Introducere
The Cecotec Bamba FaceCare LightSonic is an advanced facial massager designed to enhance your skincare routine. It incorporates multiple technologies to provide deep cleansing, improve product absorption, and promote skin hydration and rejuvenation. This manual provides essential information for the safe and effective use of your device.
Informații de siguranță
- Citiți toate instrucțiunile înainte de a utiliza dispozitivul.
- Țineți aparatul departe de apă și umiditate.
- Do not use on broken, irritated, or infected skin. Consult a dermatologist if you have any skin conditions.
- A nu se lăsa la îndemâna copiilor.
- Nu dezasamblați și nu încercați să reparați singur dispozitivul. Contactați personalul de service autorizat.
- If you experience any discomfort or adverse reactions, discontinue use immediately and consult a medical professional.
- Folosiți doar cablul și adaptorul de încărcare furnizate.
Produs terminatview
The Bamba FaceCare LightSonic features a sleek design with intuitive controls and multiple functions to cater to various skincare needs.
Componente
- Main Device Body
- Treatment Head with Ring for Cotton Discs
- Ecran LCD
- Power/Mode Button (U/M)
- Level Button (L)
- Cablu de încărcare USB
- Cotton Discs (included)

Figura 1: Față view of the device, showing the treatment head, LCD screen, and control buttons.

Figura 2: lateral view of the device, highlighting its ergonomic profile.
Key Technologies and Modes
- 3 moduri:
- Curațare profundă: Utilizes ionic technology and heat to open pores and provide a thorough cleanse.
- Absorbţie: Enhances the penetration of skincare products into the skin.
- Hidratare: Focuses on moisturizing and nourishing the skin.
- Tehnologia ionică: Delivers positive and negative ions for deeper cleansing and improved absorption of skincare products.
- EMS Electrostimulation Technology: Helps reduce wrinkles, tighten and lift muscles, and smooth the skin.
- Vibrație sonică: Aids in deeper penetration into the skin and internal tissue, promoting firming and toning.
- Terapie cu lumină:
- Lumină roșie: Increases cell vitality, accelerates blood circulation, stimulates cell metabolism, and promotes collagen regeneration for anti-aging effects, antioxidation, and repair.
- Lumină albastră: (Implied by "blue light" in feature bullets, though specific benefits not detailed in input, common for anti-acne/calming).
- Funcția de încălzire: Promotes the opening of facial pores for deep skin cleansing.
- 5 niveluri de intensitate: Adjustable EMS microcurrent intensity to suit all skin types.
- Ecran LCD: Displays selected settings for easy operation.
- 60 Minutes Autonomy: Oferă amptimpul de utilizare cu o singură încărcare.

Figure 3: The device illustrating its red and blue light therapy functions.
Înființat
Încărcare inițială
Before first use, fully charge the device. Connect the USB charging cable to the device's charging port and plug the other end into a compatible USB power source (e.g., computer, wall adapter). The LCD screen will indicate charging status. A full charge provides approximately 60 minutes of autonomy.
Attaching Cotton Discs (for Deep Cleaning Mode)
For deep cleansing, cotton discs can be attached to the treatment head.
- Place a cotton disc onto the treatment head.
- Secure the cotton disc by placing the retaining ring over it and twisting it into place.
- Apply your preferred cleansing solution to the cotton disc.

Figure 4: Illustration of how to attach a cotton disc to the device's head.
Instrucțiuni de operare
Follow these steps for effective use of your Bamba FaceCare LightSonic device:
- Pregătește-ți pielea: Cleanse your face thoroughly before using the device. Ensure your skin is free of makeup and impurities.
- Pornire: Press and hold the Power/Mode button (U/M) to turn on the device. The LCD screen will illuminate.
- Selectați modul: Press the Power/Mode button (U/M) repeatedly to cycle through the 3 available modes: Deep Cleaning, Absorption, and Hydration. The selected mode will be displayed on the LCD screen.
- Adjust Intensity (EMS): If using a mode that utilizes EMS technology, press the Level button (L) to adjust the intensity level from 1 to 5. Start with a lower intensity and gradually increase as comfortable.
- Aplicați pe față: Gently apply the device to your face, moving it slowly and evenly across the desired areas. Refer to the diagram below for recommended application areas and movements.
- Durata de utilizare: Use the device for the recommended time per area or per session, typically 5-10 minutes in total. Avoid prolonged use on a single spot.
- Oprire: After use, press and hold the Power/Mode button (U/M) to turn off the device.
Ghid de aplicare

Figure 5: Gentle application of the device to the cheek area.

Figure 6: Device in use, demonstrating the red light therapy for skin rejuvenation.

Figure 7: Device in use, demonstrating the blue light therapy for calming effects.

Figure 8: Device in use, showing the microcurrent stimulation for muscle toning.
Întreținere și îngrijire
Întreținerea corespunzătoare asigură longevitatea și performanța optimă a dispozitivului dumneavoastră.
- curatenie: După fiecare utilizare, opriți dispozitivul și ștergeți ușor capul de tratament cu o lavetă moale și drăguță.amp pânză. Nu folosiți produse de curățare abrazive și nu scufundați dispozitivul în apă.
- Depozitare: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective pouch when not in use.
- Îngrijirea bateriei: To maintain battery health, avoid fully discharging the device frequently. Charge it regularly, even if not used for extended periods.
Depanare
If you encounter any issues with your Bamba FaceCare LightSonic, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Dispozitivul nu pornește. | Baterie descărcată sau neîncărcată. | Charge the device fully. Ensure the charging cable is securely connected. |
| Modes or functions are not working. | Incorrect mode selection or device malfunction. | Ensure you have selected the correct mode. Try restarting the device. If the issue persists, contact customer support. |
| No sensation from EMS microcurrent. | Intensity level is too low or poor skin contact. | Increase the intensity level using the 'L' button. Ensure the treatment head is in full contact with your skin. Apply a conductive gel or serum for better results. |
| LCD screen is not displaying correctly. | Software glitch or damage. | Try turning the device off and on again. If the problem persists, contact customer support. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numele modelului | FaceCare LightSonic |
| Numărul de model al articolului | 04450 |
| Marca | Cecotec |
| Dimensiuni (L x l x H) | 16 x 5 x 4.5 cm |
| Greutate | 180 g |
| Sursa de alimentare | Baterie |
| Autonomie | 60 minute |
| Moduri | 3 (Deep Cleaning, Absorption, Hydration) |
| Niveluri de intensitate | 5 (for EMS microcurrents) |
| Tipul de piele | Toate tipurile de piele |
| Material | Plastic |
| Culoare | Alb |
Garanție și suport
For warranty information, technical support, or any inquiries regarding your Cecotec Bamba FaceCare LightSonic, please contact Cecotec customer service directly. Refer to the product packaging or the official Cecotec website pentru detalii de contact.
Puteți vizita și oficialul Magazinul Cecotec pe Amazon pentru mai multe informații despre produs și resurse de asistență.





