Introducere
This manual provides comprehensive instructions for the setup, operation, and maintenance of your TASCO Low Glow 12 Mega Pixels Trail Camera. Designed for reliability and ease of use, this camera captures high-quality images and 720P video, making it an excellent tool for wildlife monitoring, hunting, and security surveillance.
Figura 1: Față view of the TASCO Low Glow 12 MP Trail Camera, showcasing its compact design and IR flash array.
Caracteristici cheie:
- Crystal Clear 12 Mega Pixel Images: Capture high-resolution still photographs.
- 720P Video Recording: Înregistrați videoclipuri claretage.
- PIR Motion Sensor with 70FT Range: Detects movement up to 70 feet away for automatic capture.
- 70FT Low Glow IR Flash: Provides illumination for night captures without startling wildlife, with a range of up to 70 feet.
- Durată lungă de viață a bateriei: Operates for up to 12 months on 8 AA batteries (not included).
- Design durabil: IP67 International Protection Rating ensures resistance to dust and water.
Ce este în cutie
Upon unpacking your TASCO Trail Camera, please verify that all components are present and in good condition:
- TASCO Low Glow 12 MP Trail Camera (OD Green)
- Curea de montare
Figure 2: Contents of the box, including the trail camera and the mounting strap.
Înființat
1. Instalarea bateriei
- Open the camera housing latch.
- Localizați compartimentul bateriei.
- Insert 8 new AA alkaline or lithium batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Închideți bine compartimentul bateriei.
2. Introducerea cardului SD
- Cu carcasa camerei deschisă, localizați slotul pentru cardul SD.
- Insert a formatted SD card (up to 32GB, Class 10 recommended) into the slot until it clicks into place. Ensure the card is inserted in the correct orientation.
- Pentru a scoate cardul, împingeți ușor până când acesta iese.
3. Montarea camerei
- Select a suitable location for your camera, such as a tree or post, ensuring a clear view a zonei dorite.
- Introduceți cureaua de montare furnizată prin fantele de pe spatele camerei.
- Securely fasten the strap around the mounting surface. Adjust the camera angle as needed.
Operating Your Trail Camera
1. Pornire/Oprire
- To power on, slide the power switch to the 'ON' position. The indicator light will briefly illuminate.
- Pentru a opri, glisați comutatorul de alimentare în poziția „OPRIT”.
2. Selectarea modului
The camera typically features different operating modes, such as Photo, Video, or Photo+Video. Refer to the on-screen menu (if available) or physical switch to select your desired capture mode.
3. Senzor de mișcare PIR
The Passive Infrared (PIR) sensor detects heat and motion within its 70-foot range. When motion is detected, the camera will trigger and capture an image or video according to your selected settings.
4. Low Glow IR Flash
For night captures, the camera utilizes a 70-foot Low Glow IR flash. This technology emits infrared light that is nearly invisible to the human eye and most animals, allowing for discreet night photography and videography.
Figura 3: Example of a daytime image captured by the trail camera, showing a deer in its natural habitat.
Figura 4: Example of a nighttime image captured by the trail camera, demonstrating the effectiveness of the Low Glow IR flash.
5. Viewînregistrarea mediilor capturate
La view images and videos, remove the SD card from the camera and insert it into a compatible device such as a computer or an SD card reader. Navigate to the DCIM folder on the SD card to access your media files.
Întreţinere
1. Curatenie
- Gently wipe the camera lens and PIR sensor window with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
- Curățați corpul camerei cu reclameamp pânză după cum este necesar.
2. Îngrijirea bateriei
- Replace all batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.
- Scoateți bateriile dacă nu veți utiliza camera pentru o perioadă lungă de timp, pentru a preveni scurgerile.
3. Depozitare
- Depozitați camera într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
Depanare
| Emisiune | Cauza posibila | Soluţie |
|---|---|---|
| Camera nu pornește | Incorrect battery installation; Dead batteries; Corrupted SD card. | Check battery polarity; Replace all batteries; Remove SD card and try powering on. |
| Calitate slabă a imaginii/videoului | Dirty lens/sensor; Low light conditions; Object too far/close. | Clean lens and sensor; Ensure adequate lighting or proper IR flash usage; Adjust camera placement. |
| Video not playing on mobile devices (e.g., Apple products) | Video format incompatibility (AVI); Device limitations. | Use a computer to view videos; Convert video files to a compatible format; Use a dedicated SD card reader for your mobile device. |
| Durată scurtă de viață a bateriei | Frequent triggers; Cold weather; Low-quality batteries. | Reduce trigger sensitivity; Use lithium batteries in cold weather; Use high-quality alkaline or lithium batteries. |
Specificatii tehnice
| Caracteristică | Caietul de sarcini |
|---|---|
| Rezoluție statică efectivă | 12 MP |
| Rezoluție captură video | 720p |
| Format de captură video | AVI |
| Gama senzorului de mișcare PIR | 70 FT |
| Raza blițului IR | 70 FT (Low Glow) |
| Sursa de alimentare | 8 x baterii AA (nu sunt incluse) |
| Tehnologia de conectivitate | Wireless (Wi-Fi) |
| Evaluarea internațională de protecție | IP67 |
| Dimensiuni produs (L x l x H) | 6 x 4 x 3 inci |
| Greutatea articolului | 12 uncii |
| Culoare | OD Verde |
| Componente incluse | Curea |
Garanție și suport
For warranty information, technical support, or service inquiries, please refer to the contact details provided with your product packaging or visit the official Vikeri webPăstrați bonul fiscal ca dovadă a achiziției pentru reclamații în garanție.
For additional assistance, you may also contact the manufacturer, Tasco, directly through their official support channels.
