Utilitech DC263532 Outdoor Motion-Activated LED Flood Light User Manual

Introducere

Mulțumesc pentru achizițieasing the Utilitech DC263532 Outdoor Motion-Activated LED Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.

Informații importante privind siguranța

Always follow basic safety precautions when installing and operating electrical equipment. Failure to do so may result in fire, electric shock, or serious injury.

• Deconectați alimentarea: Always turn off power at the circuit breaker or fuse box before installation, servicing, or changing any part of the fixture.
• Electrician calificat: Dacă nu sunteți sigur de cablare sau instalare, consultați un electrician calificat.
• Împământare: Ensure the fixture is properly grounded to avoid potential electric shock.
• Numai pentru utilizare în aer liber: This product is designed for outdoor use. Do not install in locations where it may be submerged in water. Note that the product is listed as 'Not Water Resistant' in specifications, indicating it should be protected from direct heavy water exposure.
• Evitați expunerea directă a ochilor: Nu priviți direct în sursa de lumină LED atunci când este aprinsă.
• Montare sigură: Ensure the fixture is securely mounted to a stable surface to prevent it from falling.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea.

• 1 x Utilitech Motion-Activated LED Flood Light Unit
• Mounting Hardware (screws, wire nuts, gasket - typical for hardwire installation, may vary)

Imagine: față view of the Utilitech DC263532 Outdoor Motion-Activated LED Flood Light, showing two adjustable LED heads and the motion sensor below the main housing.

Image: Packaging box for the Utilitech Motion-Activated Security Light, highlighting features like 1200 Lumens, 140-degree detection zone, and 40 ft detection range.

Specificațiile produsului

Ghid de instalare

This flood light is designed for hardwire installation. It can be mounted on a wall or under an eave.

1. Pregătiți pentru instalare: Turn off power at the circuit breaker or fuse box to the location where you will install the flood light. Ensure the power is completely off before proceeding.
2. Alegeți locația de montare: Select a suitable outdoor location on a wall or under an eave. The motion sensor works best when mounted 6-10 feet above the ground.
3. Instalare suport de montare: Atașați suportul de montare (dacă este separat) la cutia de joncțiune folosind șuruburile furnizate. Asigurați-vă că este fixat corect.
4. Conexiuni cablare: Connect the flood light's wires to your household wiring. Typically, this involves connecting the black wire (live) to the black wire, the white wire (neutral) to the white wire, and the green or bare copper wire (ground) to the ground wire from the junction box. Use appropriate wire nuts to secure connections.
5. Asigurați dispozitivul: Carefully tuck the wires into the junction box and attach the flood light fixture to the mounting bracket. Ensure the gasket is properly seated to create a weather-resistant seal.
6. Reglați capetele de lumină: Once mounted, adjust the two LED light heads to cover the desired area.
7. Restabiliți puterea: Reconectați alimentarea la întrerupătorul de circuit sau la cutia de siguranțe.

Instrucțiuni de operare

The Utilitech DC263532 flood light features a motion sensor for automatic operation.

• Detectarea mișcării: The integrated 140-degree motion sensor detects movement within its range (up to 40 ft.) and automatically turns on the light.
• Durata luminii: The light will remain on for a set period after motion is detected and will turn off once no motion is detected for that duration. Specific adjustment settings (e.g., time-on, sensitivity) may be available via controls on the fixture itself (often small dials or switches on the sensor housing). Refer to the physical product for exact adjustment locations.
• Day/Night Sensor: An integrated photocell prevents the light from activating during daylight hours, conserving energy.

Îngrijire și întreținere

Regular maintenance helps ensure optimal performance and longevity of your flood light.

• curatenie: Curățați periodic corpul de iluminat cu o lavetă moale,amp lavetă. Nu utilizați substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul sau componentele electrice. Asigurați-vă că este oprită alimentarea cu energie electrică înainte de curățare.
• Inspecţie: Annually inspect the wiring and mounting for any signs of wear, damage, or loosening.
• LED-uri: Sursa de lumină LED este integrată și nu poate fi înlocuită de utilizator.

Ghid de depanare

If you experience issues with your flood light, consult the following table before contacting support.

Garanție și suport

This Utilitech product comes with a 2 an garanție de la data achiziției, acoperind defectele de materiale și de fabricație în condiții normale de utilizare. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.

For technical assistance, troubleshooting beyond this guide, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official website-ul.