RAINPOINT Automatic Watering System for Potted Plants

1. Produs terminatview

The RAINPOINT Automatic Watering System is designed to provide efficient and automated irrigation for your potted plants, both indoors and outdoors. This system supports watering for up to 10 flowerpots, offering flexible scheduling options including watering duration from 6 seconds to 30 minutes and watering frequency from 1 day to 7 days. It also features a delay watering mode for 1 to 24 hours, ideal for situations like rain or when you need to pause the schedule. The system is powered by either 4 AA batteries (not included) or a USB charging port (cable included), ensuring continuous operation even during power outages.

The RAINPOINT Automatic Watering System in action, demonstrating its ability to water multiple potted plants.

The system is versatile and can be used in various environments, including indoor spaces, outdoor patios, and greenhouses.

2. Ce se află în cutie

Vă rugăm să verificați conținutul coletului în raport cu lista de mai jos:

An illustration of the components included in the RAINPOINT Automatic Watering System kit.

• Gift Package * 1
• USB Cable (1.2M micro USB) * 1
• 10m (32.8ft) Tubing * 1
• Tubing End Caps * 3
• Water Pump * 1
• Filtru * 1
• Supapă de sens * 1
• T Barb Fitting * 10
• Straight Barb Fitting * 3
• Micro Drip Emitters * 10

3. Configurare și instalare

Follow these steps to set up your RAINPOINT Automatic Watering System:

A visual guide detailing the installation process from measuring tubes to inserting drippers.

1. Measure and Cut Tubing: Determine the required length of tubing for each plant and cut it using scissors. Ensure the tubing is long enough to reach from the pump to each plant's pot.
2. Attach Fittings: Connect the T-barb fittings and straight barb fittings to create your desired irrigation layout. These fittings allow you to branch off the main tube to individual plants.
3. Install Micro Drip Emitters: Attach a micro drip emitter to the end of each tube segment that will go into a plant pot.
4. Instalați filtrul: Insert the provided filter at the end of the inlet pipe, which will be submerged in your water reservoir. This prevents debris from entering the pump.
5. Instalați supapa de sens invers: Install the check valve at the outlet pipe near the pump. This prevents water from flowing back and helps prevent siphoning.
6. Hook the Device to the Tank: Use the flexible clip to securely attach the main unit to the edge of your water reservoir (e.g., a bucket or container). Ensure the pump's inlet is submerged in the water.
7. Insert Drippers into Soil: Place the micro drip emitters into the soil of each potted plant, ensuring they are close to the plant's roots for efficient watering.

Alimentarea dispozitivului:

The system offers two power options:

• Încărcare USB: Connect the included 1.2M micro USB cable to the device and a USB power adapter (not included).
• Încărcarea bateriei: Insert 4 AA batteries (not included) into the battery compartment. If USB power fails, the system will automatically switch to battery power.

The system can be powered via USB or 4 AA batteries, providing flexible power options.

Instrucțiuni importante privind plasarea:

Visual instructions for optimal pump and plant height relative to the water source.

• Asigurați-vă că pompa este superior than the water container to prevent siphoning issues.
• Plants can be higher than the pump, but the maximum height difference should not exceed 2.5 meters.

4. Instrucțiuni de utilizare

The RAINPOINT Automatic Watering System allows for precise control over your plant's watering schedule.

The system's display clearly shows options for setting watering duration and frequency.

Setting Watering Schedule:

• Watering Duration (HOW LONG): Set the amount of time the pump will run for each watering cycle. This can be adjusted from 6 seconds to 30 minutes.
• Watering Frequency (HOW OFTEN): Set how often the watering cycles will occur. This can be adjusted from 1 hour to 7 days.
• Timp de întârziere: If needed, you can delay the next watering schedule for 1 to 24 hours. This is useful during rainy periods or when plants do not require immediate watering.

Use the control buttons on the device to navigate through the settings and adjust the values. Refer to the display for current settings and battery status.

Detaliat view of the control panel, including the LCD screen, OK button, UP/DOWN buttons, Micro USB Port, Inlet Port, and Outlet Port.

5. Întreținere

Regular maintenance ensures the longevity and optimal performance of your watering system.

• Curățarea filtrului: Periodically check and clean the water filter to prevent impurities from blocking the system and ensure consistent water flow.
• Inspecția tuburilor: Inspect the tubing for any kinks, blockages, or damage. The system includes black tubing which helps prevent moss growth compared to clear tubing.

A visual comparison highlighting the benefit of black tubing in preventing moss growth.

The low battery indicator on the device's display, showing when power is running low.

6. Depanare

If you encounter issues with your RAINPOINT Automatic Watering System, refer to the following common problems and solutions:

• Fără flux de apă:
  • Check if the water pump is properly submerged in the water reservoir.
  • Ensure the filter is not clogged. Clean if necessary.
  • Verify that the tubing is not kinked or blocked.
  • Check the power source (batteries or USB) and ensure the device is powered on.
• Distribuție inegală a apei:
  • Asigurați-vă că toate conexiunile sunt sigure și că nu există scurgeri.
  • Adjust the placement of micro drip emitters to ensure even distribution to all plants.
  • For plants at different heights or distances, consider adjusting the flow rate at individual drippers if your setup allows, or ensure the main pump is positioned correctly relative to the plants (refer to placement guidelines in Section 3).
• Siphoning (Water continues to flow after pump stops):
  • Ensure the pump unit is positioned superior than the water reservoir. This is crucial to prevent gravity-induced siphoning.
  • Verify that the check valve is correctly installed at the outlet pipe near the pump. The check valve is designed to prevent backflow.
• Dispozitivul nu răspunde:
  • Replace batteries or ensure the USB power connection is stable.
  • If the device has been exposed to extreme temperatures, allow it to return to normal operating temperature.

7. Specificații

8. Suport

For any questions, technical assistance, or support regarding your RAINPOINT Automatic Watering System, please contact RAINPOINT customer service. We aim to provide an answer within 24 hours.

• Asistență prin e-mail
• Chat live
• Local Business Contact

RAINPOINT: Save Water, Save Time.