Manual de utilizare NVR 4K cu 10 canale SECULINK

Introducere

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SECULINK 10-Channel 4K Network Video Recorder (NVR). This NVR is designed to manage and record video footage from compatible IP cameras, offering advanced features such as 4K Ultra HD video support, H.265+ compression, motion detection recording, and remote access capabilities. Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

Caracteristicile produsului

• Ultra HD Video: Supports full 4K video viewing on all 10 channels, compatible with 8MP/5MP/4MP/3MP/1080p ONVIF Conformance IP cameras for crystal clear image capture.
• H.265+ Compression Technology: Enhances bandwidth and storage efficiency, resulting in smaller file sizes, higher definition, and extended recording times. Supports simultaneous network transmission and playback.
• Înregistrare detectare mișcare: Configures the NVR to initiate recording only when motion is detected, optimizing storage space and providing intelligent event-based recording.
• Configurare ușoară: Requires a direct wired Ethernet connection to your router for operation. Simplifies management of all connected IP cameras on your network.
• Opțiuni multiple de stocare: Supports up to 6TB HDD (sold separately) and Cloud Storage Service (sold separately). Backup options include USB Flash Disk, USB DVR Writer, and network backup.
• Acces P2P la distanță: Cloud P2P function enables remote viewing on smartphones, tablets, and PCs via the XMeye App, allowing 24/7 monitoring from any location.

Image: Visual comparison of different video resolutions supported by the NVR, including 720P, 1080P, 4MP, 5MP, and Ultra HD 4K (3840x2160).

Image: Diagram illustrating the storage efficiency of H.265+ compression compared to H.264, showing significant reduction in storage requirements.

Conținutul pachetului

Vă rugăm să verificați dacă toate articolele sunt prezente și în stare bună la deschiderea coletului:

• 1x SECULINK 10-Channel Network Video Recorder (NVR)
• 1x adaptor de alimentare
• 1 x mouse USB
• Note: Hard drive (HDD) is not included and must be purchased separately.

Produs terminatview

Panoul frontal

Imagine: De sus în jos view of the SECULINK NVR showing the front panel with "Power" and "Record" indicators, and a rear view displaying all ports.

The front panel of the NVR typically includes LED indicators for power and recording status. These indicators provide quick visual confirmation of the device's operational state.

• Indicator de alimentare: Illuminates when the NVR is powered on.
• Indicator de înregistrare: Flashes or illuminates to indicate active video recording.

Panoul din spate

Image: Close-up of the NVR's rear panel, clearly labeling the VGA, HDMI, LAN (RJ45), USB, and DC 12V power input ports.

The rear panel provides all necessary connection ports for the NVR:

• Ieșire VGA: Connects to a monitor or display via a VGA cable.
• Ieșire HDMI: Connects to a monitor or display via an HDMI cable for high-definition video output.
• LAN (RJ45) Port: Connects the NVR to your network router using an Ethernet cable.
• USB Ports (2x USB2.0): Used for connecting the included USB mouse, external storage devices for backup, or for firmware updates.
• Intrare de alimentare DC 12V: Connects the provided power adapter to supply power to the NVR.
• Ieșire audio (RCA): For connecting to an audio system (if supported by your setup).

Ghid de instalare

1. Hard Drive (HDD) Installation (HDD Not Included)

The NVR requires an internal SATA hard drive for video storage. Follow these steps to install a compatible 3.5" SATA HDD (up to 6TB recommended):

1. Deșurubați șuruburile DVR-ului: Scoateți cu grijă șuruburile care fixează capacul NVR-ului.
2. Accesați hard disk-ul: Gently slide open the cover to expose the internal components. Connect the SATA data cable and power cable from the NVR to the corresponding ports on the hard drive.
3. Instalați șuruburile: Secure the hard drive inside the NVR chassis using the provided screws. Replace the NVR cover and secure it with its screws.

Image: Visual instructions detailing the three steps for HDD installation: unscrewing the cover, connecting the SATA cables, and securing the HDD with screws.

2. Conexiuni la sistem

Connect the NVR to your network and display as follows:

• Connect the NVR's LAN port to your router using an Ethernet cable.
• Connect the NVR's HDMI or VGA output to a monitor or TV.
• Conectați mouse-ul USB la unul dintre porturile USB ale NVR-ului.
• Connect the power adapter to the NVR's DC 12V input and plug it into a power outlet.

Image: A schematic diagram illustrating the network setup, showing IP cameras wirelessly connecting to a router, which is then wired to the NVR, and the NVR connected to a monitor and mouse.

3. Conexiunea camerei

The NVR will automatically detect and add ONVIF-compliant IP cameras connected to the same network. Ensure your IP cameras are powered on and properly configured on your network before attempting to add them to the NVR.

• Access the NVR's interface via the connected monitor and mouse.
• Navigate to the camera management section (refer to the on-screen menu).
• The NVR should list available IP cameras on your network. Select and add them as required.

Instrucțiuni de operare

Moduri de înregistrare

The NVR offers flexible recording options to suit your surveillance needs:

• Înregistrare continuă 24/7: Înregistrări footage continuu pe tot parcursul zilei și al nopții.
• Înregistrare mișcare: The NVR is triggered to record only when motion is detected by the connected cameras. This conserves storage space.
• Înregistrare programată: Set specific times or days for the NVR to record, allowing for customized recording schedules.

Image: Visual representation of the three primary recording modes: 24/7 Continuous Record, Motion Recording (triggered by movement), and Scheduled Recording (based on a set timetable).

Image: Flowchart demonstrating the motion detection recording process: Standby Mode -> Motion Detection Mode-Record -> Standby Mode again if no motion.

Telecomanda Viewing with Mobile App

The SECULINK NVR supports remote viewing via the XMeye Pro mobile application, available for both Android and iOS devices. This allows you to monitor your premises from anywhere with an internet connection.

• Descărcați XMeye Pro APP from Google Play Store or Apple App Store. You can also scan the QR code provided in the image below or visit http://d.xmeye.net/Xmeye.
• Înregistrați un cont și conectați-vă.
• Add your NVR device to the app using its unique device ID or by scanning the QR code displayed on the NVR's interface.
• Odată adăugat, puteți view fluxuri live, redare mâncare înregistratătage, and receive motion alerts directly on your mobile device.

Image: Displays the XMeye Pro app interface on a smartphone, tablet, laptop, and desktop, along with QR codes and logos for downloading the app from Google Play and the App Store.

Image: Depicts a security camera detecting motion and an instant alert message being pushed to a mobile device via the XMeye app, showing the time and channel of the detected event.

Întreţinere

Gestionarea hard disk-ului

Regularly check the status of your hard drive through the NVR's system settings to ensure it is functioning correctly. If the hard drive becomes full, the NVR will typically overwrite the oldest footage. You can configure this behavior in the system settings.

Actualizări de firmware

Verificați periodic datele oficiale SECULINK website or contact customer support for available firmware updates. Firmware updates can improve system stability, add new features, and enhance security. Follow the provided instructions carefully when performing updates to avoid damaging the device.

Depanare

Specificații

Informații de siguranță

Vă rugăm să respectați următoarele măsuri de siguranță pentru a preveni vătămările corporale sau deteriorarea dispozitivului:

Image: A warning label indicating "CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN" and "WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE." It also states "NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL."

• Risc de electrocutare: Do not open the NVR casing. În interior nu există piese care să poată fi reparate de utilizator. Apelați la personal de service calificat pentru orice operațiune de service.
• Pericol de incendiu și șoc: To prevent fire or electric shock, do not expose this appliance to rain or moisture. Do not use units not specifically designed for outdoor use in wet conditions.
• Ventilare: Ensure adequate ventilation around the NVR to prevent overheating. Do not block ventilation openings.
• Sursa de alimentare: Use only the provided power adapter. Ensure the power source matches the voltage requirements of the NVR.
• curatenie: Disconnect the NVR from the power source before cleaning. Use a dry cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.

Garanție și suport

For detailed warranty information, please refer to the warranty card included with your product or contact SECULINK customer support. For additional assistance, you may refer to the official User Guide PDF available online:

Descărcați Ghidul oficial al utilizatorului (PDF)

For technical support or inquiries, please visit the SECULINK official website or contact their customer service department. Keep your product model number (NVR1110PF-4K) and purchase information ready when seeking support.