1. Introducere
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Axis Communications D8208-R Industrial 8-Port Managed PoE++ Switch. This device is designed for robust industrial environments, offering reliable network connectivity and Power over Ethernet (PoE++) capabilities for connected devices. Please read this manual thoroughly before using the product to ensure proper and safe operation.
2. Informații de siguranță
Respectați următoarele măsuri de siguranță pentru a preveni deteriorarea produsului și a asigura siguranța utilizatorului:
- Sursa de alimentare: Use only the specified power supply for this device. Ensure the power source meets the voltage și cerințele actuale.
- Mediu: Install the switch in an environment that complies with its operating temperature and humidity specifications. Avoid exposure to direct sunlight, excessive heat, moisture, or corrosive substances.
- Ventilare: Asigurați o ventilație adecvată în jurul dispozitivului pentru a preveni supraîncălzirea. Nu blocați orificiile de ventilație.
- Instalare: Instalarea trebuie efectuată de către personal calificat, în conformitate cu codurile și reglementările electrice locale.
- Întreţinere: Do not attempt to open or service the device yourself. Refer all servicing to qualified service personnel.
- Cabluri: Use appropriate and certified cables for all connections.
3. Conținutul pachetului
Verify that all items are present in the package. If any item is missing or damaged, contact your supplier.
- AXIS D8208-R Industrial 8-Port Managed PoE++ Switch
- Ghid de instalare rapidă
- Mounting Kit (e.g., DIN rail clip, screws)
- Terminal Block Connectors (for power input)
4. Produs terminatview
The AXIS D8208-R is a robust industrial switch designed for demanding applications. It features multiple Ethernet ports with Power over Ethernet capabilities and advanced management features.
4.1 Aspectul panoului frontal
Figura 1: Faţă view of the AXIS D8208-R Industrial Switch. This image displays the front panel of the switch, highlighting the various Ethernet ports, power input terminals, LED indicators, and the console port. Ports 1-4 are 1G PoE++ ports, ports 5-8 include 1G and 2.5G PoE++ capabilities, and ports 9-10 are 10G SFP+ ports.
Figura 2: Față detaliată view of the AXIS D8208-R Industrial Switch. This image provides a closer look at the port configuration and LED indicators. It shows the two 10G SFP+ uplink ports (9 and 10) at the bottom, the console port, and the reset button. The power input terminals are visible on the right side.
4.2 Components Description
- Porturi Ethernet (1-4): 1 Gigabit Ethernet ports with PoE++ (802.3bt) support.
- Porturi Ethernet (5-8): 1 Gigabit and 2.5 Gigabit Ethernet ports with PoE++ (802.3bt) support.
- 10G Ports (9-10): 10 Gigabit SFP+ uplink ports for high-speed connections.
- Power Input (P1, P2): Redundant power input terminals for enhanced reliability.
- Port de consolă: RJ45 port for local management and configuration via a serial connection.
- Buton de resetare: Used to reset the device to factory defaults or reboot.
- Indicatoare LED:
- SYS: Indicator de stare a sistemului.
- P1, P2: Power input status indicators.
- ALM: Indicator de alarma.
- RM, RC: Redundancy Management / Redundancy Control indicators.
5. Configurare
5.1 Montare
The AXIS D8208-R is designed for DIN rail mounting.
- Attach the DIN rail clip (if not pre-installed) to the rear of the switch using the provided screws.
- Hook the top edge of the DIN rail clip onto the DIN rail.
- Push the bottom of the switch firmly towards the DIN rail until it clicks into place.
- Ensure the switch is securely fastened to the DIN rail.
5.2 Conexiune la alimentare
The switch supports redundant power inputs (P1 and P2) for increased reliability.
- Ensure the power source is turned off before making any connections.
- Connect the positive (+) and negative (-) wires from your DC power supply to the corresponding terminals on the provided terminal block connector for P1.
- Insert the terminal block connector into the P1 power input port on the switch.
- (Optional) For redundant power, repeat steps 2 and 3 for the P2 power input.
- Once all connections are secure, turn on the power supply. The P1 and/or P2 LEDs should illuminate.
5.3 Conexiune de rețea
Connect network devices and uplink connections.
- Standard Devices: Connect your network devices (e.g., IP cameras, access points) to ports 1-8 using standard Ethernet cables. These ports will provide PoE++ power if the connected device supports it.
- Uplink: For high-speed uplink to your core network, insert compatible SFP+ transceivers into ports 9 and 10, then connect fiber optic cables.
5.4 Configurare inițială
The switch can be configured via a web-based interface or a command-line interface (CLI) through the console port.
- Web Interfata: Connect a computer to any Ethernet port on the switch. The switch will typically obtain an IP address via DHCP or use a default static IP. Refer to the Quick Installation Guide for the default IP address and login credentials.
- Port de consolă: Connect a serial cable from your computer to the console port on the switch. Use a terminal emulation program (e.g., PuTTY) with the specified serial settings (e.g., 115200 baud, 8 data bits, no parity, 1 stop bit, no flow control) to access the CLI.
6. Operare
6.1 Indicatori LED
Monitor the LED indicators for the operational status of the switch.
| LED | Stare | Descriere |
|---|---|---|
| SYS | Verde (solid) | Sistemul funcționează normal. |
| SYS | Verde (intermitent) | System is booting or performing an operation. |
| P1 / P2 | Verde (solid) | Corresponding power input is active. |
| ALM | Red (Solid/Flashing) | An alarm condition exists (e.g., power failure, port error). Check system logs. |
| LED-uri de port | Verde (solid) | Legătura stabilită. |
| LED-uri de port | Verde (intermitent) | Activitatea datelor. |
6.2 Management și configurare
The AXIS D8208-R is a managed switch, offering a range of configuration options for network optimization and security.
- WebGUI bazat pe: Accesați comutatorul web interface via a standard web browser to configure VLANs, QoS, port settings, PoE management, security features, and more.
- CLI: For advanced users, the Command Line Interface provides granular control over all switch functions.
- SNMP: The switch supports SNMP for integration with network management systems.
7. Întreținere
7.1 Curățare
To maintain optimal performance, periodically clean the exterior of the switch.
- Asigurați-vă că alimentarea este deconectată înainte de curățare.
- Folosiți o lavetă moale și uscată pentru a șterge suprafețele exterioare.
- Nu utilizați agenți de curățare lichizi sau cu aerosoli, deoarece aceștia pot deteriora dispozitivul.
- Păstrați orificiile de ventilație libere de praf și resturi.
7.2 de actualizări de firmware
Verificați periodic sistemul de comunicații Axis website for the latest firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements.
- Descărcați firmware-ul corespunzător file from the official Axis Communications support page for your model.
- Follow the instructions provided with the firmware update package for the correct update procedure, typically performed via the web interfata.
8. Depanare
If you encounter issues with your AXIS D8208-R switch, refer to the following common troubleshooting steps.
- Fără putere:
- Check power cable connections to the switch and the power source.
- Verify the power supply is functioning correctly and providing the correct voltage.
- Ensure the P1/P2 LEDs are illuminated.
- Fără conectivitate la rețea:
- Check Ethernet cable connections for both the switch and the connected device.
- Verify the link/activity LEDs on the respective port are active.
- Ensure the connected device is powered on and configured correctly.
- Check switch configuration (VLANs, port status) via the web interfață sau CLI.
- Dispozitivul PoE nu pornește:
- Ensure the connected device is PoE compatible and within the switch's PoE budget.
- Check the PoE status for the port in the switch's management interface.
- Verify the Ethernet cable is a standard Cat5e/6 or higher.
- Accesarea Web Interface Fails:
- Confirm your computer's IP address is in the same subnet as the switch, or that DHCP is functioning.
- Try accessing the switch via the console port to verify its IP configuration.
- Ștergeți memoria cache a browserului sau încercați un alt browser.
- Resetare din fabrică: If issues persist and you need to restore default settings, press and hold the reset button for approximately 10-15 seconds until the SYS LED changes behavior, then release. Warning: This will erase all custom configurations.
9. Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Axis Communications |
| Numărul de model | 02621-001 |
| Numele produsului | AXIS D8208-R Industrial 8-Port Managed PoE++ Switch |
| Porturi | 8 x PoE++ Ethernet (1G/2.5G), 2 x 10G SFP+ |
| Intrare de putere | Redundant DC power input (terminal blocks) |
| Greutatea articolului | 3.37 livre (aprox. 1.53 kg) |
| Dimensiuni pachet | 1.97 x 0.79 x 0.79 inci (aprox. 5 x 2 x 2 cm) |
| Producător | AXIS - ACCESS CONTROL |
| Data primului disponibil | 29 mai 2024 |
10. Garanție și asistență
For detailed warranty information, technical support, and additional resources, please visit the official Axis Communications website-ul.
Website: www.axis.com
Contact Axis Communications support for assistance with product installation, configuration, or troubleshooting beyond the scope of this manual.
