Paulmann 94453 Capea LED Lampă de perete pentru exterior, Lamp cu manualul de instrucțiuni al detectorului de mișcare

Introducere

Thank you for choosing the Paulmann 94453 Capea LED Outdoor Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image: The Paulmann Capea LED Outdoor Wall Lamp, showing the product itself and its retail packaging. The lamp is black, with a conical shade and an integrated motion sensor at the base.

Instrucțiuni importante de siguranță

• Siguranta electrica: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or repair.
• Utilizare în exterior: This product is designed for outdoor use (IP44 rated). Ensure all connections are properly sealed to prevent water ingress.
• Montare: Mount the fixture securely on a stable surface. Do not install on flammable surfaces.
• Sursa de lumina: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the light source compartment.
• Temperatură: Nu acoperiți lamp with insulating material. Ensure adequate air circulation around the fixture.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• 1x Paulmann Capea LED Outdoor Wall Lamp (Modelul 94453)
• Instructiuni de asamblare
• Elemente de montare (șuruburi, dibluri) - (Assumed, as typical for wall lamps)

Specificatii tehnice

Image: Technical drawing showing the dimensions of the Paulmann Capea LED Outdoor Wall Lamp: 153mm width, 165mm height, and 96mm depth.

Ghid de instalare

Înainte de a începe: Ensure the main power supply to the installation area is switched off at the circuit breaker. Use appropriate tools and safety equipment.

1. Pregătiți locația de montare: Choose a suitable wall location for the lamp, ensuring it is a stable surface and allows for proper wiring. Mark the drilling points for the mounting bracket.
2. Găuri: Dați găuri în punctele marcate și introduceți dibluri de perete corespunzătoare (dacă este necesar).
3. Suport de montare: Fixați suportul de montare pe perete folosind șuruburile furnizate.
4. Cablaj: Connect the electrical wires from your mains supply to the terminal block inside the lamp fixture. Ensure correct polarity (Live, Neutral, Earth) and secure all connections tightly. Refer to local electrical codes.
5. Atașați Lamp: Atașați cu grijă l-ulamp fixture to the mounting bracket, ensuring no wires are pinched. Secure the lamp pe loc.
6. Restabiliți puterea: După finalizarea instalării și asigurarea tuturor conexiunilor, restabiliți alimentarea cu energie electrică la întrerupătorul principal.

Image: The Paulmann Capea LED Outdoor Wall Lamp shown with its packaging, which illustrates basic installation steps and features like the motion sensor and IP44 rating.

Instrucțiuni de operare

The Paulmann Capea LED Outdoor Wall Lamp features an integrated motion sensor for automatic operation.

Setări senzor de mișcare

The motion sensor can be adjusted to suit your specific needs. Typically, there are controls for:

• Unghi de detectare: Approximately 90 degrees.
• Interval de detectare: 2-8 de metri.
• Sensibilitate la lumină (LUX): Determines the ambient light level at which the sensor activates the lamp.
  • ON < 20 Lux: Lamp will turn on when motion is detected and the ambient light is below 20 Lux (dark conditions).
  • OFF > 20 Lux: Lamp will remain off when the ambient light is above 20 Lux (daylight conditions).
• Ora ON: Sets the duration the light remains on after motion is detected. Adjustable from approximately 5 seconds to 5 minutes.

Adjust these settings using the small dials or switches located on the motion sensor unit, usually found at the bottom of the lamp. Use a small screwdriver if necessary.

Image: A diagram illustrating the motion sensor's detection angle (90 degrees), range (2-8 meters), and light sensitivity settings (On < 20 Lux / Off > 20 Lux), along with the adjustable time duration (5 seconds - 5 minutes).

Imagine: Un prim-plan view of the integrated motion sensor located at the base of the Paulmann Capea LED Outdoor Wall Lamp, showing its spherical lens.

Întreţinere

• curatenie: Deconectați alimentarea înainte de curățare. Ștergețiamp cu un moale, damp Nu utilizați substanțe de curățare abrazive sau solvenți, deoarece acestea pot deteriora finisajul sau componentele electrice.
• Sursa de lumina: The LED light source is integrated and designed for long-term use (30,000 hours). It is not user-replaceable. If the LED fails, the entire fixture typically needs replacement.
• Inspecţie: Inspectați periodic lamp for any signs of damage, loose connections, or wear. Address any issues promptly.

Depanare

Garanție și asistență pentru clienți

Paulmann products are manufactured to high quality standards. This product comes with a 5-year guarantee, as indicated on the packaging. For warranty claims, technical assistance, or further inquiries, please contact your retailer or Paulmann customer support directly. Keep your proof of purchase for warranty purposes.

For more information, visit the official Paulmann website: www.paulmann.com

Informații privind eliminarea

This product contains electronic components and an integrated LED light source. Do not dispose of it with general household waste. Please take it to a designated collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.