preview Date de prezentare pentru sistemul de pompă de căldură fără conducte pentru mai multe camere STEALTH SC-27Z-HH-M3
Date detaliate de prezentare pentru sistemul de pompă de căldură fără conducte pentru mai multe camere STEALTH SC-27Z-HH-M3 de 24000 BTU, inclusiv caracteristici generale, clasificări ale sistemului, specificații ale unității exterioare, dimensiuni, date de performanță și combinații de capacități.