1. Introducere
This manual provides detailed instructions for the installation, operation, and maintenance of your KING K902-W Hoot WiFi Smart Programmable Thermostat. This device is designed to control line voltage electric heating systems, offering advanced programming capabilities and remote control via the Hoot smartphone application. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Imagine: față view of the KING K902-W Hoot WiFi Smart Programmable Thermostat, displaying current temperature and schedule.
2. Informații de siguranță
AVERTIZARE: Electrical shock hazard. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Failure to follow these instructions could result in serious injury or death.
- Always disconnect power at the main service panel before installing or servicing the thermostat.
- This thermostat is designed for line voltage electric heating systems only (120/208/240V). Do not use with low voltage systems (e.g., gas furnaces, oil furnaces, central air conditioners).
- Asigurați-vă că toate conexiunile cablajului sunt sigure și izolate corespunzător.
- Do not operate the thermostat with a damaged casing or if it has been exposed to water.
- Keep the thermostat away from direct sunlight, heat sources, and drafts for accurate temperature sensing.
3. Conținutul pachetului
Verificați dacă toate articolele sunt prezente în colet:
- KING K902-W Hoot WiFi Smart Programmable Thermostat
- Șuruburi de montare
- Manual de utilizare (acest document)
4. Instalare
4.1 Wiring (Double Pole, 4-Wire)
The K902-W thermostat is designed for double pole, 4-wire line voltage installations (120/208/240V). It is crucial to follow the wiring diagram provided and adhere to all local electrical codes. If you are unsure about any part of the installation, consult a qualified electrician.
- Deconectați alimentarea: Turn off power to the heating circuit at the main service panel before beginning.
- Scoateți termostatul vechi: Carefully remove your existing thermostat. Note the wiring connections.
- Conectează firele: Connect the four wires from your heating system to the corresponding terminals on the K902-W thermostat. Typically, two wires are for the incoming line voltage and two wires go to the heater load. Refer to the diagram below for specific terminal identification.
- Conexiuni sigure: Asigurați-vă că toate conexiunile cablurilor sunt strânse și sigure.
Imagine: Spate view of the KING K902-W thermostat, illustrating the wiring terminals for double pole, 4-wire connection.
4.2 Montare
After wiring, carefully mount the thermostat to the wall electrical box using the provided screws. Ensure the thermostat is level and securely fastened. Do not overtighten the screws.
5. Initial Setup and Wi-Fi Connection
Once installed and power is restored, the thermostat will power on. Follow the on-screen prompts for initial setup, including date, time, and temperature unit selection.
Image: Close-up of the KING K902-W thermostat's LCD touchscreen, displaying initial setup options.
5.1 Hoot Smart Phone App
To utilize the smart features and remote control, download the Hoot Smart Phone App from your device's app store. The app is compatible with both iOS and Android devices.
- Descărcați aplicația: Caută "Hoot Smart" in the Apple App Store or Google Play Store.
- Creează cont: Open the app and follow the instructions to create a new user account.
- Pair Thermostat: In the app, select to add a new device. Follow the on-screen instructions on both the app and the thermostat to connect to your home Wi-Fi network. Nota: The thermostat supports 2.4GHz Wi-Fi networks only.
Image: A smartphone screen showing the Hoot application interface, used for remote control and programming of the thermostat.
6. Instrucțiuni de utilizare
6.1 Interfață cu ecran tactil
The thermostat features a large LCD touchscreen for direct control. The main screen displays the current temperature, set temperature, operating mode, and Wi-Fi status. Use the up/down arrows to adjust the set temperature. The power icon turns the heating system on or off. The hand icon activates a temporary hold.
6.2 Programări
The K902-W allows for programmable schedules with 4 or 6 time periods per day. This feature helps optimize energy usage by adjusting temperatures automatically based on your daily routine. Schedules can be set directly on the thermostat or more conveniently through the Hoot app.
- Access the 'Schedule' or 'Program' menu on the thermostat or within the Hoot app.
- Define desired temperatures for each time period (e.g., Wake, Away, Home, Sleep).
- Apply the schedule to specific days of the week or all days.
6.3 Controlul temperaturii
You can manually adjust the temperature at any time. This adjustment will typically override the current schedule until the next scheduled period begins. To maintain a specific temperature indefinitely, use the 'Hold' function. The thermostat also features a user-defined maximum temperature lock to prevent settings from exceeding a certain limit.
7. Întreținere
The KING K902-W thermostat requires minimal maintenance.
- curatenie: Ștergeți ecranul și casing cu un d moaleamp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Actualizări firmware: The thermostat supports Over-The-Air (OTA) firmware updates. Ensure your thermostat is connected to Wi-Fi to receive automatic updates that improve performance and add new features.
8. Depanare
Consultați tabelul de mai jos pentru problemele comune și soluțiile acestora.
| Emisiune | Cauza posibila | Soluţie |
|---|---|---|
| Termostatul nu pornește | Nu există curent de la întrerupătorul de circuit; cablare incorectă. | Check circuit breaker and ensure it is ON. Verify wiring connections are correct and secure. Consult an electrician if necessary. |
| Probleme de conexiune Wi-Fi | Incorrect Wi-Fi password; 5GHz network selected; weak signal; router issues. | Ensure correct 2.4GHz Wi-Fi network and password. Move thermostat closer to router or consider a Wi-Fi extender. Restart your router. |
| Thermostat screen frozen/unresponsive | Eroare temporară de software. | Turn off power to the thermostat at the circuit breaker for 30 seconds, then restore power. |
| Heater not shutting off or running continuously | Faulty thermostat; wiring error; thermostat placed in a cold draft. | Verify thermostat settings and schedule. Check wiring for shorts. Ensure thermostat is not in a cold draft. If issue persists, contact support. |
| Citiri inexacte ale temperaturii | Thermostat exposed to direct sunlight, heat source, or cold draft. | Relocate thermostat if possible, or shield it from environmental factors affecting its sensor. |
9. Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | K902-W |
| Voltage | 120/208/240 volți |
| Configurare cablare | Double Pole, 4-Wire |
| Wattage | 3840 wați (maxim) |
| Interval de temperatură | 41º - 90ºF (5º - 32ºC) |
| Precizia controlului temperaturii | ±1ºF |
| Conectivitate | Wi-Fi (doar 2.4 GHz) |
| Tip de afișare | Large LCD Touchscreen |
| Metoda de control | Touch, Smartphone App |
| Tip de montare | Montare pe perete |
| Dimensiunile produsului | 2 x 4 x 4 inci |
| Greutatea articolului | 11.4 uncii |
| UPC | 093319335109 |
10. Garanție și asistență
KING products are manufactured to high-quality standards. This thermostat is covered by the manufacturer's limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official KING website. For technical support, troubleshooting assistance, or warranty claims, please contact KING customer service.
Informații de contact: Please refer to the official KING website-ul sau ambalajul produsului pentru cele mai recente date de contact pentru asistența clienți.
De asemenea, puteți vizita Magazinul KING pe Amazon pentru mai multe informații despre produs.
