Introducere
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Poolex PC-NAN heat pump. The Poolex Nano heat pump is specifically designed for small pools and offers efficient heating with a high Coefficient of Performance (COP) similar to larger heat pumps.
Informații de siguranță
Please read all safety warnings and instructions carefully before installing and operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Deconectați întotdeauna alimentarea cu energie electrică înainte de a efectua orice operațiune de întreținere sau service.
- Ensure the electrical system is safe and properly grounded.
- Nu utilizați unitatea dacă vreo piesă este deteriorată.
- Țineți copiii și animalele de companie departe de unitate în timpul funcționării.
- Installation must be performed by a qualified professional in accordance with local regulations.
Înființat
The Poolex PC-NAN heat pump is designed for easy installation.
Despachetarea și plasarea
Carefully remove the heat pump from its packaging. Ensure all components are present. Place the unit on a stable, level surface near your pool, allowing adequate air circulation around the unit.
Imagine: față view of the Poolex PC-NAN heat pump, showing the fan grille, control panel, and water inlet/outlet connections.
Conexiune electrica
Connect the heat pump to a conventional electrical socket. The unit comes with a 5-meter power cable equipped with 10mA differential protection for enhanced safety.
Image: Close-up of the 5-meter power cable with integrated differential protection.
Conexiuni de apă
Connect the heat pump to your pool's filtration system using the provided PVC connectors (Ø 32-38). Ensure all connections are secure and leak-free.
Image: A set of PVC connectors and clamps used for connecting the heat pump to the pool's water circulation system.
Image: An outdoor scene showing the Poolex PC-NAN heat pump connected to a small, above-ground wooden pool, demonstrating a typical setup.
Instrucțiuni de operare
Pornire inițială
Once all connections are secure and the pool's filtration system is running, plug in the heat pump. The unit will begin to heat the pool water.
Controlul temperaturii
The heat pump is designed to efficiently raise your pool's temperature. Allow several hours for the water to reach the desired temperature, depending on the pool volume and initial water temperature.
Image: A graphic highlighting the 3000W heating capacity and 600W consumption of the Poolex PC-NAN heat pump, indicating its efficiency.
Economic and Quiet Operation
The Poolex PC-NAN is designed to be economical and quiet during operation, making it suitable for residential use.
Întreţinere
Întreținerea regulată asigură performanța optimă și durata de viață a pompei de căldură.
- Keep the area around the heat pump clear of debris to ensure proper airflow.
- Curățați periodic exteriorul unității cu o lavetă moale șiamp pânză.
- Inspect water connections for leaks and tighten if necessary.
- During winterization, follow specific instructions for draining and storing the unit to prevent frost damage.
Depanare
Unitatea nu se pornește
- Verificați conexiunea de alimentare și asigurați-vă că ștecherul este introdus complet în priză.
- Verify that the differential protection on the power cable has not tripped. Reset if necessary.
- Ensure there is power to the electrical outlet.
Încălzire insuficientă
- Check if the pool's filtration system is running, as the heat pump requires water flow to operate.
- Verify that the ambient air temperature is within the operating range for the heat pump.
- Ensure the heat pump is appropriately sized for your pool volume.
Zgomote neobișnuite
- Check for any obstructions in the fan or around the unit.
- Ensure the unit is placed on a stable and level surface to minimize vibrations.
Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Numărul de model | PC-NAN020 |
| Dimensiune | 3000 wați |
| Tip material | Oţel |
| Material exterior | Plastic |
| Marca | POOLEX |
| Producător | Poolstar |
| ASIN | B084MLDVVZ |
| Prima disponibilă | 19. februarie 2020 |
Garanție și suport
For warranty information and technical support, please refer to the official POOLEX website-ul web sau contactați distribuitorul local. Păstrați bonul fiscal ca dovadă a achiziției.
A detailed installation and usage manual is included with your product to provide further guidance.
