Introducere
This manual provides detailed instructions for the operation and maintenance of your mooas MC-M3 Digital Mirror LED Alarm Clock. This device features a large LED display, dual alarm functionality, adjustable brightness, temperature and humidity display, and a convenient USB charging port.
Imagine: Pesteview of the mooas MC-M3 Digital Mirror LED Alarm Clock, showcasing its design and available colors (Mint, Dark Gray, White).
Conținutul pachetului
- mooas MC-M3 Digital Mirror LED Alarm Clock
- USB Cable (1.2A)
- Manual de utilizare
Înființat
Alimentarea Dispozitivului
The mooas MC-M3 clock can be powered via a USB cable or AAA batteries. For continuous display of the LED, the clock must be connected to a USB power source.
- USB Power: Connect the provided USB cable to the DC 5V power terminal on the back of the clock and plug the other end into a USB power adapter (not included) or a powered USB port.
- Putere baterie: Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock. When operating on battery power, the LED display will only light up for 10 seconds after a button press to conserve energy.
Image: Rear panel of the clock, highlighting the battery cover, power input, and USB charging port.
Instrucțiuni de operare
Butoane de control pesteview
The clock features intuitive touch sensor buttons on the top panel and a rolling button on the side for brightness control.
Image: Top panel of the clock with touch sensor buttons clearly visible.
Setarea orei și datei
- Țineți apăsat butonul Timp button (clock icon) on the top panel until the time display flashes.
- Utilizați + şi - butoane pentru a regla ora.
- Apăsați tasta Timp button again to move to minute setting, then use + şi - a se ajusta.
- Continuați să apăsați pe Timp button to cycle through year, month, and day settings, adjusting each with + şi -.
- Apăsați tasta Timp button one last time to confirm and exit time/date setting.
Setarea alarmelor (alarme duale)
- Țineți apăsat butonul Alarma button (bell icon) on the top panel until the alarm time display flashes. The alarm indicator (1 or 2) will also flash.
- Utilizați + şi - butoane pentru a regla ora alarmei.
- Apăsați tasta Alarma button again to move to minute setting, then use + şi - a se ajusta.
- Apăsați tasta Alarma button again to set the second alarm, repeating steps 2 and 3.
- Apăsați tasta Alarma button one last time to confirm and exit alarm setting.
Pentru a activa sau dezactiva o alarmă, apăsați scurt butonul Alarma button. The corresponding alarm indicator (1 or 2) will appear or disappear on the display.
Imagine: Detaliată view of the display, indicating time, alarm status, humidity, and temperature.
Funcția de amânare
Când sună o alarmă, apăsați butonul Amână button (Zz icon) on the top panel to activate the snooze function. The alarm will temporarily stop and sound again after a set interval. If no buttons are pressed when the alarm rings, it will automatically sound at the same time the next day.
Reglarea luminozității
Adjust the LED display brightness using the orange rolling button located on the upper right side of the clock. Roll the button up or down to increase or decrease brightness. This allows for fine-tuned adjustment to suit various lighting conditions, including dimming for nighttime use.
Image: The rolling button for detailed brightness control.
12/24 Hour Mode and Temperature Units
To switch between 12-hour and 24-hour time formats, or between Celsius (°C) and Fahrenheit (°F) for temperature display, short press the Modul button (sun/moon icon with Zz) on the top panel. Cycle through the options until your desired format is displayed.
Port de încărcare USB
The clock is equipped with a USB charging port on its back, allowing you to charge compatible devices such as smartphones. The maximum output for this port is 5V 1A.
Image: The clock displaying time, temperature, and humidity, with a smartphone charging from its USB port.
Întreţinere
- Curățați suprafața ceasului cu o cârpă moale și uscată. Evitați substanțele de curățare abrazive sau solvenții.
- Ensure the USB cable and power adapter are in good condition.
- If using batteries, replace them when the display becomes dim or unresponsive (when not connected to USB power).
- Evitați expunerea ceasului la temperaturi extreme, lumina directă a soarelui sau umiditate ridicată.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Display is off or very dim. | Not connected to USB power, or batteries are low/dead. | Connect the clock to a USB power source for continuous display. If using batteries, replace them. Adjust brightness with the rolling button. |
| Alarma nu sună. | Alarma nu este activată sau este setată incorect. | Ensure the alarm indicator (1 or 2) is visible on the display. Re-check alarm time settings. |
| Ora/Data este incorectă. | Time/Date was not set or reset due to power interruption. | Follow the "Setting Time and Date" instructions to reset. |
| Portul de încărcare USB nu funcționează. | Device not properly connected or power source insufficient. | Ensure the clock is connected to a stable USB power source. Check the charging cable of the device you are trying to charge. |
Specificații
| Marca | mooas |
| Numărul de model | MC-M3 |
| Tip de afișare | LED digital |
| Sursa de alimentare | Corded Electric (USB DC 5V) / 3 x AAA Batteries (not included) |
| Ieșire USB | 5V 1A (Max) |
| Dimensiunile produsului | 8"l x 4"Î (20.32 cm lățime x 10.16 cm înălțime) |
| Greutatea articolului | 6 uncii (170.1 grame) |
| Material | Acrilonitril Butadien Stiren (ABS) |
| Caracteristici speciale | Dual Alarm, Snooze, Brightness Adjustment, 12/24H Mode, Temperature (°C/°F) & Humidity Display, Mirror Display |
Image: The mooas MC-M3 clock in its three available colors, illustrating its compact size.
Garanție și suport
Specific warranty information is not provided in the product details. For support or warranty inquiries, please contact mooas customer service through their official website-ul sau distribuitorul de unde a fost achiziționat produsul.
