1. Introducere
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your POOLEX PC-QBC070 Q-Line 7 Full Inverter Pool Heat Pump. Please read this manual thoroughly before installation and use, and retain it for future reference.
The POOLEX Q-Line 7 heat pump is designed for heating swimming pools with a volume of 20 to 50 cubic meters. It incorporates Full Inverter technology, vertical air discharge, and integrated Wi-Fi for enhanced control and energy efficiency.
2. Informații de siguranță
- Asigurați-vă că toate conexiunile electrice sunt efectuate de către un electrician calificat și că respectați reglementările locale.
- Do not operate the heat pump if any part is damaged or if it is not functioning correctly.
- Keep children and unauthorized personnel away from the unit during operation.
- Ensure proper ventilation around the unit. Do not obstruct the air intake or discharge areas.
- Deconectați întotdeauna alimentarea cu energie electrică înainte de a efectua orice operațiune de întreținere sau service.
- Acest aparat nu este destinat utilizării de către persoane (inclusiv copii) cu capacități fizice, senzoriale sau mentale reduse sau cu lipsă de experiență și cunoștințe, cu excepția cazului în care acestea au fost supravegheate sau instruite cu privire la utilizarea aparatului de către o persoană responsabilă pentru siguranța lor.
3. Conținutul pachetului
La despachetare, verificați dacă toate componentele sunt prezente și nedeteriorate:
- POOLEX PC-QBC070 Q-Line 7 Full Inverter Pool Heat Pump
- Manual de utilizare
- Connection accessories (e.g., water pipe connectors, seals)
- Furtun de scurgere
4. Produs terminatview
The POOLEX PC-QBC070 Q-Line 7 heat pump features a compact design with vertical air discharge, optimizing space utilization. Its Full Inverter technology precisely controls the compressor and fan speed, leading to significant energy savings. The unit includes an integrated Wi-Fi module for remote control via a smartphone application and front-facing LED indicators for operational status.
Figura 4.1: Față și laterală view of the POOLEX PC-QBC070 Q-Line 7 Pool Heat Pump.
Figura 4.2: Prim-plan view of the control panel and LED indicators on the POOLEX PC-QBC070.
Figure 4.3: Diagram illustrating the vertical airflow pattern of the heat pump, with air intake (red arrows) and vertical discharge (blue arrows).
Figure 4.4: Dimensions of the POOLEX PC-QBC070 heat pump, showing its compact cubic form (36.04 cm x 36.04 cm x 36.04 cm).
5. Configurare și instalare
5.1 Plasarea
- Due to its vertical air discharge, the Q-Line 7 can be installed in more confined technical spaces compared to traditional horizontal discharge units.
- Ensure there is adequate clearance around the unit for proper airflow and maintenance access. Refer to the manufacturer's recommended clearances.
- Install the unit on a stable, level surface capable of supporting its weight (43 kg).
5.2 Conexiuni la apă
- Connect the heat pump to your pool's filtration system after the filter and before any chemical injection points.
- Ensure all connections are watertight using appropriate seals and clamps.
- The heat pump requires a continuous flow of water from the pool pump to operate.
5.3 Conexiuni electrice
- The unit operates on 230 Volts. Ensure the power supply matches the unit's requirements.
- A dedicated circuit with appropriate overcurrent protection (circuit breaker) is recommended.
- All electrical wiring must comply with national and local electrical codes.
5.4 Configurare Wi-Fi
- Download the dedicated POOLEX smartphone application from your device's app store.
- Follow the in-app instructions to connect your heat pump to your home Wi-Fi network. This typically involves putting the unit into pairing mode and entering your network credentials.
6. Instrucțiuni de utilizare
6.1 Pornire/Oprire
- Ensure the pool pump is running and water is flowing through the heat pump before powering on.
- Apăsați butonul de alimentare de pe panoul de control pentru a porni sau opri unitatea.
6.2 Setarea temperaturii dorite
- Use the up/down arrows on the control panel to adjust the target water temperature.
- The heat pump will automatically operate to reach and maintain the set temperature.
6.3 Indicatori LED
The front-facing LED indicators provide visual feedback on the unit's status:
- Different color codes indicate whether the target temperature has been reached, if the unit is heating, or if there is an operational status change. Refer to the specific color code legend in the full manual for detailed interpretation.
6.4 Smartphone Control (Wi-Fi)
- Once connected via Wi-Fi, use the POOLEX application on your smartphone to monitor and control the heat pump remotely.
- Functions typically include turning the unit on/off, adjusting temperature, setting timers, and viewing operational data.
7. Întreținere
7.1 Curățare regulată
- Periodically clean the exterior of the unit to remove dust and debris.
- Ensure the air intake and discharge grilles are free from obstructions (leaves, dirt, etc.) to maintain optimal airflow.
- Clean the evaporator coils if they become dirty, using a soft brush or compressed air.
7.2 Water System Maintenance
- Regularly check water connections for leaks.
- Ensure the pool's water chemistry is balanced to prevent corrosion or scaling within the heat pump.
7.3 Iernare
- Before freezing temperatures, drain all water from the heat pump to prevent damage from ice expansion.
- Disconnect the water lines and open any drain plugs.
- Cover the unit with a protective, breathable cover to shield it from harsh weather conditions.
8. Depanare
This section provides solutions to common issues. For more complex problems, contact qualified service personnel.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Heat pump not turning on | No power supply; Circuit breaker tripped; Unit switch off | Check power connection; Reset circuit breaker; Turn unit on via control panel |
| Încălzire insuficientă | Low water flow; Dirty evaporator coils; Incorrect temperature setting; Ambient temperature too low | Check pool pump and filter; Clean coils; Adjust temperature; Heat pump efficiency decreases in very cold weather |
| Unitatea face zgomot neobișnuit | Componente slăbite; Obstrucționarea ventilatorului; Problemă cu compresorul | Inspect for loose parts; Clear fan area; Contact service if noise persists |
| Probleme de conexiune Wi-Fi | Incorrect network credentials; Router too far; Signal interference | Re-enter Wi-Fi details; Move router closer or use extender; Check for interference sources |
9. Specificații
- Model: PC-QBC070
- Marca: POOLEX
- Dimensiuni (L x l x H): 36.04 x 36.04 x 36.04 cm
- Greutate: 43 kg
- Material: Stainless Steel (internal components), ABS (casing)
- Voltage: 230 volți
- Recommended Pool Volume: 20 m3 până la 50 m3
- Tehnologie: Full Inverter, Vertical Air Discharge
- Conectivitate: Integrated Wi-Fi Module
10. Garanție și asistență
The POOLEX PC-QBC070 Q-Line 7 Full Inverter Pool Heat Pump comes with a 2 an garanție de la data achiziției, acoperind defectele de fabricație. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.
For technical support, service, or warranty inquiries, please contact your authorized POOLEX dealer or the customer service department. Provide your model number (PC-QBC070) and a detailed description of the issue when seeking assistance.
