Manual de utilizare Osmo HS Plus 9206 Lac pentru lemn cu un singur strat, stejar deschis, 0.75 l

1. Introducere

Welcome to the instruction manual for your Osmo HS Plus 9206 Single-Coat Wood Stain in Light Oak. This document provides essential information for the safe and effective application, maintenance, and troubleshooting of the product. Please read these instructions carefully before use to ensure optimal results and safety.

1.1 Informații de siguranță

• Ensure adequate ventilation during application and drying.
• Purtați echipament individual de protecție adecvat, inclusiv mănuși și ochelari de protecție.
• A nu se lăsa la îndemâna copiilor și a animalelor de companie.
• Do not ingest. In case of ingestion, seek immediate medical advice.
• Dispose of product residues and empty containers according to local regulations.

2. Produs terminatview

The Osmo HS Plus 9206 is a high-quality, single-coat wood stain designed for exterior wood surfaces. It is formulated with natural oils, providing excellent protection against weathering, UV radiation, and moisture. The stain offers a satin, smooth finish that is open-pored, allowing the wood to breathe. This prevents cracking, peeling, or flaking of the coating. It is also biocide-free and preservative-free, making it an environmentally conscious choice.

2.1 Caracteristici cheie

• Single-Coat Application: Achieves full color and protection in one application.
• Natural Oil-Based: Provides deep penetration and nourishment for the wood.
• Finisaj satinat: Delivers an elegant, smooth appearance.
• Hidrofug: Protects against moisture ingress.
• Open-Pored: Allows wood to breathe, preventing cracking and peeling.
• Biocide and Preservative-Free: Safer for users and the environment.
• Rezistent UV: Protects wood from graying due to sun exposure.

3. Pregătire

3.1 Pregătirea suprafeței

• The wood surface must be clean, dry, and frost-free (maximum moisture content 20%).
• Remove any old paints, varnishes, or thick-film stains completely by sanding or stripping.
• Old open-pored stains or weathered wood can be cleaned and lightly sanded.
• Ensure the surface is free from dust, dirt, grease, and other contaminants.
• For new or untreated wood, a light sanding (e.g., P120-P150 grit) is recommended to ensure optimal adhesion.

3.2 Product Preparation

• Thoroughly stir the Osmo HS Plus 9206 wood stain before use. Do not dilute.
• Ensure the product is at room temperature (18-22°C) for best application results.

4. Application (Setup)

Follow these steps for proper application of the Osmo HS Plus 9206 Single-Coat Wood Stain:

1. Instrumente: Use an Osmo Flat Brush, a microfiber roller, or an Osmo Hand Pad with a fleece applicator.
2. Primul strat: Apply a very thin and even coat along the wood grain. Ensure the product is spread thinly and uniformly.
3. Acoperire: One 0.75L can covers approximately 15 m² with a single coat, depending on the wood type and surface absorbency.
4. Îndepărtarea excesului: Immediately remove any excess product with a dry cloth to prevent shiny spots or uneven drying.

Image of Osmo HS Plus 9206 Single-Coat Wood Stain can. This shows the product packaging for identification.

Image of wood treated with Osmo HS Plus 9206 Light Oak stain, showing the finished color and texture. This illustrates the expected appearance after application.

5. Drying and Curing (Operating)

Proper drying is crucial for the durability and appearance of the finish.

• Timp de uscare: Allow approximately 12 hours for the stain to dry under good ventilation and normal conditions (23°C / 50% relative humidity). Lower temperatures or higher humidity will extend drying times.
• Reacoperire: As this is a single-coat product, a second coat is generally not required. If a deeper color or enhanced protection is desired on highly exposed areas, a very thin second coat can be applied after the first coat is completely dry.
• Full Curing: The stain will achieve its full hardness and resistance after approximately 2-3 weeks. Avoid heavy use or exposure to harsh conditions during this period.

6. Întreținere

Regular maintenance will prolong the life and beauty of your stained wood surfaces.

• curatenie: Pentru curatenie generala folositi adamp cloth with a mild, pH-neutral cleaner. Avoid harsh chemicals or abrasive cleaning tools.
• Reaplicare: When signs of wear, fading, or weathering become visible (typically after several years, depending on exposure), clean the surface thoroughly and reapply a thin coat of Osmo HS Plus 9206. No sanding is usually required for maintenance coats, provided the old finish is intact and clean.
• Spot Repair: Small damaged areas can be cleaned and recoated locally without visible overlaps.

7. Depanare

Iată soluții pentru problemele comune pe care le-ați putea întâmpina:

• Uneven Application/Streaks: This usually occurs if too much product is applied or not spread evenly. Ensure to apply very thinly and wipe off any excess immediately.
• Sticky Surface After Drying: This indicates over-application. The excess product has not fully penetrated or dried. Ensure good ventilation and wipe off any remaining sticky residue with a cloth dampened with Osmo Brush Cleaner and Thinner.
• Poor Adhesion/Flaking: This is often due to improper surface preparation, such as applying over old, incompatible coatings or on a dirty/greasy surface. Ensure the surface is clean, dry, and properly prepared as per Section 3.1.
• Variație de culoare: Natural wood varies in absorbency and color. Always perform a test application on a small, inconspicuous area to confirm the desired color result.

8. Specificații

9. Garanție și asistență

For specific warranty information or technical support regarding your Osmo HS Plus 9206 Single-Coat Wood Stain, please refer to the product packaging or visit the official Osmo website. You may also contact Osmo customer service directly for assistance with product application, compatibility, or any other inquiries.

Vă rugăm să păstrați dovada achiziției pentru orice reclamații în garanție.