1. Introducere
This manual provides essential information for the safe and effective use of your Ortis Refrigerator Surge Protector. This device is designed to safeguard your refrigerator and other home appliances from various electrical irregularities, including high and low voltage, spikes, instant surges, power failures, voltage fluctuations, brownouts, and load shedding. Please read this manual thoroughly before installation and operation.
2. Informații de siguranță
- Siguranta electrica: Always ensure the power outlet is properly grounded and rated for the device's specifications (120V/15A 60Hz).
- Numai pentru utilizare în interior: This surge protector is intended for indoor use in dry locations. Do not expose it to moisture or extreme temperatures.
- Compatibilitate aparat: Connect only appliances within the specified voltage and current limits. Do not overload the protector.
- Inspecţie: Regularly inspect the surge protector and its connected cables for any signs of damage. Discontinue use if damage is observed.
- Copii și animale de companie: Nu lăsați dispozitivul la îndemâna copiilor și a animalelor de companie.
- dezasamblarea: Do not attempt to open or modify the surge protector. Refer all servicing to qualified personnel.
3. Caracteristicile produsului
The Ortis Refrigerator Surge Protector is equipped with several features designed for optimal appliance protection:
- Protecție cuprinzătoare: Guards against high and low voltage, spikes, instant surges, power failures, voltage fluctuations, brownouts, and load shedding.
- Prize duble: Features two outlets, allowing protection for two appliances simultaneously, such as a refrigerator and a microwave, or a water cooler.
- Indicatoare LED: Clear LED lights indicate the current voltage status (Normal, High Voltage, Vol. scăzuttage) and the active delay period.
- 3-Minute Time Delay: After a power fluctuation, the device initiates a 3-minute delay before re-establishing power. This ensures voltage stability and prevents damage from rapid power cycling.
- Design plug-and-play: Instalare simplă fără cablare complexă.
- Design care economisește spațiu: Proiectat pentru a nu obstrucționa prizele adiacente.
Imaginea 3.1: Pesteview of the Ortis Refrigerator Surge Protector and its key features.
4. Configurare și instalare
Follow these steps to properly install your Ortis Refrigerator Surge Protector:
- Despacheta: Scoateți cu grijă dispozitivul de protecție la supratensiune din ambalaj.
- Inspecta: Verificați dacă dispozitivul prezintă deteriorări vizibile. Nu îl utilizați dacă este deteriorat.
- Localizați priza: Choose a standard 120V/15A wall outlet that is easily accessible and not shared with other high-power appliances.
- Plug In Protector: Insert the Ortis Refrigerator Surge Protector directly into the wall outlet. Ensure it is firmly seated.
- Conectați aparatele: Plug your refrigerator and/or other compatible appliances (up to two) into the outlets on the surge protector. Ensure appliance plugs are in good condition.
- Montare (Opțional): The unit can be mounted to the wall using screws or an adhesive pad (mounting hardware not included unless specified by manufacturer).
Image 4.1: The Ortis Refrigerator Surge Protector ready for connection to a wall outlet.
Imaginea 4.2: Example of the surge protector connected to a refrigerator and another appliance.
5. Instrucțiuni de utilizare
Once installed, the Ortis Refrigerator Surge Protector operates automatically. Observe the LED indicators for status information:
- Normal Voltage (Green LED): When the green "Normal Voltage" LED is illuminated, the voltage is within the safe operating range (90VAC to 135VAC), and power is supplied to your appliances.
- Înalt Voltage (Red LED): If the red "High Voltage" LED lights up, the input voltage exceeds 135VAC. The protector will automatically cut off power to protect connected appliances.
- Vol. Scăzuttage (Red LED): If the red "Low Voltage" LED lights up, the input voltage drops below 90VAC. The protector will automatically cut off power to protect connected appliances.
- Delay Period (Yellow LED): After a power cut-off due to voltage abnormality, or when power is first applied, the yellow "Delay Period" LED will illuminate. This indicates a 3-minute waiting period before power is restored to ensure voltage stability. Do not unplug appliances during this period.
Image 5.1: Explanation of the LED indicators on the surge protector.
6. Întreținere
The Ortis Refrigerator Surge Protector requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- curatenie: Disconnect the device from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Conditii de mediu: Ensure the device is kept in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
- Organizare de cabluri: Evitați îndoirea sau ondularea excesivă a cablului de alimentare.
7. Depanare
If you encounter issues with your Ortis Refrigerator Surge Protector, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| No power to appliances, no LEDs lit. | Protector not plugged in, wall outlet has no power, or internal fault. | Ensure protector is fully plugged into a live outlet. Test the wall outlet with another device. If still no power, the unit may be faulty. |
| Red "High Voltag„e” sau „Volum scăzut”tage" LED is lit, no power to appliances. | Vol. De intraretage is outside safe operating range. | This is normal operation. The protector is safeguarding your appliances. Wait for the voltage to stabilize and the "Delay Period" LED to activate, followed by the "Normal Voltage" LED. |
| Yellow "Delay Period" LED is lit for more than 3 minutes. | Voltage fluctuations are ongoing, or an internal fault. | Ensure the power supply is stable. If the delay persists indefinitely, unplug the protector, wait a few minutes, and plug it back in. If the issue continues, contact customer support. |
| Appliances are not receiving power, but "Normal Voltage" LED is lit. | Appliance issue, or loose connection. | Check if the appliance is properly plugged into the protector. Test the appliance by plugging it directly into a wall outlet (if safe to do so). |
8. Specificații
- Model: B09BN44ZPZ
- Marca: Ortis
- Dimensiuni produs: 2 x 1 x 1 inci (aproximativ)
- Greutatea articolului: 11.3 uncii
- Lungimea cablului: 18.1 inchi
- Culoare: Portocale
- Total prize de curent: 2
- Voltage Evaluare: 120V / 15A / 60Hz
- Înalt Voltage Limitare: >135VAC
- Vol. Scăzuttage Limitare: <90VAC
- Întârziere: 3 minute
- Data primului disponibil: 22 august 2021
Image 8.1: Physical dimensions of the Ortis Refrigerator Surge Protector.
9. Garanție și asistență
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Ortis webPăstrați bonul fiscal ca dovadă a achiziției.
