Introducere
This manual provides detailed instructions for the assembly, operation, and maintenance of your YOUTASTE Bar Stools. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.
Image: YOUTASTE Bar Stools in a kitchen environment.
Informații de siguranță
- Greutate maximă Recomandare: This product has a maximum weight recommendation of 300 pounds. Do not exceed this limit.
- Gas Cap Removal: It is critical to remove the plastic gas cap from the gas lift cylinder before assembly. Failure to do so will prevent proper height adjustment.
- Asamblarea corectă: Ensure all components are correctly assembled and all screws are tightened securely. Improper assembly may result in injury or damage to the product.
- Protecția podelei: The base features a non-slip rubber ring for floor protection and quiet use. Avoid dragging the stools to prevent damage to flooring.
- Stabilitate: Always ensure the stool is on a flat, stable surface before use.
Conținutul pachetului
Înainte de a începe asamblarea, verificați dacă toate piesele sunt prezente și nedeteriorate. Dacă lipsesc sau sunt deteriorate piese, vă rugăm să contactați serviciul de asistență pentru clienți.
- Scaun (2)
- Placă de bază (2)
- Cilindru de ridicare cu gaz (2)
- Suport pentru picioare (2)
- Placă de montare (2)
- Screws and Allen Wrench (for assembly)
- Manual de instrucțiuni (1)
Image: Components and quality features of the YOUTASTE Bar Stools.
Instructiuni de asamblare
Assembly is quick and typically takes 5-10 minutes per stool. Follow these steps:
- Prepare the Gas Lift Cylinder: Locate the plastic gas cap on the top of the gas lift cylinder. Remove this cap before proceeding. This is crucial for the height adjustment mechanism to function.
- Attach Footrest to Seat: Turn the seat upside down. Align the footrest with the pre-drilled holes on the underside of the seat. Secure it using the provided screws and Allen wrench. Ensure the longer screws are used for the front attachment points and shorter ones for the rear.
- Introduceți mecanismul de ridicare cu gaz în bază: Place the large circular base plate on the floor. Insert the prepared gas lift cylinder into the central hole of the base plate.
- Atașați scaunul la elevatorul cu gaz: Carefully place the assembled seat (with footrest attached) onto the top of the gas lift cylinder. Apply gentle downward pressure to secure it.
- Verificați stabilitatea: Once assembled, test the stability of the stool. Ensure all connections are firm and the stool does not wobble.
Image: Gas cap removal from the gas lift cylinder.
Video: Assembly and feature overview of YOUTASTE Bar Stools.
Instrucțiuni de operare
- Reglarea înălțimii: To adjust the seat height, locate the lever positioned under the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up and pull the lever upwards; the seat will automatically extend. Release the lever at the desired height.
- Rotire la 360°: The seat is designed to swivel 360 degrees, allowing for easy rotation and interaction without moving the base of the stool.
Video: Demonstration of adjustable height and swivel features.
Întreţinere
- curatenie: Ștergeți tapițeria din piele ecologică cu reclameamp cloth. For tougher stains, use a mild soap solution and then wipe clean with a damp Evitați substanțele chimice dure sau produsele de curățare abrazive.
- Părți metalice: Clean metal components with a soft, dry cloth. Avoid using abrasive materials that could scratch the finish.
- Verificări regulate: Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse. Strângeți-le din nou dacă este necesar.
Depanare
- Scaunul nu se ajustează pe înălțime: Ensure the plastic gas cap has been completely removed from the gas lift cylinder. If the cap is removed and the issue persists, check for any obstructions or contact support.
- Scaunele tremurânde: Check that all screws are securely tightened. Ensure the stool is placed on a flat, even surface.
- Difficulty Swiveling: Ensure no debris is obstructing the swivel mechanism. If the issue persists, contact support.
Specificații
Image: Detailed dimensions of the YOUTASTE Bar Stool.
| Caracteristică | Detaliu |
|---|---|
| Dimensiunile produsului | 16.92" D x 19.29" L x 36" H |
| Culoare | Bej |
| Marca | TU GUȘTI |
| Dimensiune | Set de 2 |
| Stil | Modern |
| Finisaj Mobilier | Metal |
| Stilul piciorului | Drept |
| Greutate maximă recomandată | 300 lire sterline |
| Instrucțiuni de îngrijire a produsului | Ștergeți cu Damp Pânză |
| Asamblare necesară | Da |
| Număr de bucăți | 2 |
| Greutatea articolului | 32.3 lire sterline |
| Producător | Baolande Inc |
| Numărul de model al articolului | TU GUȘTI |
| Tip material scaun | Faux Leather+Foam |
Garanție și suport
YOUTASTE provides 24-month replacement support for bar stools. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage from misuse, improper assembly, modifications, or impact.
For questions, missing parts, or support, please contact Baolande Furniture, the manufacturer, via their official channels or the platform where the product was purchased.
Image: YOUTASTE After-Sales Service details.
