Manual de utilizare pentru kitul de telecomandă wireless BTF-LIGHTING RF 2.4GHz și controler LED RGB C03RF Tuya

1. Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RF 2.4GHz Wireless Remote (RC03RFB) and C03RF Tuya RGB LED Controller Kit. This kit is designed to control PWM RGB LED strips, offering versatile lighting options and smart home integration.

2. Informații de siguranță

• Asigurați-vă că sursa de alimentare voltage matches the requirements of your LED strip and controller (DC5V/DC12V/DC24V).
• Do not exceed the maximum allowable current for the controller's power interfaces (5A and 12A respectively).
• Acest produs este destinat numai utilizării în interior.
• Păstrați dispozitivul departe de apă, umiditate și temperaturi ridicate.
• Do not attempt to disassemble or modify the device. Contact qualified personnel for service.
• Batteries for the remote control are not included and must be purchased separately.

3. Conținutul pachetului

Vă rugăm să verificați dacă toate articolele sunt prezente în coletul dumneavoastră:

• 1x RC03RFB Wireless Remote
• 1x C03RF Tuya Controller
• 1x RF Remote Bracket
• 2x șuruburi
• 1x Double-sided Adhesive Pad
• 1x RC03RF Remote Control Manual
• 1x C03RF Controller Manual

Note: The Tuya Gateway (GW01W) and 3A batteries for the remote are not included and must be purchased separately.

Image: Components of the BTF-LIGHTING RF 2.4GHz Wireless Remote and C03RF Tuya RGB LED Controller Kit, including the remote, controller, and mounting bracket.

4. Specificații

5. Configurare

5.1. Cablarea controlerului LED

Ensure your LED strip is compatible with this controller (PWM RGB 4-wire). Connect the LED strip to the controller's output terminals (V+, R, G, B) and the appropriate DC power supply to the controller's input terminals (V+, V-). The input voltagtrebuie să se potrivească cu voltage of your LED strip (e.g., 12V strip requires a 12V power supply).

Image: Diagram illustrating the connection of a power supply and an RGB LED strip to the C03RF controller.

5.2. Asocierea telecomenzii

To pair the RC03RFB remote with the C03RF controller:

1. Asigurați-vă că controlerul este oprit.
2. Porniți controlerul.
3. Within 3 seconds of powering on, press the 'ON' button on the remote control.
4. The connected LED strip should flash to indicate successful pairing.

5.3. Tuya Gateway Connection (Optional)

For smart home integration and app control, a GW01W Tuya Gateway (sold separately) is required. Follow these steps:

1. Alimentați-vă sursele de lumină: Connect the LED strip to the power supply and the C03RF controller.
2. Alimentați gateway-ul GW01W Tuya: Install the gateway within 30m of your lights and near your WiFi router.
3. Download the Smart Life or Tuya Smart App: Create an account, add the device, then select the device working WiFi and enter the password. Ensure to select 2.4G WiFi. The gateway indicator should show blue light (Linking). When the light shows green light, the connection is successful.
4. Link the Lights or Controller to GW01W Gateway: Opriți lamps you want to link, then switch them on again. Press the 'SET' button once on the 2.4G gateway within 5 seconds. The lights will blink 3 times slowly, indicating successful linking.

Image: Visual guide for connecting the LED strip controller to the Tuya Smart Life app using the GW01W Tuya Gateway.

6. Instrucțiuni de utilizare

6.1. Remote Control Functions (RC03RFB)

The RC03RFB remote features a touch wheel and various buttons for comprehensive control:

Image: Labeled diagram of the RC03RFB remote control, showing the color ring, power buttons, mode buttons, brightness/speed controls, and zone selection buttons.

• ON/OFF: Power on/off the connected lights.
• Inel de culoare: Touch to select from 16 million colors.
• Pilotul Lamp: Indicates remote activity.
• Moduri dinamice: Comutați prin diverse efecte de iluminare preprogramate.
• Luminozitate +/-: Reglați nivelul de luminozitate.
• 7 Colors Switching: Quickly switch between primary colors.
• Color Temp/Saturation: Adjust color temperature or saturation (if applicable to your LED strip).
• Lumină albă: Activate white light mode.
• Viteza +/-: Reglați viteza modurilor dinamice.
• Zone ON/(un)link Button (1-4): Turn on/off specific zones or link/unlink controllers to zones.
• Zone OFF/Night Light Mode: Turn off a specific zone or activate a low-brightness night light mode.

6.2. Controlul grupului

The remote supports 4 independent zones. You can assign multiple controllers to a single zone, allowing for synchronized control of various lighting areas. The 2.4GHz RF wireless transmission allows for control up to 98 feet (30 meters) in open environments.

Image: Illustration of 2.4GHz wireless transmission enabling 4-zone control across different rooms in a house.

6.3. Auto-Transmitting Function

The controllers feature an auto-transmitting function. One controller can transmit signals from the remote to another controller within 30 meters. As long as there is a controller within 30 meters of the remote or another controller, the effective control distance can be extended significantly.

Image: Diagram showing how the auto-transmitting function extends the remote control distance by relaying signals between controllers.

6.4. App Control Features (with Tuya Gateway)

When connected via the Tuya Gateway, the Smart Life or Tuya Smart app unlocks additional features:

• 16 milioane de culori: Access a full spectrum of colors.
• Reglarea luminozității și a culorii: Fine-tune light output and color temperature.
• Scene dinamice: Choose from various pre-set or custom lighting scenes.
• Ritmul muzical: Synchronize lights with music.
• Setare cronometru: Programați aprinderea/stingerea luminilor la anumite ore.
• Control vocal: Compatible with third-party voice assistants like Amazon Alexa and Google Home.
• Partajarea dispozitivului: Împărțiți controlul cu membrii familiei.
• Atingeți și rulați și automatizare: Create custom automation routines.
• Don't Disturb Mode: Prevents lights from turning on after power outages until manually activated twice.

7. Întreținere

• Clean the remote and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Replace remote batteries (3A, not included) when the control range decreases or the remote becomes unresponsive.
• Asigurați-vă că toate conexiunile rămân sigure și lipsite de coroziune.

8. Depanare

9. Videoclip oficial al produsului

Urmărește acest videoclip oficial pentru mai mult de...view of the BTF-LIGHTING 2.4GHz RF LED Controller Series, demonstrating its features and compatibility.

10. Garanție și asistență

For warranty information and technical support, please refer to the documentation included with your product or visit the official BTF-LIGHTING website-ul. Păstrați chitanța de achiziție pentru cererile de garanție.