Dasqua XNUMX-XNUMX XNUMX-in-XNUMX Laser Tape Measure User Manual

1. Introducere

This manual provides comprehensive instructions for the safe and effective use of your Dasqua XNUMX-XNUMX XNUMX-in-XNUMX Laser Tape Measure. This device combines a traditional XNUMX-meter tape measure with a XNUMX-meter laser distance meter, featuring an OLED display for clear readings and USB charging capability. Please read this manual thoroughly before operating the device and retain it for future reference.

2. Informații de siguranță

AVERTIZARE: This product contains a Class XNUMX laser. Improper use can result in hazardous radiation exposure. Always adhere to the following safety guidelines:

• Nu priviți direct în raza laser.
• Nu îndreptați raza laser către oameni sau animale.
• Avoid pointing the laser beam at reflective surfaces, as reflected beams can also be hazardous.
• Do not disassemble or modify the device. Unauthorized modifications can lead to laser radiation exposure.
• Nu lăsați dispozitivul la îndemâna copiilor.
• Use only as described in this manual.
• Do not operate the device in explosive atmospheres or near flammable liquids or gases.

3. Produs terminatview

3.1 Componente și comenzi

Familiarize yourself with the main components and control buttons of your Dasqua XNUMX-in-XNUMX Laser Tape Measure.

Image: Diagram showing the Dasqua XNUMX-XNUMX device with labels for the OLED display, laser emission point, USB charging port, tape measure, lock button, and control buttons.

• Afișaj OLED: Shows measurements, battery status, and operating modes.
• Tape Measure: Traditional retractable steel tape for short-distance measurements (XNUMXm).
• Laser Emission Point: Where the laser beam exits the device.
• Port de încărcare USB: For recharging the internal battery.
• Lock Button: Secures the tape measure in position.

XNUMX Control Buttons

Imagine: Prim-plan view of the control panel on the Dasqua XNUMX-XNUMX, showing the FUNC/UNITS, +/-, DIST, and CLEAR/OFF buttons.

• FUNC/UNITS: Press to cycle through measurement functions (e.g., single, continuous) or to change measurement units (meters, feet, inches).
• +/-: Used for adding or subtracting measurements. Also used to set the measurement reference point (front or rear of the device).
• DIST: Activates the laser for measurement. Press once to turn on the laser, press again to take a measurement.
• CLEAR/OFF: Press once to clear the current measurement. Press and hold to power off the device.

4. Configurare

4.1 Încărcarea dispozitivului

The Dasqua XNUMX-XNUMX is equipped with a built-in Li-ion XNUMXV rechargeable battery. Before first use, ensure the device is fully charged.

Imagine: Laterală view of the Dasqua XNUMX-XNUMX showing the micro-USB charging port.

1. Localizați portul de încărcare USB de pe lateralul dispozitivului.
2. Connect the provided USB cable to the device and to a standard USB power adapter (not included) or a computer USB port.
3. The OLED display will indicate charging status.
4. Once fully charged, disconnect the USB cable.

A full charge provides approximately XNUMX measurements.

4.2 Pornire/Oprire

• Pentru a porni: Apăsați tasta DIST button or the CLEAR/OFF buton.
• Pentru a opri: Țineți apăsat butonul CLEAR/OFF button for a few seconds. The device will also automatically power off after XNUMX seconds of inactivity to conserve battery. The laser itself turns off after XNUMX seconds of inactivity.

5. Instrucțiuni de utilizare

XNUMX Using the Tape Measure

The integrated XNUMX-meter tape measure functions like a standard tape measure.

Imagine: Prim-plan view of the XNUMXcm wide tape measure extending from the Dasqua XNUMX-XNUMX device, showing metric markings.

1. Pull the tape blade out to the desired length.
2. To lock the tape in place, slide the lock button forward.
3. To retract the tape, slide the lock button backward and gently guide the tape back into the housing.

XNUMX Using the Laser Measure

The laser measure provides quick and accurate digital distance measurements up to XNUMX meters.

Image: The Dasqua XNUMX-XNUMX device with a visible red laser beam extending from its front, indicating active laser measurement.

Single Distance Measurement

1. Porniți dispozitivul.
2. Point the laser emission point towards the target.
3. Apăsați tasta DIST button once to activate the laser. A red laser dot will appear on the target.
4. Apăsați tasta DIST button again to take the measurement. The distance will be displayed on the OLED screen.

Continuous Measurement (Tracking)

1. Porniți dispozitivul.
2. Apăsați tasta FUNC/UNITS button until the continuous measurement icon (often a moving line or similar) appears on the display.
3. Apăsați tasta DIST button once to start continuous measurement. The display will update in real-time as you move the device.
4. Apăsați tasta DIST button again to stop continuous measurement and hold the last reading.

Changing Measurement Units

To switch between meters (m), feet (ft), and inches (in):

• Apăsați tasta FUNC/UNITS apăsați butonul în mod repetat până când este afișată unitatea dorită.

Setting Measurement Reference Point

The device can measure from its front edge or its rear edge. This is typically indicated by an icon on the display.

• Apăsați tasta +/- button to toggle between front-edge and rear-edge measurement reference.

Addition and Subtraction of Measurements

The device supports basic arithmetic operations for measurements.

1. Take the first measurement using the DIST buton.
2. Apăsați tasta +/- button once for addition (+) or twice for subtraction (-). The corresponding symbol will appear on the display.
3. Take the second measurement. The result of the operation will be displayed.
4. To clear the calculation, press CLEAR/OFF.

6. Întreținere

• curatenie: Folosiți un moale, damp cloth to clean the device. Do not use abrasive cleaners, solvents, or immerse the device in water.
• Depozitare: Depozitați dispozitivul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• Baterie: Recharge the battery regularly, even if the device is not in frequent use, to maintain battery health.
• Laser Lens: Keep the laser emission and reception lenses clean for accurate measurements. Use a soft cloth, similar to cleaning camera lenses.

7. Depanare

8. Specificații

Detailed technical specifications for the Dasqua XNUMX-XNUMX XNUMX-in-XNUMX Laser Tape Measure.

Image: Detailed diagram of the Dasqua XNUMX-XNUMX with a list of technical specifications including measurement range, accuracy, laser class, operating conditions, and battery life.

9. Garanție și asistență

Dasqua products are manufactured under strict quality control. This product is inspected and approved for sale by Dasqua quality control centers.

Image: The Dasqua XNUMX-XNUMX device alongside a "Warranty Letter" and an instruction manual, indicating product quality assurance.

Dasqua takes responsibility for the quality of the product, providing a XNUMX-year warranty against defects. Parts found to be defective may be repaired or replaced at Dasqua's sole discretion. This warranty does not apply to any product which has been subject to misuse, abuse, improper application, or which has been altered or repaired by unauthorized personnel.

For warranty claims or technical support, please contact your authorized Dasqua dealer or visit the official Dasqua website pentru informații de contact.