1. Introducere
The VDIAGTOOL V200 Automotive Circuit Tester is a versatile diagnostic tool designed for electrical system testing in 12V-24V vehicles. It combines multiple functions to assist in identifying and troubleshooting electrical faults efficiently.
Figure 1: VDIAGTOOL V200 Automotive Circuit Tester and included accessories.
2. Ce se află în cutie
- Tester de sondă de circuit
- Extension Cable (20 ft)
- Adaptor brichetă
- Manual de utilizare
Figure 2: All components included in the VDIAGTOOL V200 kit.
3. Configurare
The V200 is powered by the vehicle's 12V-24V battery. Connect the red alligator clip to the positive (+) terminal and the black alligator clip to the negative (-) terminal of the vehicle battery. Alternatively, use the provided cigarette lighter adapter for power.
3.1 Alimentarea dispozitivului
- Conexiune baterie: Atașați cl roșuamp la borna pozitivă a bateriei și cl negruamp la borna negativă a bateriei.
- Conectarea brichetei: Insert the cigarette lighter adapter into the vehicle's 12V accessory socket.
Video 1: Demonstrates the unboxing and initial setup of the VDIAGTOOL V200, including connecting to a car battery.
4. Moduri de operare
The V200 supports four primary working modes, easily switchable with a single button press.
- DC Voltage Test: Detects the DC voltage value of the circuit under test with 0.1V resolution.
- AC Voltage Test: Detects Max/Min voltage, frequency, and duty cycle of the AC circuit.
- Test de rezistență: Measures resistance between the probe tip and the auxiliary ground lead.
- Test de diodă: Determines the operation and conductivity of diode assemblies.
Figure 3: The V200 display interface illustrating the four main working modes.
5. Funcții cheie
5.1 Polarity Identification
The V200 automatically identifies circuit polarity. A red LED indicates a positive connection, while a green LED indicates a negative connection. No LED indicates an open circuit.
Figure 4: Visual representation of polarity identification using the V200's LED indicators.
5.2 Activarea componentelor
This feature allows you to activate components (e.g., lights, motors, relays) by supplying power or ground directly from the probe, aiding in troubleshooting. Use caution to avoid damaging components by applying incorrect polarity or excessive current.
Figure 5: Illustration of component activation for testing a car bulb.
5.3 Continuity, Sensor/Signal Circuit Test
Perform continuity tests, check sensor states, and verify signal integrity within circuits. The tool can also help locate short circuits and bad grounds.
6. Caracteristici de siguranță
6.1 Protecție la suprasarcină
The V200 features a built-in 8-amp circuit breaker. In case of an overload, the device will automatically shut down to protect itself and the tested components. A beep warning will also occur.
Figure 6: Visual indicator of the overload protection feature.
7. Specificații
- Dimensiuni produs: 1.85 x 1.1 x 7 inci
- Greutatea articolului: 1.17 kilograme (2.58 livre)
- Sursa de alimentare: Corded Electric (12V-24V vehicle battery or cigarette lighter)
- Număr de model: VDT-V200-P
- Lungimea cablului: 20FT main cord + 20FT extension cord (Total 40FT)
- Caracteristici suplimentare: Built-in flashlight, Tone On/Off Design
8. Întreținere
To ensure the longevity and optimal performance of your VDIAGTOOL V200, follow these general maintenance guidelines:
- Keep the device clean and free from dust, dirt, and moisture.
- Store the tester and its accessories in the provided sturdy case when not in use.
- Inspect cables and connectors regularly for any signs of wear or damage. Replace if necessary.
- Evitați expunerea dispozitivului la temperaturi extreme sau la lumina directă a soarelui pentru perioade prelungite.
9. Depanare
If you encounter issues with your VDIAGTOOL V200, consider the following:
- Dispozitivul nu pornește: Ensure secure connections to the vehicle's battery or cigarette lighter. Verify the vehicle's power source is active.
- Fără citire/Citire incorectă: Check that the probe tip is making good contact with the circuit. Ensure the correct operating mode is selected.
- Protecție la suprasarcină declanșată: If the device shuts down with a beep, it indicates an overload. Disconnect the probe, allow a few moments, and then reconnect. Reduce the load or verify the circuit's specifications before retesting.
- Probleme legate de ecran: If the screen is blank or unresponsive, try disconnecting and reconnecting the power source.
10. Garanție și asistență
VDIAGTOOL offers comprehensive support for the V200 Automotive Circuit Tester:
- Garantie: Garanție de 3 ani.
- Asistență tehnică: Asistență tehnică pe viață.
- Returnări: 60 Days No-Reason-asked Return for refund.
- Înlocuirea sondei: Free probe replacement.
- Contactați asistența: For any questions or assistance, kindly reach us via vdiagtool2@outlook.com.
