Tub Bluetooth Pyle PVTA80 AmpManual de utilizare al receptorului lifier

1. Introducere

This manual provides detailed instructions for the Pyle PVTA80 Bluetooth Tube Amplifier Receiver. This 500W peak power stereo amplifier is designed for home audio systems, featuring vacuum tube technology for enhanced sound quality, Bluetooth wireless streaming, USB playback, and multiple audio inputs. Please read this manual thoroughly before operating the device to ensure proper use and longevity.

2. Caracteristici cheie

• 4 Putere tub de vid Ampmai în viață: Delivers 500W peak power with vacuum tubes, known for producing a warm and rich audio experience.
• Streaming wireless Bluetooth: Seamlessly connects to smartphones, tablets, laptops, and other Bluetooth-enabled devices for audio playback. Features Bluetooth Version 4.2 with a wireless range of 40+ feet.
• Built-in USB Playback: Supports MP3 audio playback directly from a USB drive.
• Intrări audio multiple: Includes two CD/DVD (L/R) RCA inputs for connecting external audio sources.
• Ieșire subwoofer: Dedicated output for connecting an external subwoofer.
• Ieșiri difuzoare: Two speaker outputs supporting 4-8 ohm speakers.
• Controale din panoul superior: Easy access to input selection, play/pause, previous/next song, and master volume.
• Display LED: Blue LED screen provides media playback information.
• Ventilator de răcire integrat: Prevents overheating during extended operation.
• Telecomanda: Telecomandă complet funcțională pentru o utilizare convenabilă.

Image: The Pyle PVTA80 amplifier showcasing its four vacuum tubes, positioned between two bookshelf speakers, highlighting its audio capabilities.

3. Ce se află în cutie

• Tub Bluetooth Pyle PVTA80 AmpReceptor mai viu
• Cablu de alimentare
• Remote Control (requires 2x 'AAA' batteries, not included)

Image: The Pyle PVTA80 amplifier shown alongside its remote control, with key dimensions (length, width, height) indicated.

4. Produs terminatview

4.1 Controale panoului frontal

Imagine: față view of the Pyle PVTA80 amplifier, displaying the vacuum tubes, control knobs, LED screen, and the included remote control.

• Comutator pornire / oprire: Comută ampputerea lifierului.
• Selectare intrare: Cycles through available audio inputs (Bluetooth, USB, CD/DVD).
• Cititor USB: Port for USB flash drives for MP3 playback.
• Master Volume Controller: Ajustează volumul general de ieșire.
• Melodia anterioară/următoare: Navigates tracks during USB or Bluetooth playback.
• Funcția Redare/Pauză: Controls playback for USB or Bluetooth sources.
• Ecran cu LED: Shows current input mode and playback information.

4.2 Conexiuni la panoul din spate

Imagine: Spate view of the Pyle PVTA80 amplifier, detailing the various input and output ports, including CD/DVD inputs, subwoofer output, speaker terminals, and power input.

• CD/DVD Inputs (L/R): RCA jacks for connecting external audio sources like CD/DVD players.
• Ieșire subwoofer: RCA jack for connecting an active subwoofer.
• Ieșiri difuzoare: Binding posts for connecting passive speakers (4-8 ohms).
• AC 120V/240V Input: Power connection for the ampmai în viață.
• 120V / 240V Voltage Selector: Switch to select appropriate voltage pentru regiunea dvs.
• Ventilator de racire: Integrated fan for thermal management.

Imagine: Prim-plan views highlighting the built-in cooling fan, USB reader, and the subwoofer and speaker output connections on the Pyle PVTA80 ampmai în viață.

5. Instrucțiuni de configurare

1. Despachetarea: Îndepărtați cu grijă ampLifter și toate accesoriile din ambalaj.
2. Plasare: Așezați amplifier on a stable, flat surface with adequate ventilation. Ensure the cooling fan is not obstructed.
3. Voltage Selectie: Before connecting the power cable, verify the 120V/240V voltage selector on the rear panel matches your local power supply. Adjust if necessary using a small screwdriver.
4. Conexiune difuzor: Connect your passive speakers to the "Speaker Output" binding posts on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The ampLifer-ul acceptă difuzoare de 4-8 ohmi.
5. Subwoofer Connection (Optional): If using an active subwoofer, connect its input to the "Subwoofer Output" RCA jack on the rear panel.
6. Conexiune sursă audio:
   • For CD/DVD players or other analog sources, connect them to the "CD/DVD Input (L/R)" RCA jacks.
   • For USB playback, insert a USB flash drive into the "USB Reader" port on the front panel.
7. Conexiune de alimentare: Connect the supplied power cable to the AC 120V/240V input on the rear panel, then plug it into a wall outlet.

6. Instrucțiuni de utilizare

1. Pornire: Press the Power ON/OFF switch on the front panel. The LED display will illuminate.
2. Selectarea sursei de intrare: Use the "Input Select" button on the front panel or the remote control to cycle through the available input sources (Bluetooth, USB, CD/DVD). The selected input will be shown on the LED display.
3. Reglarea volumului: Rotate the "Master Volume Controller" knob on the front panel or use the VOL+/- buttons on the remote control to adjust the audio output level.
4. 6.1 Funcționare Bluetooth
   • Select "Bluetooth" as the input source. The LED display will show "BLUE".
   • On your Bluetooth-enabled device (smartphone, tablet, etc.), search for available Bluetooth devices.
   • Select "Pyle Speaker" from the list to pair. A confirmation tone may sound upon successful pairing.
   • După asociere, puteți transmite în flux audio de pe dispozitiv către amplifier. Use your device or the amplifier's controls (Play/Pause, Previous/Next) to manage playback.
   

   Image: The Pyle PVTA80 amplifier with its LED display showing "BLUE", alongside a smartphone indicating a successful Bluetooth connection, demonstrating wireless audio streaming.

5. 6.2 Redare USB
   • Introduceți o unitate flash USB care conține fișiere MP3 files into the "USB Reader" port on the front panel.
   • Select "USB" as the input source. The amplifier will automatically begin playing MP3 files.
   • Use the Play/Pause, Previous/Next buttons on the front panel or remote control to manage playback.
   

   Image: A hand inserting a USB flash drive into the USB port on the front panel of the Pyle PVTA80 amplifier, illustrating the USB playback feature.

6. 6.3 CD/DVD Input
   • Ensure your CD/DVD player or other analog source is connected to the "CD/DVD Input (L/R)" RCA jacks on the rear panel.
   • Select "CD/DVD" as the input source.
   • Begin playback on your connected source device.

7. Întreținere

• curatenie: Utilizați o cârpă moale și uscată pentru a curăța exteriorul ampNu utilizați agenți de curățare lichizi sau solvenți.
• Ventilare: Ensure the cooling fan and ventilation openings are free from dust and obstructions to prevent overheating.
• Tube Care: The vacuum tubes are delicate. Avoid touching them when hot. If replacement is needed, consult a qualified technician.
• Depozitare: Dacă depozitați unitatea pentru o perioadă lungă de timp, deconectați-o de la priză și depozitați-o într-un loc răcoros și uscat.

8. Depanare

9. Specificații

10. Asistență și garanție

For technical support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Pyle webPăstrați dovada achiziției pentru reclamații în garanție.