Fostex RM-3DT Active Monitor Speaker User Manual

Introducere

The Fostex RM-3DT is a compact, high-quality active monitor speaker designed for professional audio environments, particularly for rack-mount installations. It features both Dante and balanced analog inputs, making it versatile for various studio and broadcast applications. This manual provides essential information for the proper setup, operation, and maintenance of your RM-3DT unit.

Faţă view of the Fostex RM-3DT Active Monitor Speaker

Figura 1: Față view of the Fostex RM-3DT Active Monitor Speaker, showing the LED meter, headphone jack, and volume knob.

Caracteristici cheie

Accepts both Dante and Balanced Analog Inputs for flexible connectivity.
Outputs either or both of any 2-channel digital signals extracted from the Dante network.
Power-saving design incorporating a digital amplifier and switching power supply.
26-dot LED meter with selectable display modes: VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD.
Adjustable display brightness with four levels.

Ce este în cutie

Upon unpacking your Fostex RM-3DT, please ensure all the following items are present:

Fostex RM-3DT Rack-Mount Active Stereo Monitor Speaker with Dante
Cablu de alimentare
Manual de utilizare (acest document)

Înființat

1. Instalare fizică

The RM-3DT is designed for standard 19-inch rack mounting. Ensure adequate ventilation around the unit to prevent overheating. Secure the unit firmly using appropriate rack screws.

2. Conexiuni

The RM-3DT offers both Dante network connectivity and traditional balanced analog inputs/outputs.

Spate view of the Fostex RM-3DT showing input and output ports

Figure 2: Rear panel of the Fostex RM-3DT, illustrating Dante IN, Analog Input (XLR), and Analog Thru Out (XLR) ports.

Intrare Dante: Connect an Ethernet cable from your Dante network to the "Dante IN" port. The RM-3DT will appear as a device on your Dante Controller software.
Intrare analogică: Use balanced XLR cables to connect your analog audio sources to the "ANALOG INPUT" (L/R) ports.
Analog Thru Out: The "ANALOG THRU OUT" (L/R) ports provide a pass-through of the analog input signals, allowing you to route them to other equipment.

3. Conexiune la alimentare

Connect the supplied power cord to the AC IN receptacle on the rear panel of the RM-3DT and then to a standard AC power outlet. Ensure the power switch is in the "OFF" position before connecting.

Instrucțiuni de operare

1. Pornire/Oprire

To power on the unit, flip the power switch on the rear panel to the "ON" position. To power off, flip the switch to "OFF".

2. Controale panoului frontal

Close-up of the Fostex RM-3DT front panel controls

Figure 3: Close-up of the front panel, highlighting the headphone jack, volume knob, and input/output selection buttons.

Jack PHONES: Connect stereo headphones to this 1/4-inch (6.35mm) jack for private monitoring.
Butonul VOLUM: Adjusts the output level of the built-in speakers and the headphone output.
Buton INPUT: Toggles between Dante and Analog input sources. The selected input will be indicated by an LED.
OUTPUT Button: Selects whether the monitor outputs the Dante signal, Analog signal, or a mix of both.

3. LED Meter Display

The 26-dot LED meter provides visual feedback on audio levels. You can configure its display mode and brightness using the DIP switches on the rear panel.

Moduri de afișare:
- VU: Standard Volume Unit meter.
- VU+PEAK: Displays VU level with peak hold.
- VU+PEAK HOLD: Displays VU level with a longer peak hold.
- PEAK+PEAK HOLD: Displays peak level with peak hold.
Reglarea luminozității: The display brightness can be set to one of four levels via DIP switch settings.

4. Rear Panel DIP Switches

A set of DIP switches on the rear panel allows for advanced configuration of the RM-3DT's behavior. Refer to the labels next to the switches for specific functions.

Close-up of the Fostex RM-3DT rear panel DIP switches

Figure 4: Close-up of the rear panel, showing the DIP switches for various settings like Dimmer, Meter type, Mute, and Peak VU.

DIMMER: Adjusts the brightness of the LED meter.
METRU: Selects the LED meter display mode (VU, VU+PEAK, etc.).
MUT: Activează sau dezactivează funcția de sunet.
PEAK VU: Configures specific peak VU settings.

Consult the detailed diagram on the unit's rear panel for precise DIP switch configurations.

Întreţinere

curatenie: Folosiți o lavetă moale și uscată pentru a curăța exteriorul unității. Nu utilizați agenți de curățare lichizi sau materiale abrazive.
Ventilare: Ensure that the ventilation grilles are not obstructed to allow for proper airflow and prevent overheating.
Depozitare: Dacă depozitați unitatea pentru o perioadă lungă de timp, deconectați-o de la priză și depozitați-o într-un loc răcoros și uscat.

Depanare

Problemă	Cauza posibila	Soluţie
Fără putere	Power cord not connected; Power switch off; Outlet issue.	Verificați conexiunea cablului de alimentare; Asigurați-vă că întrerupătorul este pornit; Testați priza cu un alt dispozitiv.
Fără ieșire audio	Incorrect input selected; Volume too low; Cable issues; Dante network problem.	Press INPUT button to select correct source; Increase VOLUME; Check all audio cables; Verify Dante network configuration in Dante Controller.
LED meter not displaying	Brightness set too low; Meter mode incorrect; No audio signal.	Adjust DIMMER DIP switch; Check METER DIP switch setting; Ensure audio signal is present.
Audio distorsionat	Input level too high; Faulty cable; Speaker damage.	Reduce input signal level; Try different cables; Contact Fostex support if speakers are damaged.

Specificații

Caracteristică	Detaliu
Numele modelului	Rack-Mount Active
Tip difuzor	Monitorizați
Numărul de model al articolului	AMS-RM-3DT
Protocol de conectivitate	Dante (digital audio network) and balanced XLR (analog audio)
Dimensiunea difuzorului	110 milimetri
Diametrul wooferului	3.15 inchi
Mod ieșire audio	Stereo
Putere maximă de ieșire difuzor	30 wați
Sursa de alimentare	Electric cu fir
Dimensiunile produsului	5" D x 20" L x 20" H
Greutatea articolului	10.38 lire sterline
Culoare	Negru
Producător	Fostex
UPC	636827308977

Garanție și suport

The Fostex RM-3DT comes with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Fostex website. For technical support, service, or further inquiries, please contact Fostex customer service through their official channels.

Puteți găsi mai multe informații și resurse de asistență pe Fostex Store on Amazon.

	Fostex RM-3DT Stereo Rack Monitor - User Manual Comprehensive user manual for the Fostex RM-3DT stereo rack monitor, detailing its features, operation, specifications, and safety instructions. Includes information on Dante network integration and analog audio monitoring.
	Manual de utilizare pentru monitorul stereo Fostex RM-3 Rack Manual de utilizare complet pentru monitorul rack stereo Fostex RM-3, care detaliază caracteristicile, specificațiile, funcționarea și instrucțiunile de siguranță pentru monitorizarea semnalelor audio digitale și analogice.
	Fostex 6301DT Manual de utilizare a difuzoarelor active Owner's manual for the Fostex 6301DT active monitor speaker, providing instructions for basic use, safety precautions, part identification, specifications, and optional accessory installation.
	Manual de utilizare Fostex R8: Ghid de înaltă calitate pentru recorder/reproducător cu 8 piste Manual de utilizare complet pentru recorderul/reproducătorul pe 8 piste Fostex R8, care acoperă configurarea, operarea, tehnicile de înregistrare, funcțiile avansate, întreținerea și specificațiile.
	Fostex T50RPmk4g+ Gaming Headset Owner's Manual Official owner's manual for the Fostex T50RPmk4g+ Gaming Headset, detailing features, specifications, and care instructions.
	Căști Fostex TH909 Premium Manual de utilizare Official owner's manual for Fostex TH909 premium headphones. This guide provides detailed specifications, care instructions, and information on the detachable cable system.

Fostex AMS-RM-3DT