1. Introducere
This manual provides essential information for the installation, operation, and maintenance of your Ground Zero Hydrogen GZHW 20XSPL passive subwoofer. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

Figura 1: lateral view of the Ground Zero GZHW 20XSPL Subwoofer, showcasing its robust construction and yellow basket.
2. Informații de siguranță
Respectați întotdeauna următoarele măsuri de siguranță:
- Asigurați-vă că toate conexiunile sunt sigure și izolate corespunzător pentru a preveni scurtcircuitele.
- Nu expuneți subwooferul la umiditate excesivă sau temperaturi extreme.
- Always disconnect power before making any connections or performing maintenance.
- Consultați un instalator profesionist dacă nu sunteți sigur de pașii de instalare.
- Operating at excessively high volumes can cause hearing damage.
3. Configurare și instalare
The Ground Zero GZHW 20XSPL is a passive subwoofer designed for integration into car audio systems or home theater setups. Proper installation is crucial for optimal performance.
3.1 Despachetarea
Carefully remove the subwoofer from its packaging. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.
3.2 Considerații privind montarea
This subwoofer is designed for flush mounting. Ensure the mounting surface is sturdy enough to support the subwoofer's weight (approximately 8.7 kg) and withstand vibrations. The mounting diameter required is 187 mm, and the mounting depth is 145 mm.

Figura 2: Pro lateralfile of the subwoofer, illustrating its compact depth for flush mounting.
3.3 Cablări și conexiuni
The GZHW 20XSPL features a dual voice coil design with an impedance of 2 x 1 Ohm or 2 x 2 ohms. Proper wiring is essential to match your amplifier's capabilities and achieve the desired impedance. Refer to your ampConsultați manualul instalatorului pentru sarcini cu impedanță compatibilă.
- Parallel Wiring (0.5 Ohm or 1 Ohm total): Connect positive terminals of both voice coils together, and negative terminals of both voice coils together. Then connect to the amplifier. This configuration results in a lower impedance.
- Series Wiring (2 Ohm or 4 Ohm total): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. The remaining positive and negative terminals connect to the amplifier. This configuration results in a higher impedance.
Always use high-quality speaker wire of appropriate gauge for the power levels involved. Ensure all connections are tight and free from corrosion.

Figura 3: Spate view of the subwoofer, showing the robust magnet structure and speaker terminals for wiring.
4. Instrucțiuni de utilizare
Once installed, the GZHW 20XSPL subwoofer operates as part of your audio system. Its performance is dependent on the amplifier and audio source it is connected to.
4.1 Manipularea puterii
The subwoofer has a recommended power handling of 300-1500 W, with an RMS power of 700 W and a peak power of 1500 W. It is crucial to match the amplifier's output to these specifications to prevent damage. Underpowering can be as damaging as overpowering, as it can lead to amplifier clipping, which produces distorted signals harmful to the subwoofer.
4.2 Perioada de rodaj
Allow a break-in period of approximately 20-30 hours of normal listening before operating the subwoofer at high volumes. This allows the suspension components (surround and spider) to loosen up and reach their optimal compliance, improving overall performance and longevity.
4.3 Setări audio
Reglați filtrul trece-jos (LPF) de pe amplifier or head unit to properly integrate the subwoofer with your main speakers. A typical LPF setting for subwoofers is between 60 Hz and 100 Hz. Experiment with phase settings (0° or 180°) to achieve the best blend with your other speakers.

Figura 4: Față view of the subwoofer cone, highlighting the reinforced paper cone and 3D logo dustcap.
5. Întreținere
The Ground Zero GZHW 20XSPL subwoofer requires minimal maintenance to ensure its longevity.
- curatenie: Use a soft, dry cloth to wipe down the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Inspecţie: Periodically check the speaker terminals for secure connections and signs of corrosion. Inspect the surround for any cracks or tears.
- Mediu: Keep the subwoofer in a dry environment, away from direct sunlight and extreme temperatures. While not waterproof, it is designed for robust use within typical vehicle or home environments.
6. Depanare
If you experience issues with your GZHW 20XSPL subwoofer, consult the following table before seeking professional assistance.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Nu există sunet de la subwoofer |
|
|
| Sunet distorsionat |
|
|
| Ieșire bas slabă |
|
|
7. Specificatii tehnice
Detailed specifications for the Ground Zero GZHW 20XSPL Subwoofer:
| Caracteristică | Caietul de sarcini |
|---|---|
| Numele modelului | Ground Zero Hydrogen GZHW 20XSPL |
| Numărul de model | 39733433139379 |
| Tip | Subwoofer pasiv |
| Dimensiune | 8 inchi (20 cm) |
| Manevrarea puterii RMS | 700 W |
| Manipularea puterii de vârf | 1500 W |
| Recomandat AmpPuterea mai vie | 300-1500 W |
| Impedanta | 2 x 1 Ohm or 2 x 2 Ohm (Dual Voice Coil) |
| Eficiență (SPL) | 80 dB |
| Bobina vocală | 63 mm Copper |
| Material con | Hârtie armată |
| Surround | Long-throw Sandwich Surround |
| Tip coș | Solid Cast Aluminum |
| Maximum Excursion (Xmax) | 40 mm |
| Diametrul de montare | 187 mm |
| Adâncimea de montare | 145 mm |
| Resonant Frequency (Fs) | 38.3 Hz |
| Q total (Qts) | 0.381 |
| Volum echivalent de aer (Vas) | 4.77 litri |
| Dimensiuni produs (L x l x H) | 200 x 200 x 150 cm (aprox. 8 x 8 x 6 inci) |
| Greutatea produsului | 8.7 kg (aproximativ 19.2 lbs) |
8. Garanție și asistență
For detailed warranty information and technical support, please refer to the official Ground Zero website or contact your authorized Ground Zero dealer. Warranty terms and conditions may vary by region and retailer.
Se recomandă păstrarea dovezii de achiziție pentru a putea face reclamații în garanție.





