1. Produs terminatview
The Lectron Level 2 EV Charger is designed for efficient and reliable charging of J1772 compatible electric vehicles. This portable charger delivers up to 240V and 40 Amps of input power, providing a 9.6 kW charging rate for fast charging at home or on the go. It features a NEMA 14-50 plug for direct connection to a 240V outlet and a 16-foot cable for flexible placement.
- Încărcare rapidă: Up to 240V, 40 Amps, and 9.6 kW charging rate.
- Certificat de siguranță: ETL, FCC, and Energy Star certified with overvoltage, protecție la supracurent și scurtcircuit.
- Design durabil: Clasificare IP65 pentru rezistență la praf și apă.
- Portabil: Long 16-foot cable for convenient use in various locations.
- Universal Compatibilitate: Compatible with all J1772 standard EVs.
- Indicatoare LED: For monitoring charging status and fault alerts.
2. Informații de siguranță
Please read all safety instructions carefully before using the Lectron Level 2 EV Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Asigurați-vă că priza NEMA 14-50 este instalată și împământată corect de către un electrician calificat.
- Nu utilizați încărcătorul dacă cablul sau conectorul este deteriorat.
- Nu scufundați încărcătorul în apă sau alte lichide.
- Țineți copiii și animalele de companie departe de zona de încărcare.
- Avoid using extension cords with the charger.
- Operate the charger within its specified temperature range (-22°F to 122°F).
The Lectron Level 2 EV Charger is certified for safety and efficiency:
- ETL Certified (UL2594 standard): Asigură conformitatea cu standardele de siguranță nord-americane.
- Certificat FCC: Confirms electromagnetic compatibility.
- Certificat Energy Star: Indicates energy efficiency.
- Evaluat IP65: Provides protection against dust ingress and low-pressure water jets.
3. Instrucțiuni de configurare
Setting up your Lectron Level 2 EV Charger is straightforward. Follow these steps for proper installation and initial use:
- Alegeți o locație: Select a dry, well-ventilated area near a NEMA 14-50 outlet. Ensure the 16-foot cable can comfortably reach your vehicle's charging port without tension.
- Montare (Opțional): The charger comes with a mounting bracket. Securely attach the bracket to a wall stud or suitable surface using appropriate hardware (not included). Hang the charger control unit on the mounted bracket.
- Conectare la alimentare: Insert the NEMA 14-50 plug firmly into a dedicated 240V NEMA 14-50 outlet. The charger's "Power" LED indicator should illuminate, typically red, indicating it is receiving power.
- Verificare inițială: Observe the LED indicator lights on the control unit. Refer to the "Operating Instructions" section for the meaning of each light.
4. Instrucțiuni de utilizare
Once the charger is set up and connected to power, follow these steps to charge your electric vehicle:
- Pregătiți-vă vehiculul: Ensure your vehicle is turned off and the charging port is accessible.
- Conectați-vă la vehicul: Grasp the J1772 connector firmly and insert it into your vehicle's charging port. You should hear a click, indicating a secure connection.
- Monitorizați starea încărcării: The LED indicator lights on the charger control unit will change to reflect the charging status.
- Roșu (putere): Indicates the charger is powered on.
- Green (Connect): Illuminates when the charger is successfully connected to the vehicle.
- Blue (Charging): Blinks or stays solid blue when active charging is in progress.
- Yellow (Fault): Indicates an error or fault condition. Refer to the Troubleshooting section.
- Încărcare finalizată: Once your vehicle's battery is fully charged, the charger will automatically stop charging. The "Charging" LED may turn off or change color depending on the vehicle's communication.
- Deconecta: Press the release button on the J1772 connector and carefully pull it out from your vehicle's charging port. Disconnect the NEMA 14-50 plug from the wall outlet if you intend to store the charger.
5. Întreținere
Proper maintenance ensures the longevity and optimal performance of your Lectron Level 2 EV Charger.
Curatenie
- Always disconnect the charger from the power outlet before cleaning.
- Wipe the exterior of the charger and cables with a soft, damp pânză.
- Nu utilizați produse de curățare abrazive, solvenți sau substanțe chimice dure.
- Ensure all components are dry before reconnecting to power.
Depozitare
- When not in use, store the charger in a dry, clean, and cool place.
- Coil the cable neatly to prevent kinks or damage.
- Utilize the provided carrying case for protection during transport or storage.
6. Depanare
If you encounter issues with your Lectron Level 2 EV Charger, refer to the table below for common problems and solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| No Power (Red LED off) | Charger not plugged in, outlet issue, or power outage. | Ensure the NEMA 14-50 plug is fully inserted. Check the circuit breaker for the outlet. Verify power to the outlet with another device. |
| Charger connected but not charging (Blue LED off/not blinking) | Vehicle not ready to charge, J1772 connector not fully inserted, or vehicle communication error. | Ensure the vehicle is ready to accept charge. Re-insert the J1772 connector firmly. Check vehicle's dashboard for charging status or errors. |
| Yellow Fault LED is on | Internal fault, overcurrent, overvoltage, or short circuit detected. | Disconnect the charger from both the vehicle and the power outlet. Wait 5 minutes, then reconnect. If the fault persists, contact customer support. |
| Încărcare lentă | Vehicle settings, or external factors affecting power delivery. | Check your vehicle's charging settings. Ensure no other high-power appliances are on the same circuit. |
If the problem persists after attempting these solutions, please contact Lectron customer support for further assistance.
7. Specificații
Detailed technical specifications for the Lectron Level 2 EV Charger:
| Caietul de sarcini | Valoare |
|---|---|
| Numărul de model | LCHG-14-50-40A-BLK-US |
| Curent nominal | 40 Amps |
| Vol. intrare/ieșire nominalătage | 240 volți |
| Rata de încărcare | Până la 9.6 kW |
| Tip conector | J1772 |
| Tip priză | NEMA 14-50 |
| Lungimea cablului | 16 picioare |
| Evaluare rezistentă la intemperii | IP65 |
| Temperatura de operare | -22°F până la 122°F (-30°C până la 50°C) |
| Greutatea articolului | 14.57 lire sterline |
| Certificari | ETL, FCC, Energy Star |
8. Compatibilitate
The Lectron Level 2 EV Charger is designed to be universally compatible with all electric vehicles and plug-in hybrid vehicles that utilize the J1772 charging standard.
This includes, but is not limited to, vehicles from manufacturers such as:
- Mercedes
- BMW
- Vad
- Honda
- Hyundai
- Kia
- Porsche
- Nissan
- Chevy
- Rivian
- Volkswagen
9. Garanție și asistență
Lectron products are manufactured with high-quality materials and undergo rigorous testing. This product is covered by a manufacturer's warranty against defects in materials and workmanship.
For warranty claims, technical support, or any inquiries regarding your Lectron Level 2 EV Charger, please visit the official Lectron website-ul lor web sau contactați departamentul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției în scopuri de garanție.
Pentru mai multe informații, puteți vizita Lectron Store on Amazon.
