1. Introducere
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Produs terminatview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Vedere de noapte: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Câmp larg de View: 120° wide-angle lens for comprehensive monitoring.
- Design durabil: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Mișcare activată: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Configurare
- Instalați bateriile: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Introduceți cardul SD: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Pornire: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Montarea camerei:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Instrucțiuni de utilizare
4.1. Selectarea modului
The camera has three main modes:
- OPRIT: Opriți camera.
- TEST: Vă permite să view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- PE: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Setare | Descriere | Valoare recomandată |
|---|---|---|
| Modul | Select Photo, Video, or Photo+Video. | Foto + Video |
| Rezoluție foto | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32MP |
| Rezoluție video | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| Sensibilitate PIR | Adjust motion sensor sensitivity (High, Medium, Low). | Mediu |
| Interval de declanșare | Time delay between detections (e.g., 5s, 10s, 30s). | 10 secunde |
| Time Lapse | Capture images at set intervals regardless of motion. | Oprit |
| Data și ora | Setați data și ora curente. | Actual |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Figura 4.6: Example of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Întreținere
- curatenie: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Înlocuire baterie: Înlocuiți toate bateriile în același timp. Nu amestecați baterii vechi cu noi sau baterii de tipuri diferite.
- Managementul cardului SD: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Depozitare: Când nu este utilizată pentru perioade lungi de timp, scoateți bateriile și depozitați camera într-un loc răcoros și uscat.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Camera nu pornește | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Calitate slabă a imaginii/videoului | Dirty lens; low light conditions; incorrect resolution settings. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Camera not triggering | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Eroare card SD | Card SD plin; card SD incompatibil; card SD corupt. | Şterge files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Specificații
| Caracteristică | Detaliu |
|---|---|
| Rezoluție foto | Până la 32MP |
| Rezoluție video | Până la 4K |
| Viteză de declanșare | 0.1 secunde |
| Gama de vedere nocturnă | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| Interval de detectare PIR | Day: 80ft (24m), Night: 65ft (20m) |
| Câmpul de View | 120° Wide Lens |
| Evaluare rezistentă la apă | IP66 |
| Temperatura de operare | -22°F până la 158°F (-30°C până la 70°C) |
| Depozitare | SD Card (up to 256GB, Class 10 or higher) |
| Alimentare electrică | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Afişa | 2.4'' LCD |
8. Garanție și asistență
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri website-ul.
Vă rugăm să păstrați dovada achiziției pentru cererile de garanție.
