1. Introducere
Thank you for choosing the SEBSON LED Outdoor Luminaire with Motion Detector. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor light. Please read these instructions carefully before installation and retain them for future reference.
2. Instrucțiuni de siguranță
- Instalarea trebuie efectuată de către un electrician calificat, în conformitate cu reglementările locale privind cablarea.
- Ensure the power supply is disconnected before installation, maintenance, or repair.
- This product is designed for outdoor use only (IP65 rated).
- Do not attempt to modify or repair the luminaire yourself. Contact qualified personnel for service.
- The integrated LEDs are non-replaceable. Do not attempt to remove or replace them.
- Avoid looking directly into the light source when it is active.
3. Conținutul pachetului
Verificați dacă toate componentele sunt prezente și nedeteriorate:
- SEBSON LED Outdoor Luminaire with Motion Detector (Model: WAL_SENSOR_L_INT)
- Elemente de montare (șuruburi, dibluri)
- Manual de instructiuni
4. Caracteristicile produsului
- Integrated Motion Detector: PIR sensor with a detection range of 9 meters and a 140° angle.
- Setări reglabile: Customize light sensitivity (3-2,000 LUX) and illumination duration (10 seconds - 5 minutes).
- Cap de lumină rotativ: The light can be rotated 90° vertically and 330° horizontally for optimal light direction.
- Construcție durabilă: Anthracite plastic casing with IP65 protection, suitable for outdoor environments.
- Iluminare strălucitoare: 15W, 1300lm, 6000K cool white light.
Image: Key features of the SEBSON LED outdoor luminaire, highlighting the motion detector, programmability, IP65 rating, and rotatable head.
Image: Illustration of the luminaire's rotatable head, showing 90° vertical and 330° horizontal adjustment capabilities.
5. Configurare și instalare
Important: Ensure the main power supply is switched off before beginning installation.
- Alegeți locația: Select a suitable outdoor location for wall mounting, ensuring the motion detector has an unobstructed view of the desired detection area.
- Pregătiți suprafața de montare: Mark the drilling points on the wall using the luminaire's mounting plate as a template.
- Găuri: Dați găuri în pozițiile marcate și introduceți diblurile de perete corespunzătoare.
- Cablaj: Connect the luminaire's electrical wires to your mains power supply. Ensure correct polarity (Live, Neutral, Earth). All connections must be secure and insulated.
- Mount Luminaire: Secure the luminaire to the wall using the provided screws. Ensure it is firmly attached.
- Reglați capul luminii: Rotate the light head to the desired vertical (up to 90°) and horizontal (up to 330°) position.
Imagine: Spate view of the luminaire, showing the mounting plate and attachment points for installation.
6. Operating and Motion Sensor Settings
The motion detector has two adjustable settings: LUX (light sensitivity) and TIME (illumination duration).
- Controale de acces: The adjustment dials are located on the motion sensor. Gently rotate the sensor cover to reveal the dials.
- LUX Setting (Light Sensitivity):
- This dial controls the ambient light level at which the sensor activates the light.
- Rotate towards the 'sun' symbol for activation during both day and night (high LUX).
- Rotate towards the 'moon' symbol for activation only in low light conditions (low LUX, 3-2,000 LUX range).
- TIME Setting (Illumination Duration):
- This dial sets how long the light remains on after motion is detected.
- Adjust from 10 seconds to 5 minutes.
- Interval de detectare: The motion sensor has a maximum detection range of 9 meters and a 140° angle. Consider the mounting height (recommended 1.80m - 2.50m) for optimal performance.
Image: Close-up of the motion sensor, showing the protective cover and the underlying LUX and TIME adjustment dials.
Image: Diagram illustrating how to access and adjust the LUX and TIME settings on the motion sensor.
Image: Diagram showing the motion detection range of the luminaire, indicating a 140° angle and a maximum distance of 9 meters.
7. Întreținere
Regular maintenance ensures optimal performance and longevity of your luminaire.
- curatenie: Clean the luminaire's surface with a soft, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Inspecţie: Periodically check the luminaire and its wiring for any signs of damage or wear.
- LED-uri: The integrated LEDs are designed for a long lifespan and are not user-replaceable.
8. Depanare
Dacă întâmpinați probleme, consultați următoarele probleme și soluții comune:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. | Fără alimentare. LUX setting too low. Motion not detected. | Verificați conexiunea de alimentare și întrerupătorul de circuit. Adjust LUX setting towards 'sun' symbol. Verify detection area and sensor position. |
| Lumina rămâne aprinsă continuu. | Mișcare continuă în zona de detectare. TIME setting too long. Defecțiune a senzorului. | Remove obstructions or reposition sensor. Adjust TIME setting to a shorter duration. Contactați asistența dacă problema persistă. |
| Lumina clipește sau pâlpâie. | Alimentare instabilă. Conexiunea cablajului slab. | Consultați un electrician pentru a verifica alimentarea cu energie electrică. Ensure all wiring connections are secure (power off first). |
| Motion detector not sensitive enough. | LUX setting too high. Senzor obstrucționat. Mounting height incorrect. | Adjust LUX setting towards 'moon' symbol. Clear any obstructions from sensor view. Ensure mounting height is within 1.80m - 2.50m. |
Dacă problema persistă după încercarea acestor soluții, vă rugăm să contactați serviciul de asistență pentru clienți.
9. Specificații
| Marca | SEBSON |
| Numărul de model | WAL_SENSOR_L_INT |
| Dimensiuni produs (L x l x H) | 23 x 7.8 x 13.4 cm |
| Greutate | 381 g |
| Evaluare IP | IP65 |
| Culoare | Antracit |
| Material | Plastic |
| Voltage | 230 volți |
| Wattage | 15 wați |
| Flux luminos | 1300 lm |
| Temperatura de culoare | 6000 Kelvin (alb rece) |
| Indicele de redare a culorilor (CRI) | 80.00 |
| Durata medie de viață | 15000 de ore |
| Interval de detectare a mișcării | 9m / 140° |
| Adjustable Illumination Duration | 10 secunde - 5 minute |
| Adjustable Light Sensitivity | 3-2,000 LUX |
| Rotabilitatea | 90° vertical, 330° orizontal |
| Sursa de alimentare | Electric cu fir |
| Tip de instalare | Montare pe perete |
| Reglabil | Nu |
| Țara de origine | China |
Image: Technical drawing showing the dimensions of the SEBSON LED outdoor luminaire in millimeters.
10. Garanție și asistență
Pentru informații despre garanție și asistență pentru clienți, vă rugăm să consultați distribuitorul sau reprezentanța oficială a producătorului. website. Specific details regarding spare parts availability and software updates are not provided in the product information.
