1. Introducere
This manual provides detailed instructions for the installation, maintenance, and troubleshooting of your APS F75196K 2.5mm Wire Mesh Grille Insert. This product is designed to fit specific Ford F-250 and F-350 models. Please read all instructions carefully before proceeding with installation.
Compatibilitatea produsului:
- Ford F-250 (2020-2022) King Ranch/Platinum
- Ford F-350 (2020-2022) King Ranch/Platinum
This grille insert is specifically designed for the main upper grille section of the compatible vehicles.
2. Informații de siguranță
Always prioritize safety during installation. Failure to follow safety precautions may result in injury or damage to your vehicle.
- Purtați echipament individual de protecție adecvat, inclusiv ochelari de protecție și mănuși.
- Asigurați-vă că vehiculul este parcat pe o suprafață plană, cu motorul oprit și frâna de mână acționată.
- Allow the engine to cool completely before working on the front of the vehicle.
- Dacă nu sunteți sigur de vreun pas, consultați un mecanic profesionist.
- Keep all small parts and tools away from children.
3. Conținutul pachetului
Verificați dacă toate componentele sunt prezente și nedeteriorate înainte de a începe instalarea.
- APS F75196K 2.5mm Wire Mesh Grille Insert (4 pieces for main upper grille)
- Mounting Hardware (bolts, nuts, washers as required)
- Manual de utilizare (acest document)
Note: The original equipment (OE) grille shell, vehicle logo, or emblem is not included with this product.
Image: Individual components of the APS F75196K grille insert, including the four mesh sections and associated mounting hardware.
4. Instrucțiuni de instalare
The APS F75196K grille insert is designed for a bolt-over/overlay installation. Drilling is not required, and the original equipment (OE) grille shell remains on the vehicle after installation.
Instrumente necesare (nu sunt incluse):
- Set chei cu soclu
- Set șurubelnițe
- Protective Eyewear and Gloves
Pașii de instalare:
- Pregătiți vehiculul: Park your Ford F-250 or F-350 on a flat, stable surface. Turn off the engine and engage the parking brake. Allow the engine and surrounding components to cool.
- Clean the Grille Area: Thoroughly clean the existing OE grille shell to ensure proper adhesion and a clean installation.
- Position the Grille Inserts: Carefully align each of the four mesh grille insert pieces with the corresponding sections of your vehicle's main upper grille. Ensure a snug fit.
- Secure the Inserts: Using the provided mounting hardware (bolts, nuts, washers), secure each grille insert piece to the OE grille shell. Tighten all fasteners evenly to prevent warping or misalignment. Do not overtighten.
- Inspecție finală: Once all pieces are securely installed, perform a final visual inspection to ensure proper fitment and that all hardware is tightened. Gently tug on the inserts to confirm they are firmly in place.
Image: Visual comparison showing a vehicle's front grille before and after the installation of a mesh grille insert, highlighting the aesthetic change.
Image: The APS F75196K 2.5mm wire mesh grille insert shown installed on the main upper grille of a compatible Ford F-Series truck.
5. Întreținere
To ensure the longevity and appearance of your APS grille insert, follow these maintenance guidelines:
- Curățare regulată: Clean the grille insert regularly with mild automotive soap and water. Use a soft cloth or sponge to avoid scratching the powder-coated finish.
- Evitați substanțele chimice dure: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and material.
- Inspectați elementele de fixare: Periodically check all mounting hardware to ensure it remains tight. Retighten if necessary.
- Îndepărtați resturile: Regularly remove any accumulated debris (leaves, insects, road grime) from the mesh to maintain airflow and appearance.
Image: A detailed close-up of the 2.5mm wire mesh pattern, illustrating the crimped woven style and glossy black powder-coated finish.
6. Depanare
If you encounter any issues with your APS grille insert, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Grille insert feels loose after installation. | Mounting hardware not sufficiently tightened. | Re-check and tighten all bolts and nuts evenly. Ensure proper alignment before tightening fully. |
| Difficulty aligning inserts. | Incorrect positioning or debris obstructing fit. | Ensure the correct insert piece is being used for each section. Clear any debris from the OE grille shell. |
| Zgârieturi sau deteriorarea finisajului. | Abrasive cleaning materials or impact. | Use only soft cloths and mild soap for cleaning. Avoid contact with sharp objects. Minor scratches may be touched up with appropriate black automotive paint. |
If the problem persists or is not listed here, please contact APS customer support.
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | F75196K |
| Material | Oțel inoxidabil premium |
| Tipul de plasă | 2.5 mm Wire Mesh (Crimped Woven Style Diamond) |
| Termina | Glossy Black Powder Coated |
| Tip de instalare | Bolt Over/Overlay (Drilling Not Required) |
| Tipul de service al vehiculului | Camion |
| Tip de potrivire auto | Potrivire specifică vehiculului |
| Greutatea articolului | 8.12 lire sterline |
| Dimensiuni pachet | 47 x 12 x 5 inci |
Image: A close-up of the back view of the grille insert, highlighting the mounting points and the construction of the 2.5mm wire mesh.
8. Garanție și asistență
Informații despre garanție:
APS provides a 5-year spare part availability duration for this product, ensuring support for replacement parts if needed within this period.
Asistență clienți:
For any questions, concerns, or assistance with installation or product issues, please contact APS customer service. Refer to your purchase documentation for specific contact details or visit the official APS website-ul.
We are committed to resolving any problems with professional and sincere service.
