Introducere
The TOA SR-S4S is a high-performance, two-way line array speaker system designed for short-distance sound transmission. Its unique design allows for precise sound projection and consistent audio levels across various distances. This manual provides essential information for the proper setup, operation, and maintenance of your SR-S4S speaker system.
Informații de siguranță
Respectați întotdeauna următoarele măsuri de siguranță pentru a preveni vătămările corporale și deteriorarea echipamentului:
- Sursa de alimentare: Ensure the speaker is connected to a power source that matches its voltage cerințe.
- Ventilare: Nu blocați orificiile de ventilație. Asigurați o circulație adecvată a aerului în jurul unității pentru a preveni supraîncălzirea.
- Umiditate: Keep the speaker away from water or excessive moisture. This product is not waterproof.
- Montare: When mounting, ensure the structure can support the speaker's weight (approximately 16 kg / 42.8 pounds). Use appropriate mounting hardware and follow all local building codes.
- Service: Nu încercați să reparați singur acest produs. Consultați toate lucrările de service către personalul calificat de service.
Produs terminatview
The SR-S4S speaker system is engineered for optimal sound distribution, featuring a robust design and advanced acoustic components.
Imagine: față view of the TOA SR-S4S Short Throw 2-Way Line Array Speaker System. The speaker is a tall, slender, rectangular unit with a perforated metal grille covering the front face. The enclosure is light gray, and visible bolts secure the side panels. The TOA logo is subtly visible near the bottom of the grille.
Caracteristici cheie:
- Equipped with eight 10cm woofers for powerful low-frequency output.
- Features 24 small tweeters for clear high-frequency sound reproduction.
- Linear sound source effect minimizes energy attenuation over distance, enhancing long-distance sound projection.
- Suppressed vertical sound dispersion directs sound precisely to the target area.
- Maintains consistent sound pressure levels, preventing excessive loudness near the speaker.
- Allows for configuration of longer sound sources by joining 2 or 3 speakers, increasing projection distance and volume.
- Includes a built-in network circuit for single amplifier drive.
- Can be converted to a bi-amplifier drive system by modifying internal connections.
- Supports high-impedance applications with the optional MT-S0601 Matching Transformer.
Înființat
Follow these steps for the initial setup of your SR-S4S speaker system:
- Despachetarea: Scoateți cu grijă difuzorul din ambalaj. Verificați dacă există semne de deteriorare în timpul transportului.
- Plasare: Position the speaker in the desired location. Ensure it is on a stable, level surface or securely mounted according to professional installation guidelines. Consider the speaker's directivity angle (90° Horizontal / 10° Vertical) for optimal sound coverage.
- Conexiune: Conectați difuzorul la dvs amplifier using appropriate speaker cables. The SR-S4S features M5 screw terminals and Neutrik NL4MP x2 input connectors. Ensure correct polarity (+ to + and - to -).
- Opțional Bi-Amping: If using a bi-amplifier drive system, refer to the detailed wiring diagram in the advanced setup guide (not included in this manual) for internal connection changes.
- Optional Matching Transformer: For high-impedance applications, install the optional MT-S0601 Matching Transformer as per its instructions.
- Pornire: După ce toate conexiunile sunt securizate, porniți amplifier and audio source. Start with the volume at its lowest setting.
Funcționează
Operating the SR-S4S is straightforward once properly set up:
- Controlul volumului: Reglați nivelul volumului folosind amplifier's controls. Avoid setting the volume too high, which can cause distortion or damage to the speaker.
- Optimizarea sunetului: For optimal sound quality, consider using a digital processor like the DP-0206 (optional) to fine-tune the frequency response.
- Integrarea sistemului: The SR-S4S is designed to integrate seamlessly into various audio setups, from small venues to larger installations requiring precise sound projection.
Întreţinere
Regular maintenance ensures the longevity and performance of your SR-S4S speaker system:
- curatenie: Use a soft, dry cloth to wipe down the exterior of the speaker. Do not use abrasive cleaners, solvents, or excessive moisture.
- Inspecţie: Periodically check all cable connections for tightness and signs of wear. Ensure mounting hardware remains secure.
- Depozitare: If storing the speaker for an extended period, keep it in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
Depanare
If you encounter issues with your SR-S4S speaker, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără ieșire de sunet | Conexiuni ale cablurilor slăbite sau incorecte AmpLifter nu este pornit Selecție incorectă a intrării activată ampmai în viață | Check all speaker and ampconexiuni ale lifitorului. Asigura ampLifizerul este pornit și funcționează. Verify correct input source is selected on ampmai în viață. |
| Sunet distorsionat | Volumul este prea mare Cablu de difuzor deteriorat Amptăiere liifier | Reduceți nivelul volumului. Verificați cablurile difuzoarelor pentru a vedea dacă sunt deteriorate; înlocuiți-le dacă este necesar. Verifica amplifier's output level and ensure it's not overdriven. |
| Sunet intermitent | Conexiune slabă Cablu defect | Securizați toate conexiunile. Try a different speaker cable to isolate the issue. |
If the problem persists after attempting these solutions, contact TOA customer support or a qualified service technician.
Specificații
| Caracteristică | Detaliu |
|---|---|
| Tip carcasă | Tip reflex-bass |
| Capacitate de manipulare a puterii | Continuous program 600W |
| Impedanta nominala | 8Ω |
| Sensibilitate (1W, 1m) | 93 dB |
| Raspuns in frecventa | 70-20000Hz (when using DP-0206 (option)) |
| Frecvență Crossover | 3500 Hz |
| Unghiul de directivitate | Orizontală: 90°, Verticală: 10° |
| Low Frequency Component | 10cm cone-type x8 |
| High Frequency Component | 2.5cm balanced dome-type x24 |
| Conectori de intrare | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x2 |
| Dimensiuni (L x A x A) | 160 x 892 x 303mm (6.3 x 35.1 x 11.9 țoli) |
| Greutate | 16 kg (35.3 lbs) / Item Weight: 42.8 pounds (from product data) |
| Numărul de model | SR-S4S |
Garanție și suport
For warranty information, please refer to the warranty card included with your product or visit the official TOA website. For technical support, replacement parts, or service inquiries, please contact TOA customer service through their official channels. Provide your product model number (SR-S4S) and serial number when contacting support.
TOA Electronics
Manufacturer of the SR-S4S Line Array Speaker System.
