Manual de instrucțiuni pentru kitul de pornire pentru scurgeri de apă YoLink (YS1603+4YS7906)

1. Introducere

The YoLink Water Leak Starter Kit provides a comprehensive solution for detecting water leaks and preventing potential damage in your home or property. This kit includes a YoLink Hub and four (4) Leak Sensor 4 units, each equipped with a built-in 105 dB audible alarm. Utilizing LoRa (Long-Range) technology, the system offers reliable coverage and extended battery life, ensuring you receive timely alerts via app, email, or SMS/text messages. The system also supports Device-to-Device (D2D) communication, allowing sensors to trigger local alarms or shut-off valves even without an internet connection.

2. Conținutul trusei

Your YoLink Water Leak Starter Kit includes the following components:

• 1 x YoLink Hub (Model: YS1603)
• 4 x YoLink Leak Sensor 4 (Model: YS7906)
• 1 x cablu Ethernet
• 1 x Cablu de alimentare USB
• 1 x adaptor de alimentare USB
• 8 x AAA Batteries (2 per sensor, pre-installed)

Figure 1: YoLink Water Leak Starter Kit components.

3. Instrucțiuni de configurare

3.1. YoLink App Installation

1. Descărcați YoLink App din App Store (iOS) sau Google Play Store (Android).
2. Deschideți aplicația și creați un cont nou sau conectați-vă dacă aveți deja unul.

3.2. Hub Setup

1. Connect the YoLink Hub to power using the provided USB cable and power adapter.
2. Connect the Hub to your internet router using the provided Ethernet cable. Ensure the internet indicator light on the Hub turns solid blue.
3. In the YoLink App, tap the "+" icon or "Add Device" to add the Hub. The app should automatically detect the Hub. Follow the on-screen prompts to complete the setup.

3.3. Leak Sensor 4 Setup

1. Ensure the AAA batteries are correctly installed in each Leak Sensor 4.
2. In the YoLink App, tap the "+" icon or "Add Device".
3. Scan the QR code located on the back of each Leak Sensor 4.
4. Follow the app's instructions to name each sensor and assign it to a specific room or location (e.g., "Kitchen Sink", "Water Heater", "Laundry Room"). This helps in identifying the leak source quickly.

Figure 2: Easy setup process for YoLink devices.

3.4. Testarea inițială

After setting up each sensor, it is recommended to perform an initial test:

• Place a small amount of water (e.g., a damp paper towel) on the two metal prongs located on the bottom of the Leak Sensor 4.
• The sensor should emit a 105 dB audible alarm, and you should receive an alert notification on your YoLink App, email, and/or SMS/text message.
• Remove the water to silence the alarm.

4. Instrucțiuni de utilizare

4.1. Plasarea senzorului

Strategically place your Leak Sensor 4 units in areas prone to water leaks, such as:

• Sub chiuvete (bucătărie, baie)
• Lângă încălzitoarele de apă
• În spatele toaletelor
• Lângă mașinile de spălat sau mașinile de spălat vase
• În subsoluri sau camere de utilități
• Lângă frigidere cu aparate de gheață

Ensure the metal prongs on the bottom of the sensor are in direct contact with the surface where water might accumulate. The sensor can also detect drips from above if water collects on its top surface.

Figure 3: Recommended placement areas for Leak Sensors.

4.2. Alert System

Upon detecting water, the Leak Sensor 4 will:

• Activate its built-in 105 dB audible siren for immediate local notification.
• Send instant notifications to your YoLink App.
• Send email and/or SMS/text alerts to your registered contacts.

Figura 4: Example of instant leak alerts received on a smartphone.

4.3. LoRa Long-Range Technology

YoLink devices utilize LoRa technology, providing extended communication range (up to 1/4-mile open air) and reliable signal penetration through walls and floors, even in large homes or multi-story buildings. This ensures consistent connectivity where standard Wi-Fi might struggle.

Figure 5: YoLink's long-range coverage in a typical home environment.

4.4. Device-to-Device (D2D) Communication

YoLink's D2D technology allows sensors to communicate directly with other YoLink devices, such as sirens or automatic shut-off valves, even if your internet or power is out. This provides an essential layer of local protection during outages.

Figure 6: D2D functionality: Leak sensor triggering a shut-off valve.

4.5. Integrare Smart Home

The YoLink system is compatible with popular smart home platforms, including Amazon Alexa, IFTTT, and Home Assistant, allowing for advanced automation and voice control.

Figure 7: YoLink's compatibility with various smart home platforms.

5. Întreținere

5.1. Înlocuirea bateriei

Each Leak Sensor 4 is powered by two (2) AAA alkaline batteries, offering up to 5 years of typical battery life. The YoLink App will display the battery level for each sensor, allowing you to replace them proactively when low.

Figure 8: Leak Sensor 4 with its AAA batteries, highlighting the 5-year battery life.

5.2. Curățarea senzorului

Periodically inspect the metal prongs on the bottom of the Leak Sensor 4 for any dirt or debris that might interfere with detection. Clean with a dry cloth if necessary.

6. Depanare

6.1. Nu s-au primit alerte

• Check Hub Connectivity: Ensure your YoLink Hub is powered on and connected to the internet (solid blue indicator light).
• Check Sensor Battery: Verify the battery level of the sensor in the YoLink App. Replace batteries if low.
• Verificați amplasarea senzorului: Ensure the sensor's metal prongs are making proper contact with the surface.
• Notificări ale aplicației: Confirm that app notifications are enabled for YoLink in your phone's settings.
• Email/SMS Settings: Verify your email and SMS settings within the YoLink App are correct and up-to-date.

6.2. Alarme false

• Factori de mediu: High humidity or condensation in certain areas might trigger false alarms. Relocate the sensor if this is a persistent issue.
• Sensor Contamination: Clean the metal prongs on the sensor to ensure no residue is causing a false positive.

6.3. Dispozitivul nu se conectează

• Hub Online: Ensure the Hub is online and functioning correctly before attempting to pair sensors.
• Reset Sensor: If a sensor fails to pair, try resetting it (refer to the individual sensor manual for specific reset instructions, usually involving pressing the SET button).
• Versiunea aplicației: Ensure your YoLink App is updated to the latest version.

7. Specificații

8. YoLink Ecosystem & Advanced Features

The YoLink Hub supports over 300 YoLink devices, allowing you to expand your smart home system with various sensors (motion, contact, temperature), smart plugs, and controllers. The ecosystem is designed for scalability and robust performance.

9. Garanție și asistență

For warranty information and technical support, please refer to the official YoLink website or contact YoLink customer service. Protection plans may also be available for extended coverage.