KAIWEETS KC602 Smart Clamp Manual de utilizare al contorului

1. Introducere

This manual provides comprehensive instructions for the safe and effective operation of the KAIWEETS KC602 Smart Clamp Meter. Please read this manual thoroughly before use and retain it for future reference.

Informații de siguranță

Always adhere to local and national safety codes. Use appropriate personal protective equipment (PPE) when working with electrical circuits. Do not exceed the maximum input values specified for the meter. Disconnect power to the circuit before making connections or disconnections.

2. Produs terminatview și Componente

The KAIWEETS KC602 is an intelligent clamp meter designed for precise measurement of AC/DC current, AC/DC voltage, frequency, duty cycle, resistance, capacitance, diode, continuity, and temperature. It features a smart measurement mode, True-RMS, and a high-definition color screen.

Figure 2.1: KAIWEETS KC602 Smart Clamp Meter and included accessories, including test leads, K-type thermocouple, and carrying case.

Figure 2.2: Key features of the KC602, including automatic shutdown, CAT.IV 600V safety rating, and automatic range selection for ease of use.

Continutul pachetului:

• 1x KAIWEETS KC602 Smart Clamp Metru
• 1x Test Leads
• 1x K-Type Thermocouple
• 2x baterii AAA
• 1x Husă de transport
• 1x Manual de utilizare

3. Configurare

3.1 Instalarea bateriei

1. Localizați capacul compartimentului bateriilor pe spatele contorului.
2. Folosiți o șurubelniță pentru a deschide compartimentul bateriei.
3. Introduceți 2 baterii AAA, asigurându-vă că polaritatea este corectă (+ și -).
4. Puneți la loc capacul compartimentului bateriei și fixați-l cu șurubul.

3.2 Pornirea inițială și calibrarea

Upon first power-on or after battery replacement, the KC602 performs an automatic calibration. This process ensures measurement accuracy.

Figure 3.1: The meter displays "CAL" during automatic calibration upon power-on, followed by entering Smart Mode.

The meter will automatically enter Smart Mode, which intelligently recognizes measurement signals.

4. Instrucțiuni de utilizare

4.1 Smart Measurement Mode

In Smart Mode, the KC602 automatically identifies and measures AC/DC Voltage, Resistance, and Continuity. Simply connect the test leads to the circuit, and the meter will display the relevant measurement.

Figure 4.1: The KC602 operating in Smart Mode, automatically detecting measurement signals and displaying results on its HD color screen.

4.2 Funcții specifice de măsurare

To access specific measurement functions beyond Smart Mode, press the ANGAJAT pentru a parcurge modurile disponibile.

Figure 4.2: The KC602 offers a wide range of functions to meet diverse measurement needs.

Măsurarea curentului AC/DC

To measure AC/DC current, select the current mode. Open the clamp jaws and enclose a single conductor. The display will show the current reading.

Figure 4.3: Top image shows AC/DC Voltage measurement using test leads. Bottom image shows AC/DC Current measurement using the clamp jaws around a single conductor.

AC / DC Voltage Măsurare

Connect the red test lead to the VΩHz input jack and the black test lead to the COM input jack. Select the voltage mode and connect the test leads in parallel to the circuit or component to be measured.

Măsurarea curentului de pornire

The inrush current function measures the initial surge of current when a device is powered on. This is useful for diagnosing motor or circuit startup issues. The measurement time is approximately 100ms.

Figure 4.4: The KC602 measuring inrush current, with a measurement range of 5 to 600 A.

Vol. Fără contacttagTestul e (NCV)

Funcția NCV permite volumultage detection without direct contact. Hold the NCV sensor near the conductor. The meter will indicate the presence of AC voltage with an audible beep and visual indicator.

Figure 4.5: The KC602's NCV function indicating low voltage (left) and high voltage (right) without physical contact.

Continuity, Diode, and Capacitance Tests

These functions are essential for checking circuit integrity, diode functionality, and capacitor values.

Figure 4.6: Demonstrations of Continuity Test (left), Diode Test (center), and Capacitance Test (right) using the KC602.

Măsurarea temperaturii

Use the included K-type thermocouple to measure temperature. Insert the thermocouple into the appropriate input jacks and place the probe on the surface or in the environment to be measured.

Figura 4.7: Examples of various measurements: AC/DC Current (top left), AC/DC Voltage (top right), NCV (bottom left), and Temperature (bottom right).

5. Întreținere

5.1 Curățare

Pentru a curăța contorul, ștergeți carcasa cu un prosop de hârtie.amp cloth and mild detergent. Do not use abrasives or solvents. Ensure the meter is powered off and disconnected from any circuits before cleaning.

5.2 Înlocuirea bateriei

When the battery power indicator appears on the display, replace the batteries promptly to ensure accurate measurements. Refer to Section 3.1 for battery installation instructions.

5.3 Depozitare

Dacă aparatul de măsură nu este utilizat pentru o perioadă lungă de timp, scoateți bateriile pentru a preveni scurgerile. Depozitați aparatul de măsură într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.

5.4 Oprire automată

The KC602 features an automatic shutdown function to conserve battery life. If no operation is performed within 15 minutes, the meter will automatically power off.

Figure 5.1: The meter's automatic shutdown feature activates after 15 minutes of inactivity, indicated by a countdown.

6. Depanare

7. Specificații

8. Garanție și asistență

KAIWEETS provides 3 years of customer service and lifetime technical support for the KC602 Smart Clamp Meter. If you have any concerns or require assistance, please contact KAIWEETS customer support.

For support, please visit the official KAIWEETS website or contact the seller directly through the platform where the product was purchased.