Manual de utilizare pentru mopul electric Cecotec FreeGo Wash 40W

1. Introducere

Thank you for choosing the Cecotec FreeGo Wash Electric Mop. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your device. Please read these instructions carefully before first use and keep them for future reference.

Instrucțiuni de siguranță

• Asigurați-vă că sursa de alimentare voltage corespunde cerințelor dispozitivului.
• Nu scufundați unitatea principală în apă sau alte lichide.
• Țineți dispozitivul departe de copii și animale de companie.
• Use only the original charger and accessories provided by Cecotec.
• Nu utilizați dispozitivul pentru curățarea lichidelor inflamabile sau combustibile.
• Deconectați întotdeauna dispozitivul înainte de curățare sau de a efectua întreținere.
• Avoid using foaming detergents, as they can damage the device.

2. Componentele produsului

Familiarize yourself with the parts of your Cecotec FreeGo Wash Electric Mop:

• Main Unit (Handle, Motor Housing, Battery)
• Jalisco Wet Roller
• Clean Water Tank (420 ml)
• Dirty Water Tank (150 ml)
• Self-Cleaning Base
• Adaptor de alimentare/Încărcător

Figure 2.1: The Cecotec FreeGo Wash Electric Mop, shown with its self-cleaning base and a close-up of the Jalisco wet roller, highlighting its design for efficient floor cleaning.

3. Configurare

3.1 Dezambalarea și asamblarea

1. Scoateți cu grijă toate componentele din ambalaj.
2. Atașați mânerul la unitatea principală până când se fixează în poziție cu un clic.
3. Ensure the Jalisco wet roller is correctly installed in the mop head.

3.2 Încărcare inițială

Before first use, fully charge the electric mop.

1. Place the mop on its self-cleaning base.
2. Connect the power adapter to the charging port on the base and then to a power outlet.
3. Indicatorul de încărcare se va aprinde. Așteptați aproximativ 3-4 ore pentru o încărcare completă.
4. A full charge provides up to 30 minutes of operating autonomy.

4. Instrucțiuni de utilizare

4.1 Umplerea rezervorului de apă curată

1. Scoateți rezervorul de apă curată din unitatea principală.
2. Open the tank cap and fill it with clean water. You may add a small amount of non-foaming floor cleaner suitable for electric mops. Do not use foaming detergents.
3. Close the cap securely and reinsert the tank into the mop until it clicks.

Figure 4.1: A user demonstrating the removal of one of the water tanks from the mop for refilling or emptying.

4.2 Starting the Mop and Cleaning Process

1. Press the power button to turn on the mop.
2. The Jalisco wet roller will begin to rotate, and the automatic spray function will dispense water onto the floor.
3. Guide the mop across the floor surface to clean. The 40W power and wet roller effectively tackle stubborn dirt.
4. The mop is designed for deep cleaning and can cover large areas thanks to its battery autonomy.

Figure 4.2: A user demonstrating the ease of use of the Cecotec FreeGo Wash Electric Mop while cleaning a floor.

Figura 4.3: O descriere detaliată view of the mop's Jalisco wet roller in action, effectively cleaning a liquid spill on a hard floor surface.

4.3 Parking Position

The mop features a convenient parking position, allowing it to stand upright independently when you need to pause during cleaning.

Figure 4.4: The electric mop shown in its convenient self-standing parking position, allowing for temporary pauses during cleaning.

5. Întreținere

5.1 Golirea rezervorului de apă murdară

The mop has an auto-stop function that activates when the dirty water tank is full. Empty the tank regularly to ensure optimal performance.

1. Turn off the mop and remove the dirty water tank.
2. Deschideți rezervorul și aruncați apa murdară.
3. Rinse the tank with clean water and dry it thoroughly.
4. Reinsert the tank into the mop.

5.2 Funcția de autocurățare

Utilize the self-cleaning base for convenient roller maintenance.

1. After cleaning, place the mop on its self-cleaning base.
2. Asigurați-vă că există apă curată în rezervorul de apă curată.
3. Activate the self-cleaning function (refer to your device's specific button for this function). The mop will automatically clean the roller.

Figure 5.1: The electric mop positioned on its dedicated base, ready for the self-cleaning cycle.

5.3 Cleaning the Roller and Filter

For thorough cleaning, the roller can be removed and washed manually. The filter should also be cleaned regularly.

1. Turn off the mop and remove the roller from the mop head.
2. Rinse the roller under running water until clean. Allow it to air dry completely before reinstallation.
3. Remove the filter (cartridge type) and rinse it under water. Ensure it is completely dry before placing it back.

6. Depanare

If you encounter any issues with your Cecotec FreeGo Wash Electric Mop, please refer to the following common problems and solutions:

Dacă problema persistă după încercarea acestor soluții, vă rugăm să contactați serviciul de asistență pentru clienți Cecotec.

7. Specificații

8. Garanție și asistență

Your Cecotec FreeGo Wash Electric Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, spare parts, or any other inquiries, please visit the official Cecotec website or contact their customer service department. Contact information can typically be found on the product packaging or the Cecotec brand store.