Introducere
Thank you for choosing the Lepro Remote Controller for your Tunable White LED Strip Light. This manual provides detailed instructions for setting up, operating, and maintaining your remote control to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.
Produs terminatview
The Lepro Remote Controller is designed to provide convenient control over your tunable white LED strip lights, allowing you to adjust brightness, color temperature, and activate various lighting modes.

Imagine: față view of the Lepro Remote Controller.
Funcțiile butoanelor telecomenzii

Image: Diagram illustrating the functions of each button on the Lepro Remote Controller.
- Butoane ON/OFF: Power on or off the LED strip light.
- 60S OFF Button: Activates a 60-second auto-off timer.
- Brightness +/- Buttons: Reglați nivelul de luminozitate al luminii.
- WW (Warm White) Button: Setează lumina la o temperatură de culoare alb cald.
- NW (Neutral White) Button: Setează lumina la o temperatură de culoare alb neutru.
- DW (Daylight White) Button: Sets the light to a daylight white (cool white) color temperature.
- Colour Temperature +/- Buttons: Fine-tune the color temperature between warm and cool white.
- Butonul MOD: Cycles through fast/slow flash modes.
- Scene Buttons (Morning/Evening/Night): Activates pre-set lighting scenes.
Înființat
Instalarea bateriei
The remote controller requires 1 Lithium Metal battery (included). Before first use, please remove the insulation sheet from the battery compartment.

Image: Illustration showing how to remove the insulation sheet from the battery compartment.
- Localizați compartimentul bateriei de pe spatele telecomenzii.
- Pull out the plastic insulation sheet if it is present.
- If replacing the battery, open the battery cover and insert the new battery, ensuring correct polarity (+/-).
- Închideți bine capacul bateriei.
Pairing (If Applicable)
This remote control uses Radio Frequency (RF) technology and is typically pre-paired with compatible Lepro tunable white LED strip lights (e.g., models 410098, 410049). If your remote does not respond to the light strip, ensure the light strip is powered on and within the maximum range of 10 meters. No manual pairing procedure is usually required for this model.
Instrucțiuni de operare
Once the battery is installed, you can begin controlling your LED strip light.
- Pornire/Oprire: Apăsați tasta ON button to turn the light on, and the OFF pentru a-l opri.
- Reglarea luminozității: Utilizați Luminozitate +/- buttons (sun icon with up/down arrows) to increase or decrease the light intensity.
- Selectarea temperaturii culorii:
- Presa WW for Warm White.
- Presa NW for Neutral White.
- Presa DW for Daylight White (Cool White).

Image: Visual representation of Warm White, Natural White, and Cool White color temperatures.
- Fine-tuning Color Temperature: Utilizați Colour Temperature +/- buttons (yellow up/down arrows) to incrementally adjust the color temperature.
- Moduri bliț: Apăsați tasta MOD button to cycle through different fast/slow flash modes.
- Moduri de scenă: Select pre-set scenes using the dedicated buttons:
- Morning Scene: (Sunrise icon)
- Evening Scene: (Sunset icon)
- Night Scene: (Moon and stars icon)
- 60-Second Auto Off: Apăsați tasta 60S OPRIT button to activate a timer that will turn off the light after 60 seconds.
Întreţinere
Curatenie
To clean the remote controller, gently wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.
Înlocuirea bateriei
If the remote control's range decreases or it becomes unresponsive, the battery may need to be replaced. Refer to the "Battery Installation" section under Setup for instructions.
Nota: Aruncați bateriile uzate în mod responsabil, conform reglementărilor locale.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Remote not responding to light strip. |
|
|
| Limited range of control. |
|
|
Specificații
- Model: 500014
- Marca: Lepro
- Dimensiuni produs: 8.5 x 4 x 0.7 cm
- Greutate: 20 g
- Baterie: 1 baterie litiu-metal (necesară)
- Tehnologie de conectivitate: Frecvență radio (RF)
- Interval maxim: 10 metri
- Număr de butoane: 14
- Dispozitive compatibile: Lepro LED Strip Light 410098, LED Strip Light 410049
Informații importante
Reciclarea becurilor
Pentru informații despre reciclarea acestui produs și a altor tipuri de deșeuri,amps, please consult local recycling guidelines and facilities.
Informații despre spargerea becului și curățarea
In case of breakage or damage to associated light bulbs, follow proper clean-up and disposal procedures as recommended by local authorities. Avoid direct contact with broken glass or internal components.
Garanție și suport
For warranty information and customer support, please refer to the official Lepro website-ul web sau contactați distribuitorul. Păstrați bonul fiscal ca dovadă a achiziției.
Pentru asistență suplimentară, puteți vizita Lepro Store on Amazon.





