Ergotron 45-647-216

Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm User Manual

Model: 45-647-216 | Marcă: Ergotron

1. Introducere

Thank you for choosing the Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm. This monitor arm is designed to provide robust support and flexible positioning for large, curved ultrawide monitors, enhancing your ergonomic setup and reclaiming valuable desk space. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Ce se află în cutie

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

  • HX Desk Monitor Arm with HD Pivot (White)
  • Extensie
  • Birou Clamp
  • Suportul de ghidare
  • Hardware de montare
Ergotron HX Monitor Arm components including arm, extension, desk clamp, suport pentru inele de fixare și diverse șuruburi și unelte.

Figure 2.1: Included components for the Ergotron HX Monitor Arm.

3. Specificațiile produsului

Numărul de model45-647-216
Dimensiunile produsului18.6 x 11.2 x 7.7 inci
Greutatea articolului18.3 lire sterline
MaterialMetal
CuloareAlb
Tip de montareSuport de masă (suport de birou)amp sau Inel de fixare)
Tipul de mișcareArticulând
Dispozitive compatibileMonitors up to 49 inches, 28 to 42 lbs
Compatibilitate VESA75x75mm, 100x100mm
Unghi maxim de înclinare20 de grade
Ridicator11.5 inches (screen rises 17.8 inches from worksurface)
Rotaţie360 de grade
Birou Clamp Grosime0.4 to 2.6 inches (1-6.6 cm)
Grommet Mount Hole Diameter0.4 to 2 inches (1-5.1 cm)
De sus în jos view of the Ergotron HX Monitor Arm showing its full extension and retraction capabilities, with measurements of 6 inches (15.4 cm) for minimum depth and 17.6 inches (44.7 cm) for maximum depth from the mounting point, and a vertical range of 23.6 inches (59.4 cm).

Figure 3.1: Ergotron HX Monitor Arm dimensions and range of motion.

Latura view of the Ergotron HX Monitor Arm with a monitor attached, illustrating an 11.5 inch (29 cm) vertical lift range.

Figure 3.2: Vertical lift range of the monitor arm.

Latura view of the Ergotron HX Monitor Arm showing its horizontal reach, with measurements indicating a minimum depth of 4 inches (10 cm) and a maximum depth of 9.8-12.9 inches (24.9-32.8 cm) from the mounting point to the VESA plate, and a total arm length of 6.7 inches (17 cm) for the lower arm segment and 5.8 inches (15 cm) for the base.

Figure 3.3: Horizontal reach and dimensions of the monitor arm.

4. Configurare și instalare

The Ergotron HX Monitor Arm offers two primary mounting options: a desk clamp for surface edges and a grommet mount for installation through a surface hole. Ensure your desk surface meets the specified thickness requirements for your chosen mounting method.

4.1. Choosing a Mounting Method

  • Birou Clamp: Suitable for desk edges 0.4 to 2.6 inches (1-6.6 cm) thick.
  • Suport cu inel de fixare: Requires a surface hole with a diameter of 0.4 to 2 inches (1-5.1 cm) and a desk thickness of up to 2.8 inches (7.2 cm).
Diagram illustrating two mounting options for the Ergotron HX Monitor Arm: a desk clamp for surfaces 0.4-2.6 inches (1-6.6 cm) thick, and a grommet mount for surfaces up to 2.8 inches (7.2 cm) thick with a hole diameter of 0.4-2 inches (1-5.1 cm).

Figura 4.1: Clangă de birouamp și opțiuni de montare cu inele de fixare cu dimensiuni.

4.2. Monitor Compatibility (VESA)

The monitor arm is compatible with VESA patterns 75x75mm and 100x100mm. It supports monitors up to 49 inches and weighing between 28 to 42 lbs (12.7 to 19.1 kg).

Diagram comparing 3000R and 1000R curved monitors, showing that the 1000R curve is deeper (12 inches / 30.4 cm) than the 3000R curve (6 inches / 15.2 cm), indicating the arm's compatibility with deeply curved ultrawide displays.

Figure 4.2: Compatibility with 1000R curved ultrawide monitors.

4.3. Etape de instalare

For detailed visual instructions, please refer to the official installation video below. The video demonstrates the process for mounting the HX Monitor Arm with HD Heavy-Duty Pivot, including VESA mount installation and tension adjustments.

Video 4.1: How to Install the HX Monitor Arm with HD Heavy-Duty Pivot. This video provides a step-by-step guide for mounting the monitor arm, including attaching the VESA plate to the monitor, securing the arm to the desk, and making initial tension adjustments.

5. Instrucțiuni de utilizare

The Ergotron HX Monitor Arm is designed for fluid and effortless adjustments, allowing you to customize your viewexperiență.

5.1. Reglarea poziției monitorului

The arm offers a full range of motion, including 11.5 inches of lift, allowing the screen to rise up to 17.8 inches from the worksurface. You can also rotate the monitor 360 degrees and tilt it 20 degrees to achieve optimal ergonomic positioning.

Video 5.1: HX Monitor Arm with HD Pivot: Top Features & Benefits. This video highlights the key features and benefits of the monitor arm, demonstrating its smooth movement, tilt, and rotation capabilities for an enhanced user experience.

A person using a large curved ultrawide monitor mounted on an Ergotron HX arm, positioned ergonomically for gaming or work, demonstrating the arm's ability to hold heavy displays in various positions.

Figure 5.1: Ergonomic positioning with the Ergotron HX Monitor Arm.

5.2. Adjusting Arm Tension

If the arm does not hold its position or is too stiff to move, you may need to adjust the tension. Use the provided Allen wrench to turn the tension screw. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm holds the monitor securely in any position with minimal effort.

5.3. Gestionarea cablurilor

The monitor arm features integrated cable management to keep your workspace tidy. Route monitor cables through the designated channels along the arm to maintain a clean and organized setup.

A închide view of the Ergotron HX Monitor Arm's cable management system, showing cables neatly routed along the arm's underside through integrated clips and channels.

Figure 5.2: Integrated cable management system.

6. Întreținere

To ensure the longevity and smooth operation of your Ergotron HX Monitor Arm, perform the following maintenance:

  • curatenie: Wipe down the arm with a soft, damp Evitați utilizarea de produse de curățare abrazive sau solvenți.
  • Verificarea tensiunii: Periodically check the arm tension to ensure it is appropriate for your monitor's weight. Adjust as needed.
  • Elemente de fixare: Ensure all mounting hardware and fasteners are securely tightened. Do not overtighten.

7. Depanare

Dacă întâmpinați probleme cu brațul monitorului, consultați următoarele soluții comune:

  • Arm drifts down or up: Adjust the arm tension using the provided Allen wrench. Increase tension if the arm drifts down, decrease if it springs up.
  • Monitorul se oscilează: Ensure all mounting screws and the desk clamp/grommet mount are securely tightened. Check that the VESA plate is firmly attached to the monitor.
  • Dificultate în mișcarea brațului: If the arm is too stiff, decrease the tension slightly. If it's too loose, increase the tension.

8. Informații importante privind siguranța

  • Nu depășiți capacitatea maximă de greutate de 19.1 kg.
  • Ensure the mounting surface is strong enough to support the combined weight of the arm and monitor.
  • Keep children and pets away from the monitor arm during installation and adjustment.
  • Always use two people when lifting and mounting heavy monitors onto the arm.
  • Citiți și urmați cu atenție toate instrucțiunile.

9. Garanție și asistență

Ergotron products are built to last and set the standard for quality. The Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm comes with a 10 an garanție. For technical support, warranty claims, or further assistance, please visit the official Ergotron website-ul sau contactați serviciul pentru clienți.

Pentru mai multe informații și asistență, vizitați: Ergotron Store on Amazon

Documente conexe - 45-647-216

Preview Ghid de instalare și reglare a pivotului înclinabil Ergotron HX Heavy-Duty
Ghid complet pentru instalarea și reglarea pivotului de înclinare Ergotron HX Heavy-Duty, cu instrucțiuni pas cu pas, măsuri de precauție și informații despre capacitatea de greutate.
Preview Braț pentru monitor de birou Ergotron HX cu pivot VHD - Ghid de instalare și manual de utilizare
Ghid complet de instalare și manual de utilizare pentru brațul monitorului de birou Ergotron HX cu pivot VHD. Aflați cum să instalați, să reglați și să utilizați în siguranță brațul monitorului pentru o ergonomie optimă. Include avertismente de siguranță, specificații și informații de contact pentru asistență.
Preview Braț pentru monitor de birou Ergotron HX - Ghid de instalare și manual de utilizare
Ghid complet de instalare și manual de utilizare pentru brațul monitorului de birou Ergotron HX, care detaliază asamblarea, ajustările, precauțiile de siguranță și specificațiile produsului. Aflați cum să instalați și să utilizați în siguranță brațul monitorului pentru o utilizare ergonomică optimă.
Preview Braț pentru monitor de birou Ergotron HX: Ghid de instalare și utilizare
Un ghid complet pentru instalarea și reglarea brațului pentru monitor de birou Ergotron HX, dotat cu tehnologia Constant Force™. Include o listă de piese, instrucțiuni de asamblare pas cu pas, proceduri de reglare, avertismente de siguranță și informații despre capacitatea de greutate.
Preview Suport de birou Ergotron LX Pro Arm pentru un singur afișaj - Ghid de instalare și ajustare
Acest ghid oferă instrucțiuni complete pentru instalarea, reglarea și utilizarea în siguranță a suportului de birou Ergotron LX Pro Arm Single Display. Acesta acoperă identificarea pieselor, etapele de asamblare, diverse ajustări precum ridicarea, înclinarea, oscilația și frecarea, precum și avertismente importante de siguranță și informații privind capacitatea de greutate.
Preview Braț pentru monitor de birou Ergotron HX - Ghid de instalare și utilizare
Ghid complet pentru instalarea și reglarea brațului pentru monitor de birou Ergotron HX cu suport Top Mount Low Profile C-clampInclude lista de piese, pașii de asamblare, informații de siguranță și specificații.