Introducere
This manual provides essential information for the proper installation, operation, and maintenance of your FLOMEC TM Series Water Meter, model TM10NQ9GMA. This meter is designed for accurate measurement of liquid flow in various applications, including water processing and irrigation. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Informații de siguranță
- Purtați întotdeauna echipament individual de protecție (EIP) adecvat în timpul instalării și întreținerii.
- Ensure the system is depressurized and drained before attempting any installation or service.
- Do not exceed the specified pressure and temperature ratings of the meter.
- Verify proper sealing of all connections to prevent leaks.
- Keep batteries out of reach of children. Dispose of batteries according to local regulations.
Produs terminatview
The FLOMEC TM Series Water Meter is an economical and robust solution for liquid flow measurement. It features a durable schedule 80 PVC housing and a local display that provides real-time flow rate, accumulated total, and a resettable total. The meter supports three engineering units: Gallons, Liters, and Cubic Feet. It is factory-calibrated and battery-operated for ease of use.
Configurare și instalare
The TM10NQ9GMA model features 1-inch Female NPT fittings for straightforward integration into your piping system. Proper installation is crucial for accurate readings and long-term performance.
Pașii de instalare:
- Prepare the Piping: Ensure the pipe section where the meter will be installed is clean and free of debris. The meter requires a straight run of pipe before and after for optimal accuracy.
- Orient the Meter: Observe the flow direction arrow on the meter body. Install the meter so that the arrow aligns with the direction of liquid flow in your system.
- Connect Fittings: Apply appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 1-inch Male NPT threads of your piping. Carefully thread the meter onto the pipe fittings. Do not overtighten, as this can damage the PVC housing.
- Verificați dacă există scurgeri: Slowly pressurize the system and inspect all connections for leaks. Tighten as necessary.
- Instalare baterie: The meter comes with two AAA alkaline batteries pre-installed. If replacement is needed, refer to the Maintenance section.
Instrucțiuni de operare
The FLOMEC TM Series Water Meter is designed for simple operation with its intuitive display and two-button interface.
Funcții de afișare:
- Debit: Shows the instantaneous flow rate of the liquid.
- Total general: Displays the cumulative total volume of liquid that has passed through the meter since its initial installation. This total is non-resettable.
- Total resetabil: Displays a total volume that can be reset for batching or specific measurement periods.
Funcții butoane:
- RATE Button: Press to cycle through display modes, typically showing flow rate.
- TOTAL Button: Press to cycle through totalizer modes (Grand Total, Resettable Total). Hold to reset the Resettable Total.
Schimbarea unităților:
The meter supports Gallons, Liters, and Cubic Feet. Refer to the detailed programming instructions in the full product manual (if available) for specific steps on how to change the displayed units. Typically, this involves a combination of button presses during power-up or a specific menu sequence.
Întreţinere
Regular maintenance ensures the longevity and accuracy of your FLOMEC TM Series Water Meter.
Înlocuire baterie:
The meter operates on two AAA alkaline batteries. When the battery indicator appears on the display, it is time to replace them.
- Ensure the system is depressurized and the meter is accessible.
- Locate the battery compartment on the top of the display unit.
- Scoateți cu grijă șuruburile care fixează capacul bateriei.
- Remove the old AAA batteries and insert two new AAA alkaline batteries, observing correct polarity.
- Replace the battery cover and tighten the screws to ensure a watertight seal.
curatenie:
Periodically clean the exterior of the meter with a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the housing or display.
Depanare
If you encounter issues with your FLOMEC TM Series Water Meter, refer to the following common troubleshooting steps:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Fără afișaj sau afișaj slab iluminat | Baterii descărcate sau descărcate | Înlocuiți bateriile cu baterii alcaline AAA noi. |
| Citiri inexacte | Incorrect installation (e.g., wrong flow direction, insufficient straight pipe run) | Verify meter orientation and ensure adequate straight pipe sections before and after the meter. |
| No flow reading despite liquid flow | Obstruction in the meter or sensor issue | Depressurize and inspect the meter for any blockages. If the issue persists, contact technical support. |
| Scurgeri la conexiuni | Improperly sealed threads or damaged fittings | Depressurize, reapply thread sealant, and retighten connections. Inspect fittings for damage. |
For issues not covered here, please contact FLOMEC customer support.
Specificații
Detailed technical specifications for the FLOMEC TM Series Water Meter (TM10NQ9GMA).
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | TM10NQ9GMA |
| Tipul de montaj | 1 inch Female NPT |
| Intervalul debitului | 5 to 50 Gallons Per Minute (19 to 190 Liters Per Minute) |
| Precizie | ±3.0% din citire |
| Evaluare presiune | 225 PSI at 73°F (pressure rating reduces with higher temperature) |
| Interval de temperatură de funcționare | 32°F până la 140°F (0°C până la 60°C) |
| Unități de afișare | Gallons, Liters, Cubic Feet |
| Sursa de alimentare | Baterii alcaline 2 x AAA |
| Dimensiuni pachet | 8.98 x 4.17 x 3.94 inci |
| Greutatea articolului | 1 Lira |
| Producător | Great Plains Industries |
Garanție și suport
The FLOMEC TM Series Water Meter is manufactured by Great Plains Industries. For specific warranty information, technical support, or service inquiries, please refer to the documentation included with your product or visit the official FLOMEC website. Se recomandă păstrarea dovezii de achiziție pentru reclamațiile în garanție.
