Introducere
This manual provides essential information for the proper installation, usage, and maintenance of your Dometic 3106992.062B S/T 45 Degree Bracket Kit. Please read these instructions carefully before proceeding with installation to ensure safe and correct operation. Retain this manual for future reference.
Informații de siguranță
Always observe basic safety precautions when working with tools and hardware. Ensure the installation area is clear and well-lit. Wear appropriate personal protective equipment, such as safety glasses and gloves. If you are unsure about any part of the installation process, consult a qualified professional.
Produs terminatview
The Dometic 3106992.062B S/T 45 Degree Bracket Kit is an automotive part designed for specific installation requirements. It is supplied as a single unit with a total package weight of 4.0 pounds.

Image: Placeholder for the Dometic 3106992.062B S/T 45 Degree Bracket Kit. This image indicates that a product photo is not yet available.
Configurare și instalare
This bracket kit is intended for specific automotive applications. Proper installation is crucial for its function and safety. While specific steps may vary based on the application, general guidelines are provided below.
Instrumente necesare (tipic):
- Wrenches or sockets (appropriate sizes)
- Screwdrivers (Phillips/Flathead, if applicable)
- Bandă de măsurat
- Instrument de marcare
- Burghiu (dacă sunt necesare găuri noi de montare)
Pasi generali de instalare:
- Identificați locația de montare: Determine the precise location where the bracket needs to be installed. Refer to your vehicle or appliance's specific service manual for exact positioning.
- Pregătiți suprafața: Ensure the mounting surface is clean, dry, and free from obstructions.
- Grupa de poziții: Carefully place the 45-degree bracket in the intended position. Verify alignment and orientation.
- Marcați găurile: Use the bracket as a template to mark the locations for mounting holes.
- Găuri (dacă este necesar): If new holes are required, drill pilot holes of the appropriate size.
- Suport securizat: Attach the bracket using appropriate fasteners (not included unless specified by Dometic for your application). Ensure all fasteners are tightened securely to the manufacturer's specifications.
- Verificați stabilitatea: After installation, gently test the bracket's stability to ensure it is firmly attached and does not wobble.
Utilizare și funcție
The Dometic 3106992.062B S/T 45 Degree Bracket Kit serves as a structural support or mounting component. Once correctly installed, it provides a stable and secure attachment point or structural reinforcement at a 45-degree angle, as per its design. This component does not have active operational functions; its purpose is passive support.
Întreţinere
To ensure the longevity and continued performance of your bracket kit, periodic inspection and maintenance are recommended.
- Inspecție regulată: Periodically check the bracket and its mounting points for any signs of wear, corrosion, or loosening of fasteners.
- curatenie: Clean the bracket with a mild soap and water solution, then rinse thoroughly and dry. Avoid abrasive cleaners or solvents that could damage the finish.
- Strângeți elementele de fixare: Re-tighten any loose fasteners to prevent movement or failure.
- Protecție la coroziune: If installed in an environment prone to corrosion, consider applying a suitable corrosion-inhibiting coating or lubricant to exposed metal parts, if appropriate for the material.
Depanare
Most issues related to a bracket kit are typically associated with installation or physical damage.
- Bracket is Loose: Check all mounting fasteners. Ensure they are tightened to the correct torque. Inspect the mounting surface for damage or instability.
- Bracket is Damaged: If the bracket shows signs of bending, cracking, or severe corrosion, it should be replaced immediately to prevent potential failure.
- Incorrect Angle/Position: Re-evaluate the installation steps and ensure the bracket is positioned and oriented correctly according to your application's requirements.
Specificații
| Producător | Dometic |
| Marca | Dometic |
| Numărul de model | 106992062B |
| Numărul piesei | 3106992.062B |
| Tip de produs | PIESE AUTO |
| Cantitate Pachet Articol | 1 |
| Greutatea pachetului articolului | 4.0 lire sterline |
| ASIN | B085MLQFN6 |
| Data primului disponibil | 7 martie 2020 |
Garanție și suport
For specific warranty information regarding the Dometic 3106992.062B S/T 45 Degree Bracket Kit, please refer to the documentation provided with your original purchase or visit the official Dometic website. For technical support or assistance with installation, contact Dometic customer service directly.





