KAIWEETS KC602 Smart Digital Clamp Manual de utilizare al contorului

1. Introducere

The KAIWEETS KC602 Smart Digital Clamp Meter is an advanced, auto-ranging multimeter designed for precise electrical measurements. Featuring D-shaped jaws, an HD color screen, and intelligent mode, it simplifies the process of measuring AC/DC current, voltage, resistance, continuity, capacitance, diode, NCV, firewire, and temperature. This manual provides essential information for safe and effective operation of your device.

2. Informații de siguranță

Always adhere to safety precautions when operating electrical testing equipment. This device complies with safety standard IEC 61010-1, CAT IV 600V. Failure to follow these guidelines may result in electric shock, fire, or damage to the meter or the equipment under test.

• Nu utilizați aparatul de măsură dacă pare deteriorat sau dacă sondele de testare sunt deteriorate.
• Asigurați-vă că ați selectat funcția și intervalul corect înainte de a efectua măsurători.
• Nu depășiți valorile maxime de intrare pentru nicio funcție.
• Fiți extrem de precauți când lucrați cu voltagpeste 30V AC RMS, 42V peak sau 60V DC. Aceste voltajetagreprezintă un pericol de șoc.
• Always disconnect power to the circuit before measuring resistance, continuity, capacitance, or diode.
• Țineți degetele în spatele apărătorilor de degete de pe sondele de testare în timpul utilizării.
• Înlocuiți bateriile imediat ce apare indicatorul de baterie descărcată.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente și nedeteriorate la deschiderea ambalajului:

• KAIWEETS KC602 Clamp Metru
• 3 baterii AAA (preinstalate sau incluse separat)
• Cabluri de testare (unul roșu, unul negru)
• Termocuplu
• Manual de utilizare
• Husă de transport

Figure 3.1: KAIWEETS KC602 Clamp Meter with included test leads, batteries, thermocouple, and carrying case.

4. Caracteristicile produsului

• Upgraded Intelligent Mode: Identifică automat volumul AC/DCtage/current, resistance, and continuity measurement signals for convenient and safe operation.
• Advanced Design & Multi-function: Includes MAX/MIN, data hold, flashlight, and auto-off features. D-shaped jaws are designed to hold test leads and enhance portability. Measures AC/DC current/voltage, resistance, continuity, capacitance, diode, NCV, firewire, and temperature.
• Large HD Color Screen: Provides clear readability, even in dark environments, and reduces difficulty reading under direct sunlight.
• Self-test & Inrush Measurement Function: Performs an automatic self-test ("CAL" display) upon power-on to ensure measurement accuracy. Inrush current measurement (5-600A) is available in AC current mode to help diagnose startup problems.
• Conformitatea siguranței: Meets IEC 61010-1, CAT IV 600V safety standards.

Figura 4.1: Pesteview of the multi-functional capabilities of the KC602 meter, showing various measurement icons.

Figure 4.2: The KC602's smart mode and high-definition color screen for improved readability.

5. Configurare

5.1 Instalarea bateriei

The KAIWEETS KC602 requires 3 AAA batteries (included). To install or replace batteries:

1. Asigurați-vă că aparatul de măsură este oprit.
2. Localizați capacul compartimentului bateriilor pe spatele contorului.
3. Folosiți o șurubelniță pentru a deschide compartimentul bateriei.
4. Insert the 3 AAA batteries, observing the correct polarity (+ and -).
5. Puneți la loc capacul compartimentului bateriei și fixați-l cu șurubul.

5.2 Conectarea cablurilor de testare

Pentru majoritatea măsurătorilor (vol.tage, resistance, continuity, capacitance, diode, temperature), the test leads are required.

1. Insert the red test lead into the "VΩmA" input jack.
2. Insert the black test lead into the "COM" input jack.
3. Ensure the connections are secure before proceeding with measurements.

6. Instrucțiuni de utilizare

Apăsați butonul de pornire (⏻) to turn on the meter. The meter will perform a self-test and display "CAL" before entering Smart Mode.

6.1 Smart Mode (Auto-recognition)

In Smart Mode, the meter automatically identifies the type of measurement (AC/DC voltage/current, resistance, continuity) and selects the appropriate range. This simplifies operation for common tasks.

Figure 6.1: The meter operating in Smart Mode, automatically detecting the measurement type.

6.2 Selectarea funcțiilor (mod manual)

Apăsați tasta ANGAJAT button to cycle through different measurement functions (e.g., Voltage, Resistance, Capacitance, Diode, Temperature, NCV, Inrush Current). The selected function will be indicated on the display.

6.3 AC/DC Voltage Test

1. Connect the red test lead to the "VΩmA" jack and the black test lead to the "COM" jack.
2. Selectați volumultage measurement function (V~ for AC, V- for DC) using the ANGAJAT button if not in Smart Mode.
3. Aplicați sondele de testare pe circuitul sau componenta care urmează a fi măsurată.
4. Citiți voltage valoarea pe display.

Figure 6.2: Performing an AC/DC voltage test using the test leads.

6.4 AC/DC Current Test (Clamp Measurement)

For current measurement, use the clamp fălci. Do not use test leads for current measurement with the clamp.

1. Select the current measurement function (A~ for AC, A- for DC) using the ANGAJAT button if not in Smart Mode.
2. Deschide clamp jaws and enclose only one conductor (wire) of the circuit. Ensure the jaws are fully closed.
3. Citiți valoarea curentă de pe afișaj.

Figure 6.3: Measuring AC/DC current by clampîn jurul unui singur conductor.

6.5 Inrush Current Test

The inrush current function measures the initial surge of current when a device is powered on. This function is only available in AC current mode and has a measurement range of 5-600A.

1. Select the AC current function.
2. Apăsați tasta INRUSH button (if available, or cycle through FUNC until Inrush is selected).
3. Deschide clamp jaws and enclose the conductor.
4. Power on the device to measure the inrush current.

Figure 6.4: Measuring the inrush current of an electrical component.

6.6 fără contact voltagTestul e (NCV)

The NCV function detects the presence of AC voltage without physical contact with the conductor.

1. Select the NCV function using the ANGAJAT buton.
2. Place the top of the meter (where the NCV sensor is located) near the conductor or outlet.
3. The meter will indicate the presence of voltage through audible beeps and visual indicators on the display.

Figure 6.5: Using the NCV function to detect voltage fără contact direct.

6.7 Resistance, Continuity, Capacitance, Diode Test

For these functions, ensure the circuit is de-energized before connecting the test leads.

• Rezistență (Ω): Connect test leads across the component.
• Continuitate (🔊): Connect test leads across the circuit. A continuous beep indicates continuity.
• Capacitate (⊥): Connect test leads across the capacitor (ensure it's discharged).
• Dioda (▶|): Connect test leads across the diode.

6.8 Măsurarea temperaturii

Use the included thermocouple for temperature measurements.

1. Connect the thermocouple to the appropriate input jacks (usually VΩmA and COM, check meter markings).
2. Select the temperature function (°C/°F) using the ANGAJAT buton.
3. Place the thermocouple tip on the object or in the environment to be measured.
4. Citiți temperatura pe afișaj.

6.9 funcții suplimentare

• MAX / MIN: Apăsați tasta MAX/MIN button to record the maximum and minimum readings during a measurement session.
• Păstrarea datelor: Apăsați tasta ȚINE Apăsați butonul pentru a îngheța citirea curentă pe afișaj. Apăsați din nou pentru a o elibera.
• Lanternă: The meter includes a built-in flashlight for illuminating dimly lit work areas. Activate it via a dedicated button or a long press of a function button (refer to meter markings).
• Oprire automată: The meter automatically powers off after approximately 15 minutes of inactivity to conserve battery life. This feature can typically be disabled by holding a specific button during power-on (refer to meter markings for details).

Figure 6.6: The KC602's bright display and integrated flashlight for use in low-light conditions.

7. Întreținere

• curatenie: Ștergeți contorul casing cu anunțamp cârpă și detergent blând. Nu folosiți abrazivi sau solvenți.
• Înlocuire baterie: Înlocuiți bateriile când pe afișaj apare indicatorul de baterie descărcată. Consultați Secțiunea 5.1 pentru instrucțiuni.
• Depozitare: Dacă aparatul de măsură nu este utilizat pentru o perioadă lungă de timp, scoateți bateriile pentru a preveni scurgerile. Depozitați aparatul de măsură într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• Cablii de testare: Inspect test leads for any damage (cuts, cracks) before each use. Replace if damaged.

8. Depanare

9. Specificații

10. Garanție și asistență

KAIWEETS offers a 3-year after-sales service and lifetime technical assistance for the KC602 Smart Digital Clamp Meter. For any questions, technical support, or warranty claims, please contact KAIWEETS customer service through their official channels or the retailer where the product was purchased.

For more information, visit the official KAIWEETS Store: KAIWEETS Store on Amazon