1. Introducere
This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Broadcom MegaRAID 9560-16i Storage Controller. This high-performance RAID controller is designed to manage various storage devices, offering robust data protection and efficient data access for server environments.
2. Produs terminatview
The Broadcom MegaRAID 9560-16i is a 16-channel storage controller supporting SATA 6Gb/s, SAS 12Gb/s, and PCIe 4.0 (NVMe) interfaces. It supports multiple RAID levels including 0, 1, 5, 6, 10, 50, 60, and JBOD, providing flexible storage solutions. The controller features a PCIe 4.0 x8 interface for high bandwidth connectivity.
2.1 Caracteristici cheie
- Connect up to 240 SAS/SATA devices or 24 NVMe devices per controller.
- Low-profile form factor suitable for rack-mounted servers.
- Side-mounted SAS connectors for convenient cable management.
- PCIe 4.0 x8 host interface for high-speed data transfer.
- Support for RAID levels 0, 1, 5, 6, 10, 50, 60, and JBOD.
2.2 Imaginea produsului
Figure 2.1: Broadcom MegaRAID 9560-16i storage controller. This image displays the green circuit board with a large black heatsink covering the main processor, and multiple SAS/SATA ports on the right side. The card also features a PCIe connector at the bottom and a metal bracket for mounting.
3. Configurare și instalare
3.1 Cerințe de sistem
- Available PCIe 4.0 x8 slot or higher.
- Compatible server or personal computer system.
- Operating system with appropriate driver support.
- Sufficient power supply.
3.2 Instalare hardware
- Sistem de oprire: Ensure the computer system is completely powered off and disconnected from the power source.
- Șasiu deschis: Open the computer chassis to access the motherboard and expansion slots.
- Localizați slotul PCIe: Identificați un slot PCIe 4.0 x8 disponibil.
- Insert Controller: Carefully align the Broadcom MegaRAID 9560-16i controller with the PCIe slot and firmly press it down until it is securely seated.
- Card securizat: Secure the controller card with the retention mechanism or screw provided by your chassis.
- Cabluri de conectare: Connect your SAS/SATA/NVMe drives to the appropriate ports on the controller using compatible cables.
- Șasiu închis: Close the computer chassis and reconnect the power.
3.3 Instalarea driverului
After hardware installation, power on the system. You may need to install the appropriate drivers for the Broadcom MegaRAID 9560-16i controller. Drivers are typically available on the Broadcom official support website. Follow the driver installation instructions provided by Broadcom for your specific operating system.
4. Instrucțiuni de utilizare
4.1 Configurare inițială
Upon successful driver installation, the controller will be recognized by your operating system. Initial configuration, such as creating RAID arrays, is typically performed through the controller's BIOS utility during system boot-up or via a software utility provided by Broadcom (e.g., MegaRAID Storage Manager).
4.2 Creating RAID Arrays
- Access the RAID controller's configuration utility during system startup (usually by pressing a specific key like Ctrl+R or Ctrl+H when prompted).
- Select the drives you wish to include in the array.
- Choose the desired RAID level (e.g., RAID 0, 1, 5, 6, 10, 50, 60, or JBOD) based on your performance and redundancy requirements.
- Configure array parameters such as stripe size and cache policy.
- Save the configuration and exit the utility. The system will then recognize the new logical drive.
4.3 Monitoring and Management
Use the Broadcom MegaRAID Storage Manager (MSM) or a similar utility to monitor the health of your RAID arrays and connected drives. This software allows you to view array status, perform maintenance tasks, and receive alerts for potential issues.
5. Întreținere
- Actualizări ale driverului: Regularly check the Broadcom support website for updated drivers and firmware for your MegaRAID controller. Keeping drivers and firmware current can improve performance and stability.
- Sistem de racire: Ensure adequate airflow within your server chassis to prevent overheating of the controller and other components.
- Backup de date: While RAID provides data redundancy, it is not a substitute for regular data backups. Always maintain a robust backup strategy for critical data.
- Inspectie fizica: Periodically inspect the controller and its connections for any signs of damage or loose cables.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Controlerul nu a fost detectat de sistem. | Incorrectly seated in PCIe slot; incompatible slot; power issue; missing drivers. | Ensure controller is fully seated. Try a different PCIe slot. Verify power connections. Install or update drivers. |
| Drives not recognized by controller. | Loose or faulty cables; incompatible drives; drive failure. | Check all data and power cables. Ensure drives are compatible. Test drives individually if possible. |
| Matricea RAID s-a degradat sau a eșuat. | Drive failure; improper configuration. | Identify and replace the failed drive. Rebuild the array using the RAID management utility. Review setările de configurare. |
| System performance issues. | Outdated drivers/firmware; high I/O load; insufficient system resources. | Update drivers and firmware. Optimize RAID array settings. Ensure adequate system RAM and CPU. |
For more detailed troubleshooting, refer to the official Broadcom support documentation or contact Broadcom technical support.
7. Specificații
| Numărul de model | 05-50077-00 |
| Marca | BROADCOM |
| Dimensiunile produsului | 22 x 8 x 3 cm; 252 g |
| Interfață hardware | SAS, SATA, PCIe 4.0 (NVMe) |
| Canale | 16 |
| Niveluri RAID acceptate | 0, 1, 5, 6, 10, 50, 60, JBOD |
| Interfață gazdă | PCIe 4.0 x8 |
| Dispozitive compatibile | Personal Computer (Servers) |
| UPC | 830343007462 |
| ASIN | B08B52PR5Q |
| Data primului disponibil | 18 aprilie 2020 |
8. Garanție și asistență
The Broadcom MegaRAID 9560-16i Storage Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Broadcom website-ul.
For technical support, driver downloads, firmware updates, and additional resources, please visit the Broadcom support portal. It is recommended to have your product model number (05-50077-00) and serial number ready when contacting support.
