Introducere
The SHARP Digital Alarm Clock with AccuSet is designed for effortless timekeeping. Featuring automatic time setting, a clear LED display, and user-friendly controls, this clock is ideal for any bedroom. Its AccuSet technology ensures the time is always accurate, eliminating the need for manual adjustments, making it perfect for seniors, children, or anyone seeking a hassle-free alarm clock solution.
Figura 1: Față view of the SHARP Digital Alarm Clock with green LED display.
Caracteristici cheie
- Setare automată a orei AccuSet: The clock is pre-programmed to automatically set the correct time, removing the need for manual adjustments. Simply select your time zone.
- Reglare rapidă a orei de vară (DST): A convenient switch allows for easy adjustment for Daylight Savings Time (+1 hour) or Standard Time (-1 hour).
- Controlul variatorului de intensitate înaltă/joasă: Adjust the brightness of the LED display to your preference, ensuring comfortable viewzi sau noapte.
- Baterie de rezerva: A pre-installed CR2032 button cell battery provides backup for time settings during power outages, ensuring continuous accuracy.
- Selectarea fusului orar: Easily select your local time zone from the options provided at the bottom of the clock.
Figure 2: Diagram illustrating the key features and functionalities of the alarm clock.
Ghid de instalare
- Despachetarea: Carefully remove the alarm clock from its packaging.
- Battery Installation (Pre-installed): The CR2032 button cell battery for backup is pre-installed in a screw-secured cabinet at the bottom of the clock. This battery is designed to last for several years. No immediate action is required for initial setup.
- Selectarea fusului orar: Before plugging in the clock, locate the time zone selection switch at the bottom of the unit. Select your correct time zone (e.g., EST, CST, MST, PST). The default time zone is Eastern Standard Time.
- Conexiune de alimentare: Plug the clock into an approved electrical source. The AccuSet feature will automatically program the correct time based on your selected time zone.
- Daylight Savings Time (DST) Adjustment: If applicable, slide the DST switch at the bottom of the clock to "ON" to add one hour (+1 hr) for Daylight Savings Time. For Standard Time, slide the switch to "OFF" to subtract one hour (-1 hr).
Figure 3: Top panel controls for setting time, alarm, and adjusting display.
Instrucțiuni de operare
Setarea alarmei
- Apăsați tasta ALARMA button once. The alarm time will appear on the display.
- În timp ce este afișată ora alarmei, apăsați tasta ORĂ pentru a regla ora alarmei.
- Apăsați tasta MINUT pentru a regla minutul de alarmă.
- Pentru a activa sau dezactiva alarma, apăsați butonul ALARM ON / OFF button. An alarm indicator light (usually a small LED) will illuminate when the alarm is active.
- To return to the current time display, press the TIMP button or wait a few seconds for it to revert automatically.
Utilizarea funcției de amânare
Când sună alarma, apăsați butonul mare PUI DE SOMN button located on the top of the clock. This will temporarily silence the alarm for a set period (typically 9 minutes), allowing for extra rest. The alarm will sound again after the snooze period ends.
Adjusting Display Brightness (Dimmer Control)
The clock features a High/Low dimmer control to adjust the display brightness. Locate the REGLATOR HI/LO button on the top panel. Press this button to toggle between high and low brightness settings to suit your environment and preference.
Figure 4: Illustration of the High & Low Display Dimmer Control.
Întreţinere
- curatenie: To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Înlocuire baterie: The CR2032 backup battery is designed for long-term use. If the clock loses time during a power outage after several years, it may be time to replace the battery. This is located in a screw-secured compartment at the bottom of the clock.
- Plasare: Place the clock on a stable, flat surface. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Clock does not display time after plugging in. | Not connected to power, or power outlet is not active. | Asigurați-vă că cablul de alimentare este conectat corect la o priză electrică funcțională. |
| Timpul este incorect. | Incorrect time zone selected, or DST switch is set incorrectly. | Verify the time zone switch at the bottom of the clock is set to your local zone. Check the DST switch position. |
| Alarma nu sună. | Alarm is not activated, or alarm volume is too low (if adjustable). | Ensure the alarm is turned ON using the ALARM ON/OFF button. Check for an alarm indicator light. |
| Afișajul este prea luminos sau prea slab iluminat. | Setarea variatorului de intensitate trebuie ajustată. | Apăsați butonul DIMMER HI/LO pentru a parcurge setările de luminozitate. |
| Clock loses time during power outage. | Backup battery is depleted. | Replace the CR2032 backup battery located in the compartment at the bottom of the clock. |
Specificații
| Caracteristică | Detaliu |
|---|---|
| Marca | Ascuțit |
| Numărul de model | OZJONG |
| Culoare | Black - Green Led |
| Tip de afișare | Digital |
| Caracteristici speciale | Alarm, Daylight Saving, Auto Dimmable |
| Dimensiunile produsului | 5.5 cm lățime x 2.6 cm înălțime |
| Sursa de alimentare | Electric cu fir, alimentat cu baterie |
| Baterie de rezervă | CR2032 (preinstalat) |
| Material | Plastic |
| Greutatea articolului | 9.9 uncii |
| Tip de montare | Blat de masă |
| UPC | 049353006079 |
Figura 5: Dimensiunile produsului pentru referință ușoară.
Garanție și suport
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Sharp website-ul. Păstrați chitanța de achiziție pentru cererile de garanție.
