Manual de instrucțiuni pentru suportul de birou VIVO STAND-TS38C Premium pentru monitor dual ultra-wide

Introducere

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-TS38C Premium Dual Ultra-Wide Monitor Desk Mount. Please read all instructions carefully before installation and use to ensure proper setup and safe operation.

Informații de siguranță

WARNING: Do not install into drywall alone. This mount must be secured into wood stud, concrete, or brick walls only. Ensure your desk surface is stable and capable of supporting the combined weight of the mount and monitors.

Always ensure all screws and bolts are securely tightened before use. Regularly check the mount for any signs of wear or damage. Keep children and pets away from the installation area.

Produs terminatview

The VIVO STAND-TS38C is a heavy-duty dual monitor desk mount designed for ultra-wide LCD/LED screens ranging from 27 to 38 inches. It features adjustable telescoping arms for a flush wall setup and supports two screens with VESA patterns of 75x75mm or 100x100mm.

Figura 1: Per total view of the VIVO STAND-TS38C Dual Monitor Desk Mount components.

Configurare și instalare

Follow these steps for proper installation. For a visual guide, refer to the official VIVO assembly videos provided below.

Step 1: Attaching the Desk Clamp

The mount can be secured to your desk using either a heavy-duty C-clamp or an optional grommet mount. The maximum recommended desktop thickness is 3.25 inches.

Figure 2: Illustrates the C-clamp installation method, providing a damage-free setup.

Figura 3: Detaliu al suportului de birouamp, showing how it secures to the desktop.

Step 2: Assembling the Telescoping Arms

Attach the telescoping arms to the central pole. These arms are designed to adjust in length to fit your monitors and slide into each other for enhanced strength and stability.

Figure 4: The telescoping arms extend outwards, allowing for a flush-to-wall monitor setup.

Step 3: Attaching Monitors to VESA Brackets

Mount your monitors using the detachable VESA brackets. The mount supports VESA patterns of 75x75mm or 100x100mm. Ensure the monitor is securely fastened to the bracket.

Figura 5: Spate view of two monitors securely attached to the VESA brackets on the mount.

Pasul 4: Managementul cablurilor

Utilize the integrated cable clips along the arms and central pole to route and organize your monitor cables. This helps maintain a clean and clutter-free workspace.

Figure 6: Cables neatly routed through the integrated clips on the monitor arm.

Videoclipuri de instalare

For a step-by-step visual guide, please watch the official VIVO assembly videos:

Instrucțiuni de operare

The VIVO STAND-TS38C offers extensive adjustability to optimize your viewexperiență:

• Articulare: The adjustable mount offers +90° to -90° tilt, 180° swivel, and 360° rotation.
• Reglarea înălțimii: Monitors can be adjusted vertically along the central pole to your preferred height.
• Orientare: Monitors can be placed in either portrait or landscape orientation.
• Telescoping Arms: Adjust the length of the arms to achieve the desired monitor spacing and flush-to-wall setup.

Figure 7: Demonstrates the tilt, swivel, and rotation capabilities of the monitor mount.

Întreţinere

Pentru a asigura longevitatea și performanța optimă a suportului de monitor VIVO, urmați aceste instrucțiuni de întreținere:

• Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse.
• Curățați suportul cu o lavetă moale,amp Evitați utilizarea de produse de curățare abrazive sau solvenți.
• Do not exceed the maximum weight capacity of 22 lbs per screen.

Depanare

If you encounter any issues with your monitor mount, consider the following common solutions:

• Monitors not level: Ensure all VESA bracket screws are tightened evenly. Adjust the tilt mechanism as needed.
• Montura pare instabilă: Verificați de două ori dacă biroul este închis.amp or grommet mount is securely fastened to the desk. Verify that the desk itself is stable.
• Difficulty adjusting arms: Loosen the relevant adjustment screws slightly, reposition the arm, and then re-tighten.

Specificații

Garanție și suport

VIVO products typically come with a manufacturer's warranty. For specific warranty details and customer support, please refer to the documentation included with your product or visit the official VIVO website. You can also contact VIVO customer service for assistance with any product-related inquiries.