AUTOPHIX 7360 Full Systems Diagnostic Scan Tool

1. Introducere

The AUTOPHIX 7360 is a professional full systems diagnostic scan tool designed specifically for Toyota, Lexus, and Scion vehicles manufactured after 1996. This device provides comprehensive diagnostic capabilities, allowing users to read and clear fault codes, view live data streams, and perform various special functions across all major vehicle systems. Its user-friendly interface and robust features make it an essential tool for vehicle maintenance and troubleshooting.

Image 1.1: The AUTOPHIX 7360 diagnostic scan tool, featuring its display screen, navigation buttons, and OBDII connector cable.

2. Configurare

2.1 Conținutul pachetului

Verificați dacă toate componentele sunt prezente în pachet:

• AUTOPHIX 7360 Diagnostic Scan Tool
• Cablu OBDII (integrat)
• Manual de utilizare (acest document)
• USB Cable (for updates, if applicable)

2.2 Conectarea la vehicul

1. Localizați conectorul de legătură de date (DLC) cu 16 pini al vehiculului. Acesta se găsește de obicei sub bordul de bord, pe partea șoferului.
2. Asigurați-vă că aprinderea vehiculului este în poziția OPRIT.
3. Firmly plug the AUTOPHIX 7360's OBDII cable into the vehicle's DLC.
4. Turn the vehicle's ignition to the ON position (engine off). The device will power on automatically.

3. Instrucțiuni de utilizare

3.1 Funcții OBDII de bază

The AUTOPHIX 7360 provides comprehensive OBDII diagnosis for all OBDII compliant vehicles (after 1996). Navigate to the 'OBDII' menu option on the device.

Image 3.1: Screen illustrating the full OBDII functions, including Read & Erase Error Codes, Data Stream, EVAP System, DTC Lookup, Vehicle Information, I/M Readiness, Turn Off MIL, and System Status.

• Read & Erase Error Codes: Retrieve Diagnostic Trouble Codes (DTCs) and clear them from the vehicle's ECU.
• Flux de date în direct: View real-time sensor data from the vehicle's various systems.
• I/M Readiness Test: Verificați disponibilitatea monitoarelor de emisii.
• Testul sistemului EVAP: Efectuați teste asupra sistemului de control al emisiilor prin evaporare.
• Informații despre vehicul: Display the vehicle's VIN, Calibration ID, and Calibration Verification Number.
• Căutare DTC: Oferă definiții pentru codurile de eroare generice și specifice producătorului.

3.2 Advanced Diagnostic Functions (Full Systems)

This tool can access and diagnose all major systems in Toyota, Lexus, and Scion vehicles. Select the 'For Toyota' menu option to begin a full system scan.

Image 3.2: Display showing the range of full system diagnostics, including Transmission, Air Conditioner, Front Radar Sensor, Immobilizer, Central Gateway, Tire Pressure Monitor, Engine System, SRS Airbag, Navigation System, TMPS System, Audio System, Cruise Control, Active Noise Control, Theft Deterrent, Power Source Control, Steering Pad Switch, Combination Master Switch, Road Sign Assist, and Clearance Warning.

Supported systems include, but are not limited to:

• Sistemul motorului
• Sistem de frânare antiblocare (ABS)
• Sistem suplimentar de siguranță (SRS/Airbag)
• Senzorul unghiului de virare (SAS)
• Sistem de management al bateriei (BMS)
• Frână de parcare electronică (EPB)
• Sistem de monitorizare a presiunii în anvelope (TPMS)
• Transmitere
• Aer conditionat
• Senzor radar frontal
• Imobilizator
• Sistem de navigație
• Sistem audio
• Cruise Control
• Hybrid Control (as shown in Image 3.3)
• Smart Key System (as shown in Image 3.3)

Imaginea 3.3: Examples of professional diagnostic functions, including Air Bleeding, Reset Memory, Initialization, Hybrid Control, Sliding Roof, Steering Angle Adjust, Smart Key, Electronic Parking Brake, Steering Angle Learning, AFS, Sound System, and Interior Monitoring.

3.3 Funcții de servicii speciale

The AUTOPHIX 7360 supports a wide array of special functions for maintenance and service resets. Navigate to the 'Special Functions' menu.

Imaginea 3.4: Pesteview of advanced full functions, including Service Reset, TMPS Reset, SAS Reset, Battery Registration, Throttle Learning, Airbag Reset, Oil Reset, DPF Reset, ABS Bleeding, EPB Reset, BMS Reset, SRS Reset, ETCS Reset, Injector Coding, DPF Regeneration, and CBS Reset.

• Resetare ulei: Resetați martorul luminos de service al uleiului după un schimb de ulei.
• Învățare accelerație: Relearn the throttle body position.
• Resetare EPB (frână electronică de parcare): Deactivate and reactivate the brake control system, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
• Resetare TPMS (Sistem de monitorizare a presiunii în anvelope): Reset tire pressure values after tire rotation or sensor replacement.
• Injector Quantity Adjustment: Adjust injector coding after replacement.
• DPF (Diesel Particulate Filter) Reset/Regeneration: Perform DPF regeneration and reset the DPF light.
• Înregistrarea bateriei: Register a new battery to the vehicle's Battery Management System (BMS).
• Resetare airbag: Clear airbag crash data.
• Steering Angle Sensor (SAS) Learning: Calibrați senzorul de unghi de direcție.
• Sângerare ABS: Perform brake bleeding procedures.
• Resetare BMS: Reset the Battery Management System.
• ETCS Reset: Electronic Throttle Control System reset.

3.4 Managementul bateriei

The device offers accurate battery health checks and a professional battery registration function.

Image 3.5: Visual guide for accurate battery check, showing voltage ranges for Too Low, Normal, Slightly Low, and Too High conditions before and after starting the car.

Verificare baterie: The tool can display the current battery status, indicating voltage levels before and after starting the vehicle to assess battery health.

Image 3.6: Step-by-step guide for battery registration, including scenarios for dead battery, replacing original battery, replacing with same capacity battery, choosing registration screen, entering 12 digits, and starting the engine.

Înregistrarea bateriei: When replacing a vehicle battery, it is crucial to register the new battery with the vehicle's ECU to ensure proper charging and battery life. The 7360 allows you to:

1. Store current battery and mileage readings for replacement records.
2. Delete stored measurement values (charge state, current, voltage, temperatura etc.).
3. Initialize the battery management system for the new battery.

4. Compatibility and Language Support

The AUTOPHIX 7360 is designed for broad compatibility with Toyota, Lexus, and Scion vehicles from 1996 onwards.

Image 4.1: Visual representation of broad compatibility for Lexus, Toyota, and Scion models, along with flags indicating 12 supported languages.

4.1 Compatibilitatea vehiculului

The tool supports a wide range of models within the Toyota, Lexus, and Scion families, including but not limited to:

• Lexus: CT, ES, GS, GX, HS, IS, LC, LFA, LM, LS, LX, NX, RC, RX, SC, UX.
• Toyota: Rav4, Camry, Corolla, 4Runner, Highlander, C-HR, Aqua, Alphard, Corolla Cross, Crown, FJ Cruiser, Avalon, Land Cruiser, Mirai, Prius, Sequoia, Sienna, Supra, Tacoma, Tundra, Venza, Yaris.
• Scion: FR-S, iA, iM, iQ, iQ EV, tC, xA, xB, xD.

4.2 Asistență lingvistică

The device supports 12 languages, allowing users from various regions to operate the tool comfortably:

• engleză
• german
• franceză
• italian
• spaniolă
• portugheză
• Lustrui
• rusă
• norvegian
• danez
• suedez
• Finnish (Suomalainen)

5. Întreținere

5.1 Curățare

Pentru a menține performanța și aspectul dispozitivului, curățați-l regulat cu o lavetă moale șiamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.

5.2 Depozitare

When not in use, store the AUTOPHIX 7360 in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

5.3 Actualizări de software

Periodically check the official AUTOPHIX website for software updates. Updates may include new vehicle models, bug fixes, and improved functionalities. Follow the instructions provided on the website for the update process, typically involving connecting the device to a computer via USB.

6. Depanare

If you encounter issues with your AUTOPHIX 7360, refer to the following common troubleshooting steps:

• Dispozitivul nu pornește: Ensure the OBDII cable is securely connected to the vehicle's DLC and the vehicle's ignition is in the ON position. Check the vehicle's battery voltage.
• Eroare de comunicare: Verify that the vehicle supports the OBDII protocol. Ensure the ignition is ON. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• Ecranul se blochează sau dispozitivul nu răspunde: Deconectați dispozitivul de la vehicul, așteptați câteva secunde, apoi reconectați-l. Dacă problema persistă, efectuați o actualizare software.
• Citiri sau funcții incorecte: Ensure the device software is up to date. Verify that the correct vehicle make/model is selected if prompted.

7. Specificații

8. Garanție și asistență

For warranty information and technical support, please refer to the official AUTOPHIX website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.