ApooDr ASF16-18H2B

ApooDr 18000 BTU Mini Split Air Conditioner Ductless Inverter System User Manual

Model: ASF16-18H2B | Brand: ApooDr

1. Introducere și prezentarea produsuluiview

The ApooDr 18000 BTU Mini Split Air Conditioner with Heat Pump is an advanced, energy-efficient system designed to provide optimal climate control for your space. Featuring inverter technology, it offers both powerful cooling and effective heating, suitable for areas up to 1000 sq ft. This system operates quietly and includes a comprehensive installation kit for convenience. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

ApooDr 18000 BTU Mini Split Air Conditioner with indoor unit, outdoor unit, and remote control.

Figure 1.1: Complete ApooDr Mini Split Air Conditioner System with indoor unit, outdoor unit, remote, and installation accessories.

2. Conținutul pachetului

Upon unpacking, please verify that all components listed below are present and in good condition. If any items are missing or damaged, contact customer support immediately.

  • Unitate interioară
  • Unitate exterioară
  • Backlit LCD Remote Control
  • Pre-flared, Insulated Copper Line Set (approx. 16 FT)
  • Fire de comunicație
  • Installation Accessories (e.g., drain hose, wall sleeve)
Image showing the indoor unit, outdoor unit, communication wires, pre-flared insulated copper line set, and remote control included in the package.

Figure 2.1: Visual representation of the main components included in your order.

3. Configurare și instalare

Este necesară o instalare profesională for this mini split system to ensure proper function, safety, and warranty validity. Incorrect installation can lead to system malfunction, property damage, or personal injury.

3.1 Lista de verificare înainte de instalare

  • Ensure the installation area meets local building codes and regulations.
  • Verify electrical supply (220V/60Hz) is compatible and sufficient.
  • Confirm proper drainage for condensate.
  • Ensure adequate clearance around both indoor and outdoor units for airflow and maintenance.

3.2 Pași de instalare (pesteview)

While professional installation is mandatory, a general overview of the process includes:

  1. Mounting the indoor unit on the wall.
  2. Installing the outdoor unit on a stable, level surface.
  3. Connecting the pre-flared copper line set between the indoor and outdoor units.
  4. Connecting electrical wiring and communication cables.
  5. Vacuuming the refrigerant lines to remove air and moisture.
  6. Checking for leaks and performing a test run.

Pentru instrucțiuni detaliate de instalare, pas cu pas, vă rugăm să consultați site-ul oficial Manual de instalare (PDF).

A person giving a thumbs up next to an installed indoor mini split unit and an outdoor unit, indicating successful installation.

Figura 3.1: Example of a professionally installed ApooDr Mini Split System.

4. Moduri de operare

The ApooDr Mini Split system offers five distinct operating modes to ensure your comfort in various conditions. All modes are easily accessible and controllable via the included backlit LCD remote.

4.1 Moduri disponibile

  • Mod auto: The system automatically selects the appropriate operating mode (Cool, Heat, or Fan) based on the set temperature and current room temperature.
  • Mod cool: Provides cooling to lower the room temperature. Adjustable from 62℉ (16.7℃) to 90℉ (32.2℃).
  • Dry Mode (Dehumidification): Reduces humidity in the room without significant temperature change.
  • Mod încălzire: Provides heating to raise the room temperature. Adjustable from 32℉ (0℃) to 86℉ (30℃).
  • Mod ventilator: Circulates air without heating or cooling. Fan speed can be adjusted.

4.2 Funcții de control de la distanță

The backlit LCD remote allows you to:

  • Porniți/Opriți unitatea.
  • Select operating modes.
  • Reglați setările de temperatură.
  • Control fan speed.
  • Set timer functions (Timer ON/OFF).
  • Activate Sleep mode for quiet operation and energy saving.
  • Control oscillation (swing) of the air deflector.
  • Access special features like Turbo, Clean, LED display control, and Follow Me function.
Image showing the indoor unit with air flowing out, indicating both cooling and heating capabilities, and listing the five operating modes: Auto, Cool, Dry, Heat, and Fan.

Figure 4.1: The ApooDr Mini Split system offers 5 versatile operating modes for year-round comfort.

Close-up image of the backlit LCD remote control for the ApooDr Mini Split Air Conditioner, showing various function buttons and the digital display.

Figure 4.2: The intuitive backlit LCD remote control for easy system management.

5. Întreținere

Regular maintenance ensures the longevity and efficient operation of your ApooDr Mini Split system. Always turn off the power to the unit before performing any maintenance.

5.1 Curățarea filtrului de aer

The indoor unit is equipped with a permanently washable and easy-to-clean air filter. Regular cleaning of the air filter is crucial for maintaining air quality and system efficiency.

  • Frecvenţă: Curățați filtrul la fiecare două săptămâni sau mai des, în funcție de utilizare și de calitatea aerului.
  • Pași:
    1. Deschideți panoul frontal al unității interioare.
    2. Gently remove the air filter(s).
    3. Wash the filter(s) with lukewarm water and a mild detergent.
    4. Rinse thoroughly and allow to air dry completely before re-installing. Do not expose to direct sunlight.
    5. Re-install the dry filter(s) and close the front panel.

5.2 Întreținerea unității exterioare

Periodically inspect the outdoor unit for any obstructions (leaves, debris) around the condenser coils and fan. Gently clear any blockages to ensure proper airflow. Professional cleaning of the outdoor coil may be required annually.

6. Depanare

If you encounter issues with your ApooDr Mini Split system, please refer to the official Ghid de depanare (PDF) for detailed solutions. Below are some common issues and general advice:

6.1 Probleme comune și soluții

  • Unitatea nu pornește: Verificați sursa de alimentare, întrerupătorul de circuit și asigurați-vă că bateriile telecomenzii nu sunt descărcate.
  • Insufficient cooling/heating: Verify correct mode selection and temperature setting. Clean air filters. Ensure no obstructions to airflow. Check for ice on the outdoor unit (in heating mode, during defrost cycle).
  • Zgomote neobișnuite: Minor noises during operation are normal. Excessive or unusual noises may indicate a problem; consult the troubleshooting guide or a professional.
  • Water leakage from indoor unit: Check the condensate drain line for blockages or improper slope.

If problems persist after consulting the troubleshooting guide, contact a qualified HVAC technician or ApooDr customer support.

7. Specificații

Key technical specifications for the ApooDr 18000 BTU Mini Split Air Conditioner (Model: ASF16-18H2B):

CaracteristicăCaietul de sarcini
Capacitatea de racire18000 BTU
Capacitatea de incalzire18000 BTU
SEER2 (Raportul de eficiență energetică sezonieră 2)18.3
HSPF2 (Factor de performanță sezonieră 2)8.70
Voltage208/230V / 60Hz
Zona de acoperirePână la 1000 mp
Nivel de zgomot (interior)30 dB
Tipul de agent frigorificPre-Charged R-410A
Indoor Working Temperature (Cooling)62℉ ~ 90℉ (16.7℃ ~ 32.2℃)
Indoor Working Temperature (Heating)32℉ ~ 86℉ (0℃ ~ 30℃)
Outdoor Working Temperature (Cooling)5℉ ~ 122℉ (-15℃ ~ 50℃)
Outdoor Working Temperature (Heating)5℉ ~ 86℉ (-15℃ ~ 30℃)
CertificariAHRI Certified & UL Certified

8. Garanție și asistență

8.1 Garanția produsului

The ApooDr Mini Split Air Conditioner comes with the following warranty coverage:

  • Compresor: 5 ani garanție
  • Piese: 2 ani garanție

Please retain your proof of purchase for warranty claims. The warranty is valid only with professional installation.

8.2 Asistență pentru clienți

For any questions, technical assistance, or warranty claims, please contact ApooDr customer support. Refer to the contact information provided with your product packaging or visit the official ApooDr website-ul pentru detalii de asistență.

Documente conexe - ASF16-18H2B

Preview Manual de utilizare și instalare pentru aparatul de aer condiționat ApooDr seria ASF16
Ghid complet pentru aparatele de aer condiționat ApooDr din seria ASF16, care acoperă informații pentru proprietar, proceduri de instalare, întreținere, depanare și specificații. Aflați cum să instalați și să utilizați în siguranță unitatea de aer condiționat ApooDr.
Preview Manual de utilizare și ghid de instalare pentru aparatul de aer condiționat de cameră ApooDr de tip split
Ghid complet pentru aparatele de aer condiționat de cameră de tip split ApooDr, care acoperă măsurile de siguranță, specificațiile unității, caracteristicile, îngrijirea și întreținerea, depanarea, accesoriile și procedurile detaliate de instalare atât pentru unitățile interioare, cât și pentru cele exterioare. Include conectarea conductelor de agent frigorific, evacuarea aerului, verificări electrice și instrucțiuni de testare.
Preview Manual de instrucțiuni pentru aparatul de aer condiționat de tip split ApooDr
Acest manual de instrucțiuni oferă informații esențiale și recomandări pentru instalarea, funcționarea și întreținerea corectă a aparatului de aer condiționat de tip split ApooDr, pentru a asigura performanțe optime și longevitate.
Preview Declarație de garanție limitată pentru sistemul split cu pompă de căldură cu conducte ApooDr
Declarație oficială de garanție limitată pentru sistemele split cu pompă de căldură cu conducte ApooDr, care detaliază acoperirea, limitările și cerințele de înregistrare a produsului.
Preview Ghid de dimensiuni pentru aparatul de aer condiționat din seria ApooDr AHU3G-24HFN-AB
Specificații dimensionale detaliate în inci pentru unitățile de aer condiționat din seria ApooDr AHU3G-24HFN-AB, inclusiv componente interioare și exterioare. Relevante pentru modelele AHU3G-24HFN-AB-50FT, AHU3G-24HFN-AB-25FT și CAC-24k.
Preview Manual de service pentru aparatul de tratare a aerului ApooDr AHU din seria 3D Inverter din a 3-a generație
Manual de service pentru unitățile de tratare a aerului ApooDr AHU din seria 3D Inverter din a 3-a generație, care acoperă instalarea, operarea, depanarea și măsurile de siguranță pentru modelele AHU3G-24HFN-A până la AHU3G-60HFN-A.