Manual de utilizare pentru calibrul de grosime a vopselei GYS 059856

1. Introducere

This manual provides detailed instructions for the safe and effective use of the GYS 059856 Paint Thickness Gauge. This portable device is designed for quick and easy measurement of non-magnetic coatings (such as paint or film) on metallic surfaces. It is an essential tool for various applications including the processing industry, automotive repair, metal treatment, chemical industry, and goods inspection.

Vă rugăm să citiți cu atenție acest manual înainte de a utiliza dispozitivul și să îl păstrați pentru referințe ulterioare.

2. Informații de siguranță

• Always ensure the device is clean and dry before use.
• Nu expuneți dispozitivul la temperaturi extreme, umiditate sau lumina directă a soarelui.
• Evitați scăderea sau supunerea dispozitivului la impacturi puternice.
• Nu încercați să dezasamblați sau să reparați dispozitivul singur. Apelați la personal calificat pentru service.
• Nu lăsați dispozitivul la îndemâna copiilor.
• Aruncați bateriile în mod responsabil, conform reglementărilor locale.

3. Produs terminatview

The GYS 059856 Paint Thickness Gauge features a compact design with an LCD display and intuitive controls.

Figura 1: Față view of the GYS 059856 Paint Thickness Gauge. The device is yellow with a black LCD screen at the top. Below the screen are three black buttons: 'MODE' on the left, 'UNIT' on the right, and 'ZERO' with a power symbol in the center bottom.

3.1 componente cheie

• Display LCD: Shows measurement readings, units, and mode indicators.
• Butonul MOD: Used to switch between measurement modes (Single, Continuous, Differential).
• Butonul UNIT: Used to switch between metric (µm) and imperial (mils) units.
• Butonul ZERO: Used for zero calibration and powering the device on/off.
• Measurement Probe: Located at the bottom of the device, used to contact the surface for measurement.

4. Configurare

4.1 Instalarea bateriei

Locate the battery compartment on the back of the device. Insert the required batteries, ensuring correct polarity. Close the battery compartment securely.

4.2 Pornire/Oprire

Țineți apăsat butonul ZERO button to power on the device. To power off, press and hold the ZERO button again. The device also features an automatic shut-off function to conserve battery life.

5. Instrucțiuni de utilizare

The GYS 059856 offers three measurement modes and supports both metric and imperial units.

5.1 Selecting Measurement Units

Apăsați tasta UNITATE button to toggle between metric (µm) and imperial (mils) units.

5.2 moduri de măsurare

Apăsați tasta MOD button to cycle through the following measurement modes:

• Single Measurement Mode: Takes a single reading each time the probe is placed on the surface.
• Continuous Measurement Mode: Continuously takes readings as the probe is moved across the surface.
• Differential Measurement Mode: Displays the difference between the current reading and a previously set reference value.

5.3 Luarea unei măsurători

1. Ensure the surface to be measured is clean and free of debris.
2. Select the desired measurement unit and mode.
3. Place the measurement probe firmly and perpendicularly onto the coated metallic surface.
4. Read the thickness value displayed on the LCD screen.
5. Lift the device from the surface to prepare for the next measurement (in Single mode).

6. Calibrare

Accurate measurements depend on proper calibration. The device supports three calibration functions:

6.1 Calibrare la zero

This calibration is performed on an uncoated, bare metallic surface to establish a zero reference point. Place the probe on a clean, uncoated metal surface and follow the on-screen instructions or refer to the device's specific calibration sequence (usually involving the ZERO buton).

6.2 Calibrare în două puncte

This method uses two known thickness standards (e.g., a thin film and a thicker film) to calibrate the device across a range. This provides more accurate readings for varying thicknesses.

6.3 Easy Calibration

Refer to the device's specific instructions for "Easy Calibration," which may involve a simplified process for quick adjustments.

Note: Always calibrate the device before critical measurements or if you suspect inaccurate readings.

7. Întreținere

• curatenie: Ștergeți dispozitivul cu o lavetă moale și uscată. Nu utilizați substanțe de curățare abrazive sau solvenți.
• Depozitare: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the batteries.
• Îngrijirea sondei: Keep the measurement probe clean and free from scratches or damage.

8. Depanare

9. Specificații

• Model: GYS 059856
• Producător: GYS
• Dimensiuni produs (L x l x H): 10.5 x 6.1 x 2.8 cm
• Greutate: 137 de grame
• Principiul de măsurare: Non-magnetic coating on metallic surfaces
• Unități de măsură: Metric (µm), Imperial (mils)
• Moduri de măsurare: Single, Continuous, Differential
• Calibration Functions: Zero calibration, 2-point calibration, Easy calibration
• Oprire automată: Da
• ASIN: B09GS7G1N4
• Referință producător: 059856
• Disponibilitatea pieselor de schimb: Informații nu sunt disponibile

10. Garanție și asistență

For warranty information and technical support, please refer to the official GYS website or contact your local distributor. Information regarding spare parts availability is not provided in the product specifications.

GYS Official Website: www.gys.fr