Manual de instrucțiuni pentru biroul electric ErGear

Introducere

This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Electric Standing Desk. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.

Informații de siguranță

Măsuri importante de siguranță:

• Assemble the desk in a stable location.
• Do not exceed the desk's maximum weight capacity of 80kg.
• Țineți copiii și animalele de companie departe de birou în timpul funcționării.
• Asigurați-vă că nu există obstacole în calea mișcării biroului (în sus sau în jos).
• Nu stați și nu stați în picioare pe birou.
• Deconectați alimentarea înainte de curățare sau întreținere.
• If any unusual noise or movement occurs, stop operation immediately and consult the troubleshooting section or contact customer support.

Caracteristicile produsului

• Durabilitate ridicată: Tested for 50,000 lift cycles, featuring aerospace-grade lifting column connectors for stability.
• Enhanced Motor Performance: Robust frame and reinforced motor provide superior load capacity and lifting power, supporting up to 80kg.
• Înălțime reglabilă: Seamless height adjustment from 72cm to 118cm. Ideal for switching between sitting and standing positions.
• Presetari de memorie: Store up to 4 preferred height settings for quick adjustments.
• Low VOC Coating: Constructed with low Volatile Organic Compound (VOC) paint, meeting EPA and CARB emission standards for a healthier indoor environment.
• Funcționare silențioasă: Smooth and quiet lifting mechanism minimizes distractions.
• Management integrat al cablurilor: Includes cable ties and a cable hole cover for an organized workspace.
• Accessory Hook: Convenient hook for hanging bags or headphones.

Conținutul pachetului

Vă rugăm să verificați dacă toate componentele sunt prezente înainte de a începe asamblarea.

Imagine: All components of the ErGear Electric Standing Desk laid out for assembly.

Instructiuni de asamblare

Follow these steps carefully to assemble your ErGear Electric Standing Desk. A detailed assembly video is provided below to guide you through the process.

Step 1: Attach the Lifting Frame

As shown in the video from 0:06 to 0:17, secure the lifting frame components using the provided screws. Ensure all connections are tight and stable.

Imagine: Illustration of attaching the desk legs to the main frame.

Step 2: Install the Brackets and Transmission Rod

Refer to the video from 0:17 to 0:43. Insert the transmission rod into the left lifting frame and secure the brackets. Ensure the left and right lifting frames are at the same height. If adjustment is needed, rotate the transmission rod clockwise to lower the left leg frame, or counter-clockwise to raise it.

Step 3: Attach the Desktop and Controller

Watch the video from 0:43 to 1:04. Carefully place the desktop onto the assembled frame. Secure it using the provided screws. Attach the control panel to the underside of the desktop.

Pasul 4: Conectați cablurile

The video segment from 1:04 to 1:12 demonstrates connecting all necessary cables to the control unit and motor. Use the provided cable management clips to keep cables tidy and prevent entanglement.

Imagine: Cable management clips used to organize power and control cables.

Step 5: Install Cable Hole Covers

As shown in the video from 1:12 to 1:16, insert the cable hole covers into the designated openings on the desktop for a neat finish and to protect cables.

Imagine: The fully assembled ErGear Electric Standing Desk, ready for use.

Instrucțiuni de operare

Reglarea înălțimii

• Connect the desk to a power outlet.
• Utilizați Sus (∧) şi Jos (∨) buttons on the control panel to manually adjust the desk height. The current height will be displayed on the panel.

Imagine: Close-up of the control panel with height adjustment buttons and memory presets.

Using Memory Presets

• Reglați biroul la înălțimea dorită folosind butoanele Sus/Jos.
• Apăsați tasta „M.” button, then press one of the numbered buttons (1, 2, 3 sau 4) within 3 seconds to save the current height.
• To recall a saved height, simply press the corresponding numbered button (1, 2, 3 sau 4). The desk will automatically move to the stored position.

Imagine: The control panel highlighting the memory preset buttons (1, 2, 3, 4).

Întreţinere

• curatenie: Ștergeți suprafața și cadrul biroului cu o lavetă moale șiamp Evitați utilizarea de produse de curățare abrazive sau solvenți.
• Organizare de cabluri: Regularly check cables for wear or damage. Ensure they are properly secured to prevent snagging during height adjustments.
• Lubrifiere: The lifting mechanism is designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by customer support.
• Inspecţie: Periodically inspect all screws and connections to ensure they remain tight.

Depanare

If you encounter any issues with your ErGear Electric Standing Desk, please refer to the following common solutions:

If the problem persists after attempting these solutions, please contact ErGear customer support.

Specificații

• Marca: ErGear
• Model: EGESD4/5/6 Series
• Culoare: Vintage (Desktop) / Black (Frame)
• Dimensiune: 120 x 60 cm
• Dimensiuni produs: 120 (Depth) x 60 (Width) x 72-118 (Height) cm
• Capacitate de greutate: 80 kg
• Interval de reglare a înălțimii: 72 cm până la 118 cm
• Desk Type: Birou permanent
• Material de baza: Metal
• Tipul finisajului: Pictat
• Caracteristica speciala: Funcție reglabilă pe înălțime
• Tip camera: Birou

Garanție și suport

Your ErGear Electric Standing Desk comes with a Garanție de 2 an de la producător. For warranty claims, technical support, or any inquiries, please contact ErGear customer service through your purchase platform or visit the official ErGear store.

Vânzător: BSQ Official JP

Pentru asistență suplimentară, vă rugăm să vizitați Magazinul ErGear pe Amazon.