1. Introducere
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.
Figure 1: Complete Lepro LED Strip Lights Kit
2. Conținutul pachetului
Verificați dacă toate componentele sunt prezente în pachet:
- 2 x 16.4ft (5m) RGB LED Strip Lights
- 1 x Telecomandă IR cu 44 de taste
- 1 x adaptor de putere 12V
- 1 x Control Box (IR Receiver)
3. Instalare și configurare
Urmați acești pași pentru o instalare corectă:
- Pregătiți suprafața: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
- Măsurați și tăiați (opțional): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
- Atașați banda: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
- Conectați componentele:
- Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
- Connect the 12V power adapter to the control box.
- Conectați adaptorul de alimentare la o priză electrică standard.
- Activare telecomandă: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Figure 2: Connection Diagram for LED Strip Lights
For a visual guide on installation and various applications, please refer to the official product video below:
Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.
4. Instrucțiuni de utilizare
The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.
Figure 3: 44-Key IR Remote Control Layout
Funcții de control de la distanță:
- Pornit/Oprit: Power button to turn the lights on or off.
- Reglarea luminozității: Up/Down arrows to increase or decrease brightness.
- Alegerea culorii: 20 preset static colors, including Red, Green, Blue, and White.
- Culori DIY: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Moduri dinamice: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.
5. Întreținere
Pentru a asigura longevitatea și performanța optimă a benzilor luminoase LED, urmați aceste instrucțiuni de întreținere:
- curatenie: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Mediu: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
- Îngrijirea adezivului: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.
6. Depanare
If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Luminile nu se aprind. |
|
|
| Telecomanda nu funcționează. |
|
|
| Some LEDs show incorrect color or are off. |
|
|
| LED strip falls off surface. |
|
|
7. Specificațiile produsului
| Caracteristică | Detaliu |
|---|---|
| Marca | Lepro |
| Numărul de model | 410084-RGB-US-NF-a |
| Culoare | RGB (roșu, verde, albastru) |
| Utilizare în interior/exterior | De interior |
| Caracteristica specială | Reglabil |
| Tip sursă de lumină | LED |
| Sursa de alimentare | Electric cu fir |
| Material | Cupru, plastic |
| Tip controler | Telecomanda |
| Numărul de surse de lumină | 300 (total for 32.8ft) |
| Voltage | 12 volți |
| Wattage | 36 wați |
| Greutatea articolului | 0.33 kilograme (11.6 uncii) |
| Lungimea articolului | 32.8 Feet (2 x 16.4ft) |
8. Informații despre garanție
Acest produs este acoperit de a 2 an garanție from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9. Asistență pentru clienți
For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.
