Manual de utilizare a pompei de efluenți Everbilt HDEFR50W 1/2 CP cu comutator conectat

Introducere

This manual provides essential instructions for the safe installation, operation, and maintenance of your Everbilt HDEFR50W 1/2 HP Cast Iron Effluent Pump with Tethered Switch. Please read this manual thoroughly before installation and operation to ensure proper function and to prevent injury or damage. Keep this manual for future reference.

The Everbilt HDEFR50W is designed for efficient removal of effluent water, capable of handling 1/2 inch solids. Its robust cast iron construction and PSC motor ensure durability and energy efficiency.

Informații importante privind siguranța

AVERTIZARE: Nerespectarea acestor instrucțiuni de siguranță poate duce la electrocutare, incendiu, vătămări corporale grave sau deces.

• Deconectați întotdeauna alimentarea pompei înainte de a efectua orice operațiune de întreținere sau service.
• Asigurați-vă că pompa este împământată corespunzător, conform codurilor electrice locale.
• Nu utilizați pompa cu un cablu sau un ștecher deteriorat.
• Nu utilizați această pompă pentru lichide inflamabile sau corozive.
• Keep hands and feet clear of the pump inlet and outlet during operation.
• This pump is equipped with thermal overload protection. If the pump overheats, it will automatically shut off and restart once it cools down. Investigate the cause of overheating if this occurs frequently.
• Installation should be performed by a qualified professional if you are unsure of any steps.

Produs terminatview

Image: Everbilt HDEFR50W 1/2 HP Effluent Pump. This image displays the black cast iron pump unit with its integrated tethered float switch and power cord. The Everbilt logo is visible on the pump body.

Caracteristici cheie:

• Heavy-duty cast iron construction: Ensures durability and long service life.
• Piggyback tethered float switch: Allows for automatic or manual operation, providing flexibility in control.
• High pumping capacity: Pumps up to 3180 Gallons Per Hour (GPH) at a 10 ft. lift.
• Protectie la suprasarcina termica: Safeguards the motor from overheating, extending pump life.
• Effluent handling: Engineered to pass solids up to 1/2 inch in diameter.

Specificații

Configurare și instalare

Proper installation is crucial for the efficient and safe operation of your pump. Consult a qualified electrician or plumber if you are uncertain about any steps.

Pașii de instalare:

1. Plasare: Position the pump on a solid, level surface in the lowest part of the basin or pit. Ensure it is not resting directly on dirt or gravel, which could clog the intake.
2. Conducta de refulare: Connect a discharge pipe (typically 1-1/2 inch or 2 inch NPT) to the pump's outlet. Use appropriate fittings and ensure all connections are watertight. A check valve should be installed in the discharge line to prevent backflow.
3. Conexiune electrică: Connect the pump to a dedicated, properly grounded electrical outlet. Ensure the voltage matches the pump's requirements (typically 120V AC). Do not use extension cords.
4. Reglarea comutatorului cu flotor: The tethered float switch controls the pump's automatic operation. Adjust the tether length to set the desired ON and OFF levels. Ensure the float can move freely without obstruction within the basin. The float should not touch the sides of the pit or other pipes.
5. Testare: După instalare, umpleți basin with water to test the pump's operation. Observe that the pump turns on when the water level rises to the ON point and turns off when the water level drops to the OFF point.

Instrucțiuni de operare

The Everbilt HDEFR50W pump is designed for automatic operation via its tethered float switch. It can also be operated manually.

Funcționare automată:

When the pump is plugged into a properly grounded outlet and the float switch is set for automatic mode (piggyback plug connected), the pump will activate when the water level rises, lifting the float switch. It will continue to pump until the water level drops, causing the float switch to fall and deactivate the pump.

Operare manuala:

To operate the pump manually, disconnect the piggyback plug from the wall outlet, then plug the pump's main power cord directly into the wall outlet. The pump will run continuously. Always monitor the pump during manual operation to prevent dry running, which can damage the motor. To stop manual operation, unplug the pump.

Întreţinere

Întreținerea regulată asigură o performanță optimă și prelungește durata de viață a pompei. Deconectați întotdeauna alimentarea cu energie electrică înainte de a efectua orice operațiune de întreținere.

• Inspect Float Switch: Periodically check that the float switch moves freely and is not obstructed by debris or the basin ziduri.
• Clean Intake Screen: Remove any debris (leaves, sediment, etc.) from the pump's intake screen to prevent clogging and ensure efficient water flow.
• Verificați dacă există blocaje: If the pump's performance decreases, check the impeller area for blockages. Disconnect power, remove the pump, and carefully inspect the impeller.
• Verificați cablul de alimentare: Examine the power cord for any signs of damage, fraying, or cuts. Replace if damaged.
• Iernare (dacă este cazul): Dacă pompa se află într-o zonă cu temperaturi de îngheț și nu va fi utilizată, scoateți-o din priză.asin, clean it, and store it in a warm, dry place to prevent freezing damage.

Depanare

Before attempting any repairs, ensure the pump is disconnected from the power source.

Garanție și suport

For warranty information or technical support, please refer to the documentation included with your purchase or contact Everbilt customer service directly. Keep your purchase receipt as proof of purchase.

Pentru asistență suplimentară, vizitați Everbilt official website-ul or contact their support line.