1. Introducere
This manual provides essential information for the safe installation, operation, and maintenance of your SATCO S9950 23 Watt PLL T5 LED Light Bulb. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: The SATCO S9950 23 Watt PLL T5 LED Light Bulb. This image displays the elongated, frosted LED tube with a 2G11 base, designed for efficient lighting.
2. Informații de siguranță
AVERTISMENT: Risc de electrocutare. Instalarea necesită cunoștințe despre sistemele electrice ale corpurilor de iluminat. Dacă nu sunteți calificat, nu încercați instalarea. Contactați un electrician calificat.
- Always turn off power at the circuit breaker before installation, removal, or inspection.
- Acest lamp is designed for Ballast Bypass (Type B) operation. It requires direct wiring to the main voltage. Do not use with a ballast.
- Do not use in fully enclosed luminaires unless specified.
- Asigurați-vă că voltage supply (120-277V) matches the lampcerințele lui.
- Nu dezasamblați sau modificați lamp.
- Evitați să atingeți lamp cu mâinile umede.
- Aruncați lamps conform reglementărilor locale.
3. Produs terminatview și Caracteristici
The SATCO S9950 is a high-efficiency 23 Watt PLL T5 LED light bulb, designed as a direct replacement for traditional fluorescent lamps in ballast bypass applications. It offers significant energy savings and a long lifespan.
- Model: S9950
- Wattage: 23 wați
- Tip de bază: 2G11
- Ieșire lumen: 2800 lumeni
- Temperatura de culoare: 3500K (alb neutru)
- Voltage: 120-277 volți
- Tip: Ballast Bypass (Type B)
- Caracteristica: Frosted finish for diffused light
4. Setup and Installation (Ballast Bypass)
Acest LED lamp operates on a ballast bypass system, meaning the existing ballast must be removed or bypassed, and the lamp wired directly to the main voltage supply. Professional installation is recommended.
- Opriți alimentarea: Locate the circuit breaker controlling the fixture and turn off the power supply. Verify power is off using a voltage tester.
- Remove Existing Lamp: Carefully remove the old fluorescent lamp din corpul de iluminat.
- Bypass/Remove Ballast:
- Open the fixture to access the wiring compartment.
- Disconnect all wires leading to and from the existing ballast.
- Remove the ballast from the fixture.
- Rewire the fixture to provide direct AC line voltage la lamp holders. For a 2G11 base, ensure the live (L) and neutral (N) wires are connected to the appropriate pins on the lamp holder. Refer to the fixture's wiring diagram or consult a qualified electrician.
- Instalați LED-ul Lamp: Insert the SATCO S9950 LED lamp into the 2G11 lamp holder, ensuring it is securely seated.
- Restabiliți puterea: Close the fixture cover and restore power at the circuit breaker.
- Test: Porniți întrerupătorul de lumină pentru a confirma funcționarea corectă.
Notă: Acest lamp is designed for single-ended power input. Ensure wiring is configured correctly for the 2G11 base.
5. Instrucțiuni de utilizare
Once installed, the SATCO S9950 LED light bulb operates like any standard light source. Simply use the wall switch or fixture control to turn the light on or off.
- Asigurați-vă că sursa de alimentare se încadrează în volumul specificattage gama (120-277V).
- Avoid frequent on/off cycling, though LED lamps are generally robust to this.
6. Întreținere
The SATCO S9950 LED light bulb requires minimal maintenance.
- curatenie: Before cleaning, ensure the power is off and the lamp is cool. Wipe the frosted surface with a soft, dry, or slightly damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Înlocuire: Când lamp reaches the end of its lifespan, follow the "Setup and Installation" steps in reverse to safely remove and replace it. Ensure power is off before handling.
7. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lamp nu se aprinde. |
|
|
| Lamp pâlpâie. |
|
|
8. Specificații
| Atribut | Valoare |
|---|---|
| Marca | Satco |
| Numărul de model | S9950 |
| Tip de lumină | LED |
| Wattage | 23 wați |
| Echivalent incandescent Wattage | 40 wați |
| Dimensiunea formei becului | T5 1/2 |
| Tip de bază | 2G11 |
| Caracteristica specială | Mată |
| Culoare deschisă | Neutral alb |
| Temperatura de culoare | 3500 Kelvin |
| Luminozitate | 2800 lumeni |
| Voltage | 120-277 volți |
| Sursa de alimentare | Electric cu fir |
| Indicele de redare a culorilor (CRI) | 80 |
| Eficienţă | 122 lumeni/Watt |
| Material | Cupru (componente interne) |
| Dimensiunile produsului | 25 x 7 x 7 inches (packaging/overall dimensions, bulb itself is elongated) |
| Greutatea articolului | 14.4 uncii |
| Utilizare în interior/exterior | Outdoor (suitable for appropriate fixtures) |
9. Garanție și asistență
For warranty information or technical support regarding your SATCO S9950 LED light bulb, please refer to the official Satco website-ul lor web sau contactați direct serviciul lor de asistență pentru clienți. Păstrați bonul fiscal pentru reclamații în garanție.
Producător: Satco
Website: www.satco.com
