K-Rain AMZ-K2PRO-4PACK

Manual de utilizare a sistemului de irigații K-Rain K2 Pro

Model: AMZ-K2PRO-4PACK | Brand: K-Rain

Introducere

This manual provides comprehensive instructions for the installation, operation, and maintenance of your K-Rain K2 Pro 3/4" Gear Drive Rotor. Designed for efficient and effective watering of lawns and landscapes, the K2 Pro rotor delivers outstanding coverage with high performance and low maintenance. It features a 5-inch pop-up height, adjustable arc from 40° to 360°, and a spray distance of 18 to 40 feet.

Four K-Rain K2 Pro 5-inch pop-up rotors with flow control, along with a set of red nozzles and a gray adjustment key.

Figure 1: K-Rain K2 Pro 5-inch Pop-Up Rotor (4-Pack) with accessories.

Caracteristici cheie

Configurare și instalare

The K-Rain K2 Pro rotor is designed for straightforward installation. Ensure your irrigation system is turned off and depressurized before beginning installation.

Pașii de instalare:

  1. Pregătiți conexiunea: Ensure the 3/4-inch threaded inlet is clean and free of debris. The rotor is designed to be installed directly into a 3/4-inch pipe fitting.
  2. Thread the Rotor: Carefully thread the K2 Pro rotor into the pipe fitting. Hand-tighten first, then use a wrench for a snug fit. Avoid over-tightening.
  3. No Pipe Dope: As indicated on the bottom of the unit, "USE NO PIPE DOPE". This means do not use pipe thread sealant paste or tape on the threads, as it can interfere with the internal mechanisms.
  4. Pozitionare: Ensure the top of the sprinkler head is flush with the ground level once installed.
Fund view of a K-Rain K2 Pro sprinkler rotor showing the 3/4 inch threaded inlet and the text 'USE NO PIPE DOPE'.

Figura 2: De jos view of the K2 Pro rotor, highlighting the 3/4" threaded inlet and the "USE NO PIPE DOPE" instruction.

Instrucțiuni de operare

The K2 Pro rotor features intuitive top-side adjustments for spray distance and arc pattern. These adjustments can be made without disassembling the sprinkler.

Adjusting Arc and Distance:

  1. Identify Left Start Position: The left stop is fixed. To find it, turn the nozzle turret counter-clockwise until it stops. This is the left start position.
  2. Set Right Stop (Arc Adjustment):
    • Insert the K-Rain adjustment key (or a flathead screwdriver) into the arc adjustment slot on the top of the rotor (marked with a 360° arrow).
    • Turn the key clockwise to increase the arc (up to 360°) or counter-clockwise to decrease the arc (down to 40°). The numbers on the top cap indicate the arc setting.
  3. Adjust Spray Distance (Radius):
    • Insert the adjustment key into the distance adjustment slot (marked with '+' and '-' symbols).
    • Turn the key clockwise to decrease the spray distance or counter-clockwise to increase it.
  4. Controlul fluxului: The K2 Pro allows for flow control adjustment. This can be used to turn off individual heads during installation or for quick nozzle changes. Refer to the diagram on the side of the rotor for specific flow control instructions.
Top view of a K-Rain K2 Pro sprinkler rotor showing the arc adjustment dial from 40 to 360 degrees, and the distance adjustment screw.

Figura 3: Sus view of the K2 Pro rotor, showing arc and distance adjustment points.

Întreţinere

The K-Rain K2 Pro rotor is designed for low maintenance. Regular inspection can help ensure optimal performance and longevity.

Depanare

If you encounter issues with your K-Rain K2 Pro rotor, refer to the following common troubleshooting tips:

ProblemăCauza posibilaSoluţie
Rotor not rotating or spraying unevenly.Clogged nozzle, low water pressure, debris in the rotor mechanism.Clean the nozzle. Check system water pressure. Flush the line or inspect the rotor for internal debris.
Rotor not popping up fully.Low water pressure, debris around the pop-up stem, damaged spring.Check system water pressure. Clear debris from around the stem. If spring is damaged, replacement may be necessary.
Water leaking from around the cap.Damaged seal or O-ring, loose cap.Ensure the cap is securely tightened. Inspect and replace seals/O-rings if damaged.
Incorrect spray arc.Arc not properly set.Refer to "Operating Instructions" to re-adjust the arc setting using the adjustment key.

Specificații

Detailed specifications for the K-Rain K2 Pro 3/4" Gear Drive Rotor:

AtributDetaliu
MarcaK-Rain
Numărul de modelAMZ-K2PRO-4PACK
Numărul pieseiAMZ-K2PRO-4PACK
UPC671923123529
MaterialOţel inoxidabil
Finisaj exteriorOţel inoxidabil
Dimensiuni articol (L x l x H)8.39 x 7.13 x 3.35 inci
Greutatea articolului3.16 lire sterline
Dimensiunea conexiunii de intrare0.75 inci (3/4")
Tip de conectare la intrareFiletat
Pop-Up Height5 inci
Spray Distance Range18 - 40 picioare
Arc Spray Pattern40° - 360°
Pre-installed NozzleGPN 2.5
Sursa de alimentareAcționat hidraulic
CuloareRed, Gray, Black
Țara de origineSTATELE UNITE ALE AMERICII
Specificație MetWaterSense
Comparison chart for K-Rain sprinkler models, showing radius, inlet size, GPM, and arc range for various models including MiniPro, RPS 50, RPS 75, RPS 75i, RPS Select, ProPlus, SuperPro, and ProSport.

Figure 4: K-Rain Sprinkler Comparison Chart (for reference).

Garanție și suport

The K-Rain K2 Pro 3/4" Gear Drive Rotor comes with a 5 an garanție, asigurând fiabilitate și performanță pe termen lung.

For further assistance, technical support, or to explore other K-Rain products, please visit the official K-Rain store or website:

Visit the K-Rain Store on Amazon

Documente conexe - AMZ-K2PRO-4PACK

Preview Aspersor acționat cu angrenaj K-Rain RPS Select: Ghid de configurare și reglare
Ghid complet pentru configurarea și reglarea aspersorului acționat prin angrenaj K-Rain RPS Select, inclusiv selectarea duzei, reglarea arcului, instalare și date de performanță.
Preview Instrucțiuni de instalare și instalare a aspersorului cu acționare prin roți dințate K-Rain RPS75
Un ghid complet care detaliază procedurile de configurare, reglare și instalare pentru aspersorul acționat cu roți dințate K-Rain RPS75, inclusiv înlocuirea duzei, setarea arcului, date de performanță și sfaturi de pregătire pentru iarnă.
Preview Manual de utilizare pentru controlerul de irigații Wi-Fi K-Rain PRO-LC
Ghid de instalare, programare și utilizare pentru controlerul de irigații Wi-Fi K-Rain PRO-LC. Aflați despre funcții precum conectivitatea Wi-Fi, aprobarea EPA WaterSense, programarea și gestionarea sistemului.
Preview Controler de irigații K-Rain Pro-LC WiFi-Ready: Manual de instalare, programare și utilizare
Ghid complet pentru instalarea, programarea și operarea controlerului de irigații K-Rain Pro-LC WiFi-Ready. Aflați despre caracteristici, configurare, depanare și specificații pentru udarea eficientă a gazonului și grădinii.
Preview Manual de utilizare pentru controlerul de irigații Wi-Fi pentru interior K-Rain KRX6 cu 6 zone
Un manual de utilizare complet pentru controlerul de irigații Wi-Fi pentru interior K-Rain KRX6 cu 6 zone, care acoperă instalarea, configurarea, operarea și depanarea.
Preview Instrucțiuni de configurare și date de performanță pentru aspersoarele cu acționare prin roți dințate MINIPRO™
Ghid complet pentru configurarea și reglarea aspersorului cu roți dințate K-Rain MINIPRO™, inclusiv schimbarea duzei, reglarea arcului, instalare, sfaturi pentru iarnă și specificații de performanță.