Manual de utilizare FLIPSKY Controler electric dual de viteză FSESC6.7

1. Introducere

This manual provides essential information for the proper installation, operation, and maintenance of your FLIPSKY Dual Electric Speed Controller FSESC6.7. This controller is designed for electric skateboards, e-bikes, scooters, robots, and similar applications, offering precise motor control and robust protection features. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Caracteristicile produsului

• Moduri de control multiple: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
• Firmware avansat: Utilizes the latest firmware version, offering rich control interface and sensor support.
• Balancing Car Functionality: Supports balancing car applications by connecting an IMU module via the IIC interface. Compatible IMU modules include MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
• Robust Power Handling: Features a continuous current of 140A and an instantaneous current of 400A.
• Vol. Largtage Gama: Funcționează într-un volumtage range of 14V-60V (4-13S cells), safely supporting 4S to 12S battery configurations. Note: Voltage spikes must not exceed 60V.
• Design compact: Dimensions of 79.8mm x 66.8mm x 17.8mm make it suitable for various installations.

3. Specificații

Note: It is recommended to keep firmware 5.2 from factory shipment. New firmware upgrades may potentially damage the ESC.

4. Configurare și cablare

Proper wiring is crucial for the safe and effective operation of the FLIPSKY Dual Electric Speed Controller. Refer to the diagrams below for connection details.

Figura 4.1: Top view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, showing the main board, capacitors, and connected motor and power wires. This image provides a general overview of the component layout.

Figura 4.2: Fund view of the FLIPSKY Dual Electric Speed Controller FSESC6.7, illustrating the integrated aluminum anodized heat sink designed for efficient thermal management.

Figura 4.3: Physical dimensions of the FLIPSKY Dual Electric Speed Controller FSESC6.7, indicating a length of 79.8mm, a width of 66.8mm, and a height of 17.8mm. These measurements are important for installation planning.

4.1. Conexiune terminatăview

The controller features various ports for power, motor connections, and communication with external devices. Ensure all connections are secure and correctly oriented.

Figura 4.4: Comprehensive wiring diagram illustrating the connection points for the battery, two motors, and a receiver. Numbered labels correspond to specific ports on the ESC.

Figura 4.5: Detailed pinout diagram for the various communication and sensor ports on the FSESC6.7. This includes pin assignments for SWD (1, 6), COMM (2, 7), CAN (3, 8), USB (4, 9), and SENSE (5, 10) interfaces.

4.2. Puncte de conectare

• Conexiune baterie: Connect your battery pack (4-13S, 14V-60V) to the main power cables (14AWG with XT90 connector). Ensure correct polarity.
• Conexiuni motor: Connect the two motors to the designated motor wire outputs (12AWG).
• Conexiune la receptor: Connect your PPM receiver to the appropriate input port for control signals.
• Port USB: Use the USB port for configuration and firmware updates (if applicable).
• Autobuz CAN: For multi-ESC setups or communication with other CAN-enabled devices.
• UART, SPI, IIC: These ports support various sensors and communication protocols, including IMU modules for balancing applications.

5. Instrucțiuni de utilizare

The FLIPSKY FSESC6.7 offers flexible control options and is programmable to suit various motor types and application requirements.

5.1. Moduri de control

The controller supports four primary control modes:

• Control curent: Regulates the motor current.
• Dutycycle Control: Controls the motor speed based on the PWM duty cycle.
• Controlul vitezei: Maintains a desired motor RPM.
• Controlul poziției: Controls the motor to a specific angular position.

5.2. Firmware and Configuration

The ESC is programmable, allowing for customization of parameters. It is strongly recommended to maintain the factory-shipped firmware version 5.2. Upgrading to newer firmware versions carries a risk of damaging the ESC. Consult official FLIPSKY resources for any firmware-related guidance.

6. Întreținere

To ensure the longevity and reliable performance of your FLIPSKY Dual Electric Speed Controller, follow these general maintenance guidelines:

• Păstrați curat și uscat: Regularly inspect the ESC for dust, dirt, or moisture. Clean with a soft, dry brush or compressed air. Avoid exposure to water or high humidity.
• Inspectați conexiunile: Periodically check all wiring connections for looseness, corrosion, or damage. Secure any loose connections.
• Management termic: Ensure adequate airflow around the heat sink, especially during operation. Avoid obstructing the heat sink.
• Evitați daunele fizice: Protect the ESC from impacts or excessive vibrations.

7. Depanare

The FLIPSKY FSESC6.7 incorporates several protection functions to safeguard the unit and connected components. Understanding these can help in diagnosing issues.

7.1. Funcții de protecție

• Vol. Scăzuttage Protecție: Activates if the battery voltage drops below a safe threshold, preventing over-discharge.
• Înalt Voltage Protecție: Engages if the input voltage exceeds the maximum limit (60V), protecting against over-voltage.
• Protecție la supracurent: Limits current flow to prevent damage from excessive load.
• Temperature Abnormality Protection: Monitors internal temperature and reduces power or shuts down if temperatures become critical.
• MOSFETs Over-Temperature Protection: Specifically protects the MOSFETs from overheating.

7.2. Pași generali de depanare

• Fără putere: Check battery connections, battery charge level, and main power switch.
• Motorul nu răspunde: Verify motor connections, sensor connections (if applicable), and receiver signal. Check ESC configuration for correct motor type and control mode.
• Funcționare intermitentă: Inspect all wiring for loose connections or damage. Check for signs of overheating.
• Error Codes/LED Indicators: Refer to the FLIPSKY software documentation for specific error codes or LED blink patterns, if available.

8. Informații despre garanție

The FLIPSKY Dual Electric Speed Controller FSESC6.7 comes with a warranty period of 2 months or more. Please retain your proof of purchase for warranty claims. The warranty typically covers manufacturing defects but may not cover damage resulting from improper installation, misuse, unauthorized modifications, or firmware upgrades not explicitly recommended by the manufacturer.

9. Suport

For technical assistance, product inquiries, or warranty support, please contact FLIPSKY customer service. Our support team is available to help resolve any issues you may encounter with your product.

Informații de contact: Please refer to the official FLIPSKY website-ul sau documentația achiziției pentru cele mai recente date de contact.