1. Introducere
The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view a componentelor interne.
Imaginea 1.1: Partea frontală view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.
2. Conținutul pachetului
Vă rugăm să verificați dacă toate articolele sunt prezente în colet:
- Sharkoon RGB SLIDER WT PC Case
- 1x 120mm Rear Fan (pre-installed)
- Accessory Box (containing screws, cable ties, and this manual)
3. Specificații
| Caracteristică | Detaliu |
|---|---|
| Dimensiuni (L x l x H) | 40 x 19 x 45.6 cm |
| Greutate | 6 kg |
| Tipul cazului | Turnul Midi |
| Material panou lateral | Sticla securizata |
| Metoda de răcire | Răcire cu aer |
| Porturi I / O frontale | 2x USB 3.0, 1x USB 2.0, Audio In/Out |
| Drive Bays | 2x 3.5" HDD, 5x 2.5" SSD (2 shared with 3.5") |
| Lungimea maximă a GPU | 335mm (without front fans) |
| Înălțimea maximă a răcitorului CPU | 157mm |
| Lungimea maximă a PSU | 175mm |
| Ventilatoare preinstalate | 1x 120mm Rear Fan |
| Suport ventilator (față) | 3x 120 mm |
| Suport ventilator (sus) | 2x 120mm or 2x 140mm |
| Suport ventilator (spate) | 1x 120 mm |
Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.
4. Configurare și instalare
4.1. Pregătire
Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.
4.2. Instalarea plăcii de bază
- Install the I/O shield into the designated slot at the rear of the case.
- Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
- Fixați placa de bază folosind șuruburile furnizate.
Imaginea 4.1: Interior view of the PC case, showing the motherboard mounting area and pre-installed rear fan.
4.3. Instalarea unității de alimentare (PSU)
- Locate the PSU tunnel at the bottom rear of the case.
- Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
- Fixați sursa de alimentare cu șuruburi din spatele carcasei.
4.4. Instalarea dispozitivului de stocare
Carcasa acceptă HDD-uri de 3.5" și SSD-uri de 2.5".
- HDD-uri de 3.5": Install into the drive cage located within the PSU tunnel.
- SSD-uri de 2.5": Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.
Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.
4.5. Expansion Card Installation (e.g., GPU)
- Scoateți capacele sloturilor PCIe necesare din spatele carcasei.
- Insert the expansion card into the corresponding PCIe slot on the motherboard.
- Secure the card with screws.
4.6. Fan Installation (Optional)
Additional fans can be installed at the front and top of the case.
- Ventilatoare frontale: Remove the front panel to access the mounting points for up to three 120mm fans.
- Fani de top: Mount up to two 120mm or 140mm fans to the top panel.
4.7. Gestionarea cablurilor
Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.
5. Instrucțiuni de utilizare
5.1. Pornire
After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.
Imaginea 5.1: Sus view of the case, detailing the front I/O panel with USB ports and audio jacks.
5.2. Controlul iluminării RGB
The front RGB LED strip can be controlled in two ways:
- Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
- Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).
5.3. Porturi de pe panoul frontal
The front I/O panel provides convenient access to:
- 2x USB 3.0 ports for high-speed data transfer.
- 1x USB 2.0 port for general peripherals.
- Audio In (microphone) and Audio Out (headphone) jacks.
6. Întreținere
6.1. Curatenie
- Exterior: Ștergeți suprafețele exterioare cu un material moale, damp pânză. Evitați curățarea abrazivă.
- Filtre de praf: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
- Interior: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.
6.2. Fluxul de aer
Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.
7. Depanare
7.1. Sistemul nu pornește
- Verify that the power cable is securely connected to both the PSU and the wall outlet.
- Asigurați-vă că întrerupătorul de alimentare al sursei de alimentare este în poziția „ON”.
- Verificați dacă cablul butonului de alimentare de pe panoul frontal este conectat corect la conectorul panoului frontal al plăcii de bază.
- Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.
7.2. Fans Not Spinning
- Verificați conexiunile de alimentare ale ventilatorului la placa de bază sau la controlerul ventilatorului.
- Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.
7.3. Iluminarea RGB nu funcționează
- If using the built-in controller, press the RGB button to cycle modes.
- If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
- Verify that the motherboard's RGB software is installed and configured correctly.
7.4. Front Panel USB/Audio Ports Not Functioning
- Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
- Asigurați-vă că sunt instalate driverele plăcii de bază.
8. Garanție și asistență
Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.
For further assistance, please visit the official Sharkoon website: www.sharkoon.com
