1. Introducere
This manual provides detailed instructions for the installation and operation of the LIGHTAILING LED Light Kit, remote-control version, specifically designed for the LEGO 10293 Santa's Visit building blocks model. This kit enhances the visual appeal of your LEGO model by adding integrated lighting. Please note that the LEGO model itself is not included with this light kit.
2. Informații de siguranță
- Avertisment pentru piese mici: Acest produs conține piese mici și nu este potrivit pentru copiii sub 6 ani din cauza riscului de sufocare.
- Alimentare electrică: Use three AA batteries or a USB charger with a voltage less than 5V. Exceeding 5V may damage the light kit.
- Handling Wires: Install LED lights carefully. Avoid hard pulling, bending, or shaking the wires to prevent damage.
- Siguranta electrica: Ensure all connections are secure before applying power. Do not expose the light kit to water or extreme temperatures.
3. Conținutul pachetului
Verificați dacă toate componentele enumerate mai jos sunt prezente în pachet:
- LED Light Kits (3 USB light kits)
- Telecomanda
- Ghid de instrucțiuni
- Cutie pentru baterii (necesită 3 baterii AA, nu sunt incluse)
4. Configurare
The installation of the light kit is integrated with the LEGO model. It is recommended to follow the detailed instruction guide provided in the package for specific placement of each LED component. The general steps are as follows:
- Prepare the LEGO Model: Ensure your LEGO 10293 Santa's Visit model is assembled or partially disassembled as required by the instruction guide to access specific areas for light placement.
- Install LED Components: Carefully place the LED lights and wires according to the step-by-step instructions. The wires are designed to be thin and can be routed between LEGO bricks.
- Connect to USB Hubs: Connect the individual LED light kits to the provided USB hubs.
- Conexiune de alimentare: Insert three AA batteries into the battery box or connect the USB power cable to a compatible USB power source (less than 5V).
- Lumini de testare: Before fully reassembling the LEGO model, test all lights to ensure they are functioning correctly.
5. Instrucțiuni de utilizare
The LIGHTAILING LED Light Kit for LEGO 10293 Santa's Visit features a remote control for convenient operation.
5.1 Pornire/Oprire
Once the light kit is connected to a power source, the lights can be turned on or off using the remote control.
5.2 Adjusting Light Colors and Modes
The remote control allows you to switch between different light colors and modes, enhancing the display of your LEGO model. Refer to the remote control diagram in the instruction guide for specific button functions.
6. Întreținere
- curatenie: Use a soft, dry cloth to gently wipe any dust from the LED components and wires. Do not use liquid cleaners.
- Înlocuire baterie: If using the battery box, replace all three AA batteries when the lights dim or stop working. Ensure correct polarity.
- Depozitare: When not in use for extended periods, disconnect the power source and store the LEGO model and light kit in a cool, dry place away from direct sunlight.
7. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Luminile nu se aprind. | No power, loose connection, or dead batteries. | Check battery installation/charge, ensure USB power is connected, and verify all wire connections are secure. |
| Unele lumini nu funcționează. | Damaged wire or LED, or loose connection to the USB hub. | Inspect individual wires and LEDs for damage. Re-seat connections to the USB hub. |
| Telecomanda nu răspunde. | Remote battery is dead or remote is too far from the receiver. | Replace the remote control battery. Ensure the remote is within effective range of the light kit's receiver. |
| Luminile sunt slabe. | Putere scăzută a bateriei. | Replace batteries or ensure USB power source is adequate. |
8. Specificații
| Caracteristică | Detaliu |
|---|---|
| Dimensiunile produsului | 6.5 x 4.72 x 1.57 inci |
| Greutatea articolului | 7.6 uncii |
| Numărul de model | 10293 |
| Sursa de alimentare | 3 AA batteries (not included) or USB power (less than 5V) |
| Metoda de control | Telecomanda |
| Varsta Recomandata | 6 ani în sus |
9. Garanție și asistență
LIGHTAILING is committed to providing quality products and services. If you encounter any problems with your LED Light Kit, please do not hesitate to contact customer support.
- Informații de contact: Refer to the contact details provided in your product packaging or visit the official LIGHTAILING website pentru suport.
- Garantie: Specific warranty details are typically included with the product documentation. Please retain your proof of purchase for warranty claims.
